2013 Chrysler 300 Drivetrain Parts

This table covers the actuators that engage four-wheel drive at the transfer case or axle. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

2 4WD Actuator parts are listed for the 2013 Chrysler 300, from MOPAR and STANDARD MOTOR PRODUCTS. 1 part fits every engine; the other 1 is engine-specific.

Listed part numbers: MOPAR 68052258AA and STANDARD MOTOR PRODUCTS TCA118.

This table covers the Axle / Differential assemblies. Read more

MOPAR supplies the 3 Axle / Differential Assembly parts for the 2013 Chrysler 300.

Part numbers include MOPAR 4593844AA, MOPAR 4593853AA and MOPAR 68085306AA.

This table covers the Axle housings. Read more

This group shows a single part: MOPAR 5143949AA.

This table covers the seals where an axle shaft exits the housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

8 Axle Shaft Seal parts for the 2013 Chrysler 300 come from 4 brands — TIMKEN, WJB / INMOTION PARTS, SCHAEFFLER and 1 other brand. The "Popular" part is TIMKEN SL260185. 3 parts fit every engine; the other 5 are engine-specific.

Part numbers include TIMKEN SL260185, WJB / INMOTION PARTS WS710999 and SCHAEFFLER SS6597, among others listed above.

This table covers the complete CV axle shafts from differential (or hub) to wheel. Typical signs include a click in tight turns, grease flung around the wheel well, or a vibration that builds with speed. A torn boot caught early is a boot kit; caught late it is the whole axle. Torque the axle nut to the method in the notes. Read more

38 CV Axle parts for the 2013 Chrysler 300 come from 8 brands — TRAKMOTIVE, GSP, TOP NOTCH and 5 other brands. The "Popular" part is FAMOUS BRAND NCV479097. Grades run from Economy through Standard Replacement; Standard Replacement is the most populated section, led by TRAKMOTIVE, GSP, TOP NOTCH and 3 other brands.

This table covers the CV Intermediate shafts. Read more

One part is listed for the 2013 Chrysler 300 — DORMAN 630347.

This table covers the boots that keep grease in a CV joint. Typical signs include a split boot, grease flung around the joint, or a click once grit is inside. A boot caught early is a kit. Once the joint has clicked, the joint itself is usually worn. Read more

4 CV Joint Boot parts for the 2013 Chrysler 300 come from 2 brands — MEVOTECH and MOPAR. 3 parts fit every engine; the other 1 is engine-specific.

Listed part numbers: MEVOTECH DX516, MEVOTECH DX571 and MOPAR 5142215AA, plus the other parts above.

This table covers the bearings and races that support the differential carrier. Read more

18 Differential Carrier Bearing / Race parts for the 2013 Chrysler 300 come from 5 brands — BCA, WJB / INMOTION PARTS, SKF and 2 other brands. The "Popular" part is WJB / INMOTION PARTS WTLM503310.

The Economy section lists 4 options from WJB / INMOTION PARTS — the catalog's value-priced group. WJB / INMOTION PARTS WTLM503310 is listed in this group.

In the Standard Replacement grade, BCA, SKF, SCHAEFFLER and 1 other brand supply 11 parts: built to original-equipment specification. A representative part number is BCA NBLM503349A.

3 further parts sit outside the graded sections, with the same engine-level match.

This table covers the Differential Carrier bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

This group shows a single part: ENERGY SUSPENSION 51115G.

This table covers the Differential covers. Read more

One part is listed for the 2013 Chrysler 300 — MOPAR 5143120AA.

This table covers the Differential Cover bolts. Read more

This group shows a single part: MOPAR 5143143AA.

This table covers the Differential mounts. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

MOPAR supplies the 6 Differential Mount parts for the 2013 Chrysler 300.

Listed part numbers: MOPAR 4578191AA, MOPAR 4578084AC and MOPAR 4578085AA, plus the other parts above.

This table covers the bearings and races on the differential pinion. Read more

13 Differential Pinion Bearing / Race parts are listed for the 2013 Chrysler 300, from BCA, WJB / INMOTION PARTS, FAMOUS BRAND and 4 other brands. WJB / INMOTION PARTS WTM86610 carries the "Popular" badge. 3 parts fit every engine; the other 10 are engine-specific.

Economy: 4 parts, from WJB / INMOTION PARTS and FAMOUS BRAND. A representative part number is WJB / INMOTION PARTS WTM86610.

The Standard Replacement section: 9 options from BCA, TIMKEN, SKF and 2 other brands. BCA NBM88010 is listed in this group.

This table covers the flanges that connect the driveshaft to the differential pinion. Read more

2 Differential Pinion Flange parts for the 2013 Chrysler 300 come from DORMAN.

Part numbers include DORMAN 697631 and DORMAN 697630.

This table covers the seals at the differential pinion yoke. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

6 Differential Pinion Seal parts for the 2013 Chrysler 300 come from 4 brands — SKF, WJB / INMOTION PARTS, NATIONAL and 1 other brand. The "Popular" part is NATIONAL 710996. 3 parts fit every engine; the other 3 are engine-specific.

This group includes NATIONAL 710996, SKF 18690A and SKF 23255A and the remaining parts above.

This table covers the Differential Pinion shims. Read more

5 Differential Pinion Shim parts for the 2013 Chrysler 300 come from MOPAR. Every part fits all 3 engine options (3.6L V6, 5.7L V8 and 6.4L V8).

Listed part numbers: MOPAR 5142921AA, MOPAR 5142922AA and MOPAR 5142923AA, plus the other parts above.

This table covers the ring-and-pinion gear sets that set the axle ratio. Read more

This group shows a single part: RICHMOND 4901641.

This table covers the seals at the Differential. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Differential Seal parts are listed for the 2013 Chrysler 300, from ELRING, MOPAR, NATIONAL and 1 other brand. 3 parts fit every engine; the other 1 is engine-specific.

This group includes ELRING B17500, MOPAR 5161591AA and NATIONAL 711050 and the remaining parts above.

This table covers the driveshafts that carry torque from the transmission or transfer case. Read more

17 Drive Shaft parts are listed for the 2013 Chrysler 300, from DORMAN, MOPAR, TOP NOTCH and 5 other brands. SKP SK936400 carries the "Popular" badge. 1 part fits every engine; the other 16 are engine-specific.

This table covers the Drive Shaft Center Support bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

10 Drive Shaft Center Support Bearing parts are listed for the 2013 Chrysler 300, from DORMAN, WJB / INMOTION PARTS, DEA / MARMON RIDE CONTROL and 7 other brands. DORMAN 934301 carries the "Popular" badge. 9 parts fit every engine; the other 1 is engine-specific.

Economy: 4 parts, from DORMAN, WJB / INMOTION PARTS, DEA / MARMON RIDE CONTROL and 1 other brand. A representative part number is DORMAN 934301.

The Standard Replacement section: 6 options from DANA, ANCHOR, BCA and 3 other brands. DANA 252110201X is listed in this group.

This table covers the flex joints in the driveshaft. Read more

7 Drive Shaft Flex Joint parts for the 2013 Chrysler 300 come from 4 brands — DORMAN, AAE, ULTRA-POWER and 1 other brand. 1 part fits every engine; the other 6 are engine-specific.

This group includes AAE FJC0111, AAE FJC0101 and DORMAN 935510 and the remaining parts above.

This table covers the seals at the Drive Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Drive Shaft Seal parts for the 2013 Chrysler 300 come from 2 brands — ELRING and MOPAR.

Part numbers include ELRING B15340, ELRING B15590 and ELRING B17540, among others listed above.

This table covers the gear oils specified for the axle or transfer case. Typical signs include a low-oil lamp, knocking, or oil that has gone thin before the next interval. Match the viscosity and spec in the notes, not just the weight on the bottle. Read more

25 Gear Oil parts for the 2013 Chrysler 300 come from 5 brands — VALVOLINE, LUCAS OIL, MOBIL and 2 other brands. The "Popular" part is MOBIL 102490.

The SAE 75W-140 section lists 9 options from VALVOLINE, LUCAS OIL and MOBIL — grouped under the catalog's "SAE 75W-140" designation — the notes column spells out what sets them apart. MOBIL 102490 is listed in this group.

The SAE 75W-90 section lists 10 options from VALVOLINE, LUCAS OIL, MOBIL and 1 other brand — grouped under the catalog's "SAE 75W-90" designation — the notes column spells out what sets them apart. MOBIL 104361 is listed in this group.

6 further parts sit outside the graded sections, with the same engine-level match.

This table covers the Transfer Case assemblies. Read more

This group shows a single part: MOPAR R2123577AA.

This table covers the fluids specified for the transfer case. Typical signs include discolored fluid, a burnt smell, or a level that keeps dropping. Use only the specification in the notes — the tables group grades because they are not interchangeable. Read more

4 Transfer Case Fluid parts for the 2013 Chrysler 300 come from 3 brands — MOPAR, VAICO and VALVOLINE.

Part numbers include MOPAR 68049954AD, MOPAR 68049954AC and VAICO V600432, among others listed above.

This table covers the Transfer Case Input Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

4 Transfer Case Input Shaft Bearing parts for the 2013 Chrysler 300 come from 4 brands — BCA, SCHAEFFLER, SKF and 1 other brand.

Part numbers include BCA NBLM503310, SCHAEFFLER 6014 and SKF 6014J, among others listed above.

This table covers the wear sleeves used to restore a Transfer Case Input Shaft seal surface. Read more

2 Transfer Case Input Shaft Repair Sleeve parts are listed for the 2013 Chrysler 300, from NATIONAL and WJB / INMOTION PARTS.

This group includes NATIONAL 99274 and WJB / INMOTION PARTS WS99274.

This table covers the Transfer Case Output shafts. Read more

One part is listed for the 2013 Chrysler 300 — MOPAR 68055317AA.