2012 Chrysler 300 Automatic Transmission Parts

This table covers the Automatic Transmission assemblies. Read more

This group shows a single part: MOPAR R8149641AL.

This table covers the control units that command automatic-transmission shifts. Read more

2 Automatic Transmission Control Unit (TCU) parts for the 2012 Chrysler 300 come from 2 brands — MOPAR and VEMO.

Part numbers include MOPAR 5150730AE and VEMO V33860001.

This table covers the transmission or transfer-case housings. Read more

One part is listed for the 2012 Chrysler 300 — MOPAR 52108099AB.

This table covers the vents on a transmission or axle housing. Read more

2 Case Vent parts for the 2012 Chrysler 300 come from MOPAR.

This group includes MOPAR 5127707AB and MOPAR 5143951AA.

This table covers the Clutch plates. Typical signs include warpage, cracks, or a plate that no longer locates the assembly. Confirm which plate the notes describe — backing plates, clutch plates and strike plates are different parts. Read more

2 Clutch Plate parts for the 2012 Chrysler 300 come from MOPAR.

Listed part numbers: MOPAR 52108315AA and MOPAR 68039901AA.

This table covers the clutch-plate packs inside the transmission or transfer case. Read more

RAYBESTOS POWERTRAIN supplies the 4 Clutch Plate Pack parts for the 2012 Chrysler 300.

The Friction Plate Pack section lists 3 options from RAYBESTOS POWERTRAIN — grouped under the catalog's "Friction Plate Pack" designation — the notes column spells out what sets them apart. RAYBESTOS POWERTRAIN FRMZF18 is listed in this group.

In the Steel Plate Pack grade, RAYBESTOS POWERTRAIN supplies 1 part: grouped under the catalog's "Steel Plate Pack" designation — the notes column spells out what sets them apart. A representative part number is RAYBESTOS POWERTRAIN STMZF18.

Part numbers include RAYBESTOS POWERTRAIN FRMZF18, RAYBESTOS POWERTRAIN RGPZ278 and RAYBESTOS POWERTRAIN RHT96283, among others listed above.

This table covers the Conductor plates. Typical signs include warpage, cracks, or a plate that no longer locates the assembly. Confirm which plate the notes describe — backing plates, clutch plates and strike plates are different parts. Read more

7 Conductor Plate parts for the 2012 Chrysler 300 come from 6 brands — SKP, DORMAN, ULTRA-POWER and 3 other brands. The "Popular" part is SKP SK917678.

The Economy section lists 5 options from SKP, DORMAN, ULTRA-POWER and 1 other brand — the catalog's value-priced group. SKP SK917678 is listed in this group.

In the Standard Replacement grade, STANDARD MOTOR PRODUCTS and NTK supply 2 parts: built to original-equipment specification. A representative part number is STANDARD MOTOR PRODUCTS TCP01.

Part numbers include SKP SK917678, DORMAN 917678 and SKP SK917679, among others listed above.

This table covers the Dipstick / Fluid Filler tubes. Read more

3 Dipstick / Fluid Filler Tube parts are listed for the 2012 Chrysler 300, from MOPAR and DORMAN.

Part numbers include DORMAN 917327, MOPAR 4627311AC and MOPAR 4627311AB.

This table covers the seals at the Extension Housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

7 Extension Housing Seal parts for the 2012 Chrysler 300 come from 2 brands — NATIONAL and WJB / INMOTION PARTS. The "Popular" part is NATIONAL 224250.

This group includes NATIONAL 224250, NATIONAL 710486 and NATIONAL 710940 and the remaining parts above.

This table covers the replacement filters for this application — the table heading and notes say which circuit. Typical signs include restricted flow — long cranking, weak airflow, or dirty fluid after a short interval. Seat the new filter so it cannot bypass, and use the grade the notes call for. Read more

16 Filter parts are listed for the 2012 Chrysler 300, from ATP, VAICO, ELRING and 7 other brands. ACDELCO TF357 carries the "Popular" badge.

The Basic Kit (Without Transmission Fluid) section lists 1 option from VAICO — grouped under the catalog's "Basic Kit (Without Transmission Fluid)" designation — the notes column spells out what sets them apart. VAICO V302254BEK is listed in this group.

Economy: 5 parts, from ELRING, ATP, DORMAN and 1 other brand. A representative part number is ATP TF217.

The Standard Replacement section: 10 options from ATP, MOPAR, ACDELCO and 4 other brands. ACDELCO TF357 is listed in this group.

This table covers the Flexplate Mounting bolts. Read more

This group shows a single part: DORMAN 14131.

This table covers the Fluid Cooler Control valves. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

2 Fluid Cooler Control Valve parts for the 2012 Chrysler 300 come from DORMAN.

Part numbers include DORMAN 624651 and DORMAN 724652.

This table covers the Fluid Cooler Line hoses. Typical signs include swelling, cracks, a soft spot, or a leak at a clamp. Replace adjacent aged hoses while the system is drained — they share the same heat cycle. Read more

3 Fluid Cooler Line / Hose parts are listed for the 2012 Chrysler 300, from SUNSONG and DORMAN.

This group includes DORMAN 624196, SUNSONG 5801755 and SUNSONG 5802128.

This table covers the harness connectors at the Fluid Cooler Line / Hose. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 Fluid Cooler Line / Hose Connector parts for the 2012 Chrysler 300 come from 3 brands — DORMAN, FOUR SEASONS and HAYDEN.

This group includes DORMAN 800723, FOUR SEASONS 53024 and HAYDEN 397.

This table covers the pans that hold automatic-transmission fluid. Read more

10 Fluid Pan parts for the 2012 Chrysler 300 come from 8 brands — DORMAN, MOPAR, ZF and 5 other brands. The "Popular" part is DORMAN 265853.

This table covers the Fluid Pan bolts. Read more

One part is listed for the 2012 Chrysler 300 — ATP ZX223.

This table covers the gaskets that seal the Fluid Pan. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

8 Fluid Pan Gasket parts are listed for the 2012 Chrysler 300, from ELRING, FEL-PRO, MOPAR and 1 other brand. FEL-PRO TOS18764 carries the "Popular" badge.

This group includes FEL-PRO TOS18764, MAHLE / CLEVITE W32819 and ELRING 295540 and the remaining parts above.

This table covers the Fluid pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit. Read more

MOPAR supplies the 3 Fluid Pump parts for the 2012 Chrysler 300.

Listed part numbers: MOPAR R8087860AA, MOPAR RL087860AA and MOPAR RL146823AA.

This table covers the Fluid Pump O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

One part is listed for the 2012 Chrysler 300 — MOPAR 52107900AA.

This table covers the seals at the Fluid Pump. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

6 Fluid Pump Seal parts for the 2012 Chrysler 300 come from 5 brands — NATIONAL, WJB / INMOTION PARTS, BCA and 2 other brands. The "Popular" part is NATIONAL 710608.

This group includes NATIONAL 710608, WJB / INMOTION PARTS WS710608 and BCA NS710608 and the remaining parts above.

This table covers the gasket kits for this job. Typical signs include the leaks that sent this assembly to the bench. Confirm the kit matches the opening you are sealing; unused leftover pieces often belong to another configuration. Read more

This group shows a single part: VICTOR REINZ 711917000.

This table covers the Input shafts. Read more

One part is listed for the 2012 Chrysler 300 — MOPAR 52108044AA.

This table covers the seals at the Input Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Input Shaft Seal parts for the 2012 Chrysler 300 come from 2 brands — ELRING and SKF.

Part numbers include ELRING 096490 and SKF 16896.

This table covers the seals at the Manual Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Manual Shaft Seal parts for the 2012 Chrysler 300 come from 2 brands — NATIONAL and WJB / INMOTION PARTS.

Part numbers include NATIONAL 711035, NATIONAL 710780 and WJB / INMOTION PARTS WS710780, among others listed above.

This table covers the O-rings and seals at this joint. Read more

2 O-Rings & Seals parts for the 2012 Chrysler 300 come from ELRING.

This group includes ELRING 428390 and ELRING 821470.

This table covers the Output Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

4 Output Shaft Bearing parts for the 2012 Chrysler 300 come from 4 brands — WJB / INMOTION PARTS, BCA, NATIONAL and 1 other brand.

The Economy section: 1 option from WJB / INMOTION PARTS. WJB / INMOTION PARTS RB6206 is listed in this group.

Standard Replacement: 3 parts, from BCA, NATIONAL and SCHAEFFLER. A representative part number is BCA NB206.

Part numbers include WJB / INMOTION PARTS RB6206, BCA NB206 and NATIONAL 206, among others listed above.

This table covers the seals at the Output Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

5 Output Shaft Seal parts are listed for the 2012 Chrysler 300, from SKF, WJB / INMOTION PARTS and NATIONAL. SKF 16521 carries the "Popular" badge.

Part numbers include SKF 16521, NATIONAL 710671 and SKF 17532A, among others listed above.

This table covers the Piston kits. Read more

2 Piston Kit parts for the 2012 Chrysler 300 come from PA CARGO.

Part numbers include PA CARGO 92912 and PA CARGO 61837A.

This table covers the Plug adapters. Read more

2 Plug Adapter parts for the 2012 Chrysler 300 come from 2 brands — DORMAN and STANDARD MOTOR PRODUCTS.

Listed part numbers: DORMAN 917505 and STANDARD MOTOR PRODUCTS TCPA01.

This table covers the rebuild kits for this assembly. Read more

4 Rebuild Kit parts for the 2012 Chrysler 300 come from 2 brands — VEMO and TRANSTEC.

Part numbers include TRANSTEC 81000217, VEMO V33860002 and VEMO V33860003, among others listed above.

This table covers the wear sleeves used to restore a grooved seal surface. Read more

2 Repair Sleeve parts for the 2012 Chrysler 300 come from 2 brands — SCHAEFFLER and SKF.

Listed part numbers: SCHAEFFLER SR3502 and SKF 99182.

This table covers the Shift cables. Typical signs include a stretched or frayed cable, or a control that no longer reaches the end of its travel. Route the new cable through the same clips. A kinked cable binds and fails early. Read more

This group shows a single part: SKP SK4578758.

This table covers the Shift Improvement kits. Read more

2 Shift Improvement Kit parts are listed for the 2012 Chrysler 300, from SONNAX and TRANSGO.

This group includes SONNAX ZF8ZIP and TRANSGO SK7226A.

This table covers the wear sleeves used to restore a Shift Shaft seal surface. Read more

This group shows a single part: SKF 99049.

This table covers the seals at the Shift Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Shift Shaft Seal parts for the 2012 Chrysler 300 come from 2 brands — SCHAEFFLER and SKF.

Part numbers include SCHAEFFLER SS6528 and SKF 4692.

This table covers the Shift solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

6 Shift Solenoid parts for the 2012 Chrysler 300 come from 3 brands — MOPAR, STANDARD MOTOR PRODUCTS and WELLS. The "Popular" part is STANDARD MOTOR PRODUCTS TCS209.

Listed part numbers: STANDARD MOTOR PRODUCTS TCS209, STANDARD MOTOR PRODUCTS TCS208 and MOPAR 52108314AB, plus the other parts above.

This table covers the Sun gears. Read more

This group shows a single part: MOPAR 52108078AA.

This table covers the Torque converters. Typical signs include a sulfur smell, rattling substrate, or an efficiency code. Confirm CARB vs Federal certification in the notes before ordering. Read more

5 Torque Converter parts are listed for the 2012 Chrysler 300, from MOPAR and TC REMANUFACTURING.

Part numbers include MOPAR 68144195AA, MOPAR R8078840AA and MOPAR RL078840AA, among others listed above.

This table covers the Torque Converter bolts. Read more

This group shows a single part: DORMAN 13875.

This table covers the Torque Converter Clutch solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

2 Torque Converter Clutch Solenoid parts are listed for the 2012 Chrysler 300, from STANDARD MOTOR PRODUCTS and WELLS.

Listed part numbers: STANDARD MOTOR PRODUCTS TCS331 and WELLS 2N1257.

This table covers the Torque Converter housings. Read more

This group shows a single part: MOPAR 52108683AA.

This table covers the automatic-transmission fluids specified for this gearbox. Typical signs include harsh or delayed shifts, fluid that smells burnt, or a shudder at light throttle. Use exactly the specification in the notes. Automatic transmissions are unforgiving of the wrong fluid. Read more

16 Transmission Fluid parts are listed for the 2012 Chrysler 300, from VALVOLINE, LIQUI MOLY, ZF and 4 other brands. MOPAR 68218057AC carries the "Popular" badge.

In the ATF +4 grade, MOPAR supplies 1 part: grouped under the catalog's "ATF +4" designation — the notes column spells out what sets them apart. A representative part number is MOPAR 68218057AC.

In the Multi-Vehicle grade, VALVOLINE, LIQUI MOLY and MOBIL supply 7 parts: grouped under the catalog's "Multi-Vehicle" designation — the notes column spells out what sets them apart. A representative part number is MOBIL 126505.

In the ZF Fluid grade, ZF, PENTOSIN, MOPAR and 1 other brand supply 7 parts: grouped under the catalog's "ZF Fluid" designation — the notes column spells out what sets them apart. A representative part number is MOPAR 68218925AB.

1 ungrouped part is not assigned to a grade, with the same engine-level match.

This table covers the conditioners and additives used with this transmission fluid. Read more

LUBEGARD supplies the 7 Transmission Fluid Additive parts for the 2012 Chrysler 300. LUBEGARD 19610 carries the "Popular" badge.

Part numbers include LUBEGARD 19610, LUBEGARD 60902 and LUBEGARD 19689, among others listed above.

This table covers the mounts that hold the transmission to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

6 Transmission Mount parts for the 2012 Chrysler 300 come from 5 brands — DEA / MARMON RIDE CONTROL, SKP, ANCHOR and 2 other brands. The "Popular" part is ANCHOR 3163.

The Economy section: 1 option from SKP. SKP SKM3163 is listed in this group.

Standard Replacement: 5 parts, from DEA / MARMON RIDE CONTROL, ANCHOR, PIONEER and 1 other brand. A representative part number is ANCHOR 3163.

Part numbers include ANCHOR 3163, SKP SKM3163 and DEA / MARMON RIDE CONTROL A5388, among others listed above.

This table covers the Transmission service kits. Read more

2 Transmission Service Kit parts for the 2012 Chrysler 300 come from VAICO.

In the Expert Kit (Basic Kit & Transmission Fluid) grade, VAICO supplies 1 part: grouped under the catalog's "Expert Kit (Basic Kit & Transmission Fluid)" designation — the notes column spells out what sets them apart. A representative part number is VAICO V302254.

The Expert Kit + (Expert Kit and Extra Oil for Rinsing) section lists 1 option from VAICO — grouped under the catalog's "Expert Kit + (Expert Kit and Extra Oil for Rinsing)" designation — the notes column spells out what sets them apart. VAICO V302254XXL is listed in this group.

Part numbers include VAICO V302254 and VAICO V302254XXL.

This table covers the valve bodies that route hydraulic pressure inside the transmission. Read more

MOPAR supplies the 4 Valve Body parts for the 2012 Chrysler 300.

This group includes MOPAR R2108213AC, MOPAR 52108213AB and MOPAR R2108213AB and the remaining parts above.