2012 Chrysler 300 Ignition Parts

Engine:

Showing parts for every engine. Select an engine to see only what fits.

76 Ignition parts are listed for the 2012 Chrysler 300, in 10 part types, covering all 3 engine options (3.6L V6, 5.7L V8 and 6.4L V8). Each one has a brand, a manufacturer part number and notes that say where it fits.

The ignition system on the 2012 Chrysler 300 delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules. The largest groups are Ignition Coil (22 parts), Camshaft Position Sensor (15 parts) and Crankshaft Position Sensor (14 parts). The other 7 part types cover the remaining 25 parts.

Camshaft Position Sensor

Economy

Brand Part Number Markets Notes Buy
STANDARD MOTOR PRODUCTS Popular Fits: 3.6L V6 PC950T
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
T-Series
View on
Amazon
HOLSTEIN Fits: 3.6L V6 2CAM0371
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon
PRENCO Fits: 3.6L V6 4E1233
🇺🇸 US 🇨🇦 CA
View on
Amazon
ULTRA-POWER Fits: 3.6L V6 5S12863
🇺🇸 US 🇨🇦 CA
View on
Amazon
UNITED MOTOR PRODUCTS Fits: 3.6L V6 CAM316
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon
VEMO Fits: 3.6L V6 V33720120
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
DELPHI Popular Fits: 3.6L V6 SS11382
🇺🇸 US 🇨🇦 CA
View on
Amazon
MOPAR Popular Fits: 3.6L V6 5149141AF
🇺🇸 US 🇨🇦 CA
Includes Mounting Bolt
Fitment notes — MOPAR 5149141AF
Includes Mounting Bolt
Fits:
VVT Engine.Sedan or VVT Engine.SedanAWD
or:
VVT Engine.SedanRight Hand Drive
View on
Amazon
ASTEMO / HITACHI Fits: 3.6L V6 CPS0020
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon
HELLA Fits: 3.6L V6 358380701
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon
NTK Fits: 3.6L V6 EC0125
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Possible relearn procedure required. Consult your factory service information resource for additional information.
View on
Amazon
STANDARD MOTOR PRODUCTS Fits: 3.6L V6 PC950
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon
WALKER PRODUCTS Fits: 3.6L V6 2351246
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Sensor Only
View on
Amazon
WALKER PRODUCTS Fits: 3.6L V6 2352403
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Combo KitTerminal Type: Spade
View on
Amazon
WELLS Fits: 3.6L V6 5S12863
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon

This table covers the sensors that report camshaft position to the ECU. Typical signs include a stall, a no-start, or a code for cam or crank correlation. Check the connector and the reluctor gap before replacing the sensor.

Camshaft Position Sensor Seal

Brand Part Number Markets Notes Buy
ELRING Fits: 3.6L V6 523950
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Fits UpperAWD
Fitment notes — ELRING 523950
Fits:
UpperAWDLimitedBody code: LX
or:
UpperBase ModelBody code: LX
View on
Amazon

This table covers the seals at the Camshaft Position Sensor. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Condenser / Capacitor

Brand Part Number Markets Notes Buy
MOPAR Fits: 3.6L V6 56028644AC
🇺🇸 US 🇨🇦 CA
Fits VVT Engine.Sedan or VVT Engine.
Fitment notes — MOPAR 56028644AC
Fits:
VVT Engine.Sedan or VVT Engine.SedanAWD
or:
VVT Engine.SedanRight Hand Drive
View on
Amazon
WELLS Fits: 3.6L V6 1B1018
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon

This table covers the capacitors used in this electrical or A/C circuit.

Crankshaft Position Sensor

Economy

Brand Part Number Markets Notes Buy
HOLSTEIN Popular Fits: 3.6L V6 2CRK0351
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon
PRENCO Fits: 3.6L V6 4D1290
🇺🇸 US 🇨🇦 CA
View on
Amazon
SPECTRA PREMIUM Fits: 3.6L V6 S10404
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon
UNITED MOTOR PRODUCTS Fits: 3.6L V6 CRK381
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
MOPAR Popular Fits: 3.6L V6 5149167AD
🇺🇸 US 🇨🇦 CA
Fits VVT Engine.Sedan or VVT Engine.
Fitment notes — MOPAR 5149167AD
Fits:
VVT Engine.Sedan or VVT Engine.SedanAWD
or:
VVT Engine.SedanRight Hand Drive
View on
Amazon
STANDARD MOTOR PRODUCTS Popular Fits: 3.6L V6 PC893
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon
ASTEMO / HITACHI Fits: 3.6L V6 CPS0238
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon
DELPHI Fits: 3.6L V6 SS11407
🇺🇸 US 🇨🇦 CA
View on
Amazon
NTK Fits: 3.6L V6 EH0056
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Possible relearn procedure required. Consult your factory service information resource for additional information.
View on
Amazon
WALKER PRODUCTS Fits: 3.6L V6 2351560
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Sensor Only
View on
Amazon
WALKER PRODUCTS Fits: 3.6L V6 2352403
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Combo KitTerminal Type: Spade
View on
Amazon
WELLS Fits: 3.6L V6 5S12471
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon
Brand Part Number Markets Notes Buy
DORMAN Fits: 3.6L V6 917749
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon
WALKER PRODUCTS Fits: 3.6L V6 2352413
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Combo KitTerminal Type: Pin
View on
Amazon

This table covers the sensors that report crankshaft position and engine speed. Typical signs include a stall, a no-start, or a code for cam or crank correlation. Check the connector and the reluctor gap before replacing the sensor.

Ignition Coil

Economy

Brand Part Number Markets Notes Buy
AUTOTECNICA Fits: 3.6L V6 CY1319585
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon
FVP Fits: 3.6L V6 UF648F
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Mounting Hardware Included: YES
View on
Amazon
HOLSTEIN Fits: 3.6L V6 2IGC0135
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon
SKP Fits: 3.6L V6 SKIC138
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon
SPECTRA PREMIUM Fits: 3.6L V6 C894
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Ignition Coil Mounts to Cylinder Head
View on
Amazon
STANDARD MOTOR PRODUCTS Fits: 3.6L V6 UF648T
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
T-Series
View on
Amazon
STANDARD MOTOR PRODUCTS Fits: 3.6L V6 UF648TK6
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
T-Series
Fitment notes — STANDARD MOTOR PRODUCTS UF648TK6
T-Series
For COP systems
View on
Amazon
VEMO Fits: 3.6L V6 V33700003
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Number of Poles: 2
View on
Amazon
WAI GLOBAL Fits: 3.6L V6 CUF648
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon

Premium

Brand Part Number Markets Notes Buy
ASTEMO / HITACHI Popular Fits: 3.6L V6 IGC0178
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Coil Type: Individual
View on
Amazon
DELPHI Popular Fits: 3.6L V6 GN10616
🇺🇸 US 🇨🇦 CA
View on
Amazon
STANDARD MOTOR PRODUCTS Fits: 3.6L V6 UF648
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Blue Streak
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
BOSCH Popular Fits: 3.6L V6 0221504048
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon
DENSO Popular Fits: 3.6L V6 6735203
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Direct Ignition Coil or Coil On Plug
View on
Amazon
WELLS Popular Fits: 3.6L V6 5C1848
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Requires External Resistor: YES
View on
Amazon
BECK/ARNLEY Fits: 3.6L V6 1788548
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon
MOPAR Fits: 3.6L V6 5149168AJ
🇺🇸 US 🇨🇦 CA
Includes Mounting Screw
Fitment notes — MOPAR 5149168AJ
Includes Mounting Screw
Fits:
VVT Engine.Sedan or VVT Engine.SedanAWD
or:
VVT Engine.SedanRight Hand Drive
View on
Amazon
NGK Fits: 3.6L V6 48755
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon
NGK Fits: 3.6L V6 49724
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon
UNITED MOTOR PRODUCTS Fits: 3.6L V6 COP556
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Mounting Hardware Included: No
View on
Amazon
WALKER PRODUCTS Fits: 3.6L V6 9212193
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Single Coil
View on
Amazon
WALKER PRODUCTS Fits: 3.6L V6 92841126
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Coil Set
View on
Amazon

This table covers the coils that fire each spark plug. Typical signs include a misfire that follows one cylinder, a snap in damp weather, or a coil that is swollen or cracked. Swap a suspect coil with a neighbor to confirm, then replace boots that tore on the way off.

Spark Plug

Summary: Notes include pre-set gaps of 0.032", 0.035", 0.040", 0.041", 0.043" and 0.044". Replacement brands in this table include NGK, DENSO and CHAMPION.

Iridium (lasts up to 4x longer than Copper / Nickel)

Brand Part Number Markets Notes Buy
CHAMPION Popular Fits: 3.6L V6 9407
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
IridiumPre-Set Gap: 0.041"
Fitment notes — CHAMPION 9407
IridiumPre-Set Gap: 0.041"
OE-Recommended Gap: 0.043"
View on
Amazon
NGK Popular Fits: 3.6L V6 93175
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Iridium IXReach: 26.5 mm
Fitment notes — NGK 93175
Iridium IXReach: 26.5 mm
OE-Recommended Gap: 0.044 in
View on
Amazon
BOSCH Fits: 3.6L V6 96337
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
OE Fine Wire Double IridiumPre-Set Gap: 0.040"
Fitment notes — BOSCH 96337
OE Fine Wire Double IridiumPre-Set Gap: 0.040"
OE Is Iridium
View on
Amazon
DENSO Fits: 3.6L V6 5353
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Iridium PowerPre-Set Gap: 0.035"
Fitment notes — DENSO 5353
Iridium PowerPre-Set Gap: 0.035"
Gap .035
View on
Amazon
DENSO Fits: 3.6L V6 5356
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Iridium PowerPre-Set Gap: 0.035"
View on
Amazon
DENSO Fits: 3.6L V6 3461
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Iridium Long LifePre-Set Gap: 0.044"
Fitment notes — DENSO 3461
Iridium Long LifePre-Set Gap: 0.044"
Gap .044
View on
Amazon
MOPAR Fits: 3.6L V6 SP149125AD
🇺🇸 US 🇨🇦 CA
Fits VVT Engine., GAS ModelSedan or VVT Engine., Engine
Fitment notes — MOPAR SP149125AD
Fits:
VVT Engine., GAS ModelSedan or VVT Engine., EngineGasSedanAWD
or:
VVT Engine., EngineGasSedanRight Hand Drive
View on
Amazon
NGK Fits: 3.6L V6 9723
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Laser Iridium High IgnitabilityPre-Set Gap: 0.044"
Fitment notes — NGK 9723
Laser Iridium High IgnitabilityPre-Set Gap: 0.044"
OE-Recommended Gap: 0.044 in
View on
Amazon

Platinum (lasts up to 2x longer than Copper / Nickel)

Brand Part Number Markets Notes Buy
NGK Fits: 3.6L V6 97390
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
G-PowerPre-Set Gap: 0.040"
Fitment notes — NGK 97390
G-PowerPre-Set Gap: 0.040"
OE-Recommended Gap: 0.044 in
View on
Amazon

Ruthenium (maximum durability & ignitability)

Brand Part Number Markets Notes Buy
NGK Fits: 3.6L V6 94705
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Ruthenium HX High IgnitabilityPre-Set Gap: 0.032"
Fitment notes — NGK 94705
Ruthenium HX High IgnitabilityPre-Set Gap: 0.032"
OE-Recommended Gap: 0.044 in
View on
Amazon

This table covers the spark plugs for this engine. Typical signs include misfire under load, rough idle, or a flashing check-engine light. Verify the gap even on pre-gapped plugs, and replace coil boots that come off a high-mileage engine.

Spark Plug / Ignition Coil Boot

Economy

Brand Part Number Markets Notes Buy
STANDARD MOTOR PRODUCTS Fits: 3.6L V6 20481
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Federal Wire
View on
Amazon
UNITED MOTOR PRODUCTS Fits: 3.6L V6 9027S
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon
WALKER PRODUCTS Fits: 3.6L V6 900P2085
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
NGK Popular Fits: 3.6L V6 58965
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon
STANDARD MOTOR PRODUCTS Popular Fits: 3.6L V6 SPP156E
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon
ACDELCO Fits: 3.6L V6 16113
🇺🇸 US 🇨🇦 CA
Gold
View on
Amazon
DENSO Fits: 3.6L V6 6716309
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Direct Ignition Coil Boot Kit6 Boots
Fitment notes — DENSO 6716309
Direct Ignition Coil Boot Kit6 Boots
GASCoil On Plug Boot Set
View on
Amazon

This table covers the silicone and rubber boots that insulate the coil-to-plug spark path. Typical signs include a misfire in the rain, carbon tracking on the boot, or a snap when you pop the coil off. Replace boots as a set on a high-mileage engine; one cracked boot will take the coil with it.

Spark Plug Gasket

Brand Part Number Markets Notes Buy
MOPAR Fits: 3.6L V6 5184778AB
🇺🇸 US 🇨🇦 CA
Spark Plug Well Gasket
Fitment notes — MOPAR 5184778AB
Spark Plug Well Gasket
Fits:
LeftGasSedan
or:
RightGasSedan
or:
LeftGAS ModelSedan
or:
RightGasCylinder Head CoverSedan
or:
LeftGAS ModelCylinder Head CoverSedan
or:
RightGasSedanAWD
or:
LeftGasSedanAWD
or:
RightGasSedanRight Hand Drive
or:
LeftGasSedanRight Hand Drive
or:
LeftGasCylinder Head CoverSedanAWD
or:
RightGasCylinder Head CoverSedanRight Hand Drive
or:
RightGasCylinder Head CoverSedanAWD
or:
LeftGAS ModelCylinder Head CoverSedanRight Hand Drive
View on
Amazon

This table covers the gaskets that seal the Spark Plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Spark Plug Tube

Brand Part Number Markets Notes Buy
MELLING Fits: 3.6L V6 MSPT12
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon
MOPAR Fits: 3.6L V6 5184436AD
🇺🇸 US 🇨🇦 CA
Fits GasSedan
Fitment notes — MOPAR 5184436AD
Fits:
GasSedanAWD
or:
GasSedanRight Hand Drive
View on
Amazon

This table covers the Spark Plug tubes.

Spark Plug Tube Seal

Brand Part Number Markets Notes Buy
AUTOTECNICA Fits: 3.6L V6 CY1416169
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon
ELRING Fits: 3.6L V6 085710
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Fits innerAWD
Fitment notes — ELRING 085710
Fits:
innerAWDLimitedBody code: LX
or:
innerBase ModelBody code: LX
View on
Amazon

This table covers the seals at the Spark Plug Tube. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Buying Ignition Parts for a 2012 Chrysler 300

On this vehicle, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules.

  • Match the engine first. Every ignition part here is engine-specific; each row shows which engine(s) it fits.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Ignition Coil and Camshaft Position Sensor .

Frequently Asked Questions

How many ignition parts fit the 2012 Chrysler 300?

Our catalog currently lists 76 ignition parts for the 2012 Chrysler 300 across 10 subcategories and 27 brands, covering all 3 engine options (3.6L V6, 5.7L V8 and 6.4L V8). Each part is matched to the engine(s) it fits.

Do ignition parts differ between 2012 Chrysler 300 engines?

Yes. Every ignition part on this page is engine-specific. Each row shows which engine(s) it fits — use the filter at the top to hide the rest. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.

What are the signs of ignition problems on a 2012 Chrysler 300?

Common symptoms include misfires under load, rough idle, flashing check-engine light, or poor starting in damp weather. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What spark-plug gap is listed for the 2012 Chrysler 300?

Notes on this page include pre-set gaps of 0.032", 0.035", 0.040", 0.041", 0.043" and 0.044". Still verify against spec — even “pre-gapped” plugs should be checked before they go in.

What should I replace at the same time?

Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2012 Chrysler 300 was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 2012 Chrysler 300?

First match the engine — each row shows which engine(s) the part fits. Then gap matters even on “pre-gapped” plugs — verify against spec, and replace coil boots when they come off a high-mileage engine. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 2012 Chrysler 300

Ignition Parts for Other Chrysler 300 Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.