2019 Dodge Attitude Engine Parts

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

This group shows a single part: AJUSA 54249900.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

AJUSA supplies both parts for the 2019 Dodge Attitude.

Part numbers include AJUSA 15094900 and AJUSA 71008700.

This table covers the bolts that clamp the cylinder head to the block. Read more

This group shows a single part: AJUSA 81067200.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: AJUSA 10166400.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

This group shows a single part: AJUSA 52484900.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

This group shows a single part: AJUSA 50436700.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: AJUSA 13241600.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

3 Motor Mount parts are listed for the 2019 Dodge Attitude, from ANCHOR, DEA / MARMON RIDE CONTROL and PIONEER.

Part numbers include ANCHOR 10107, DEA / MARMON RIDE CONTROL A4660 and PIONEER 610107.

This table covers the drain plugs in the oil pan. Read more

6 Oil Drain Plug parts are listed for the 2019 Dodge Attitude, from DORMAN, AGS and SKP. AGS ODP00007 carries the "Popular" badge.

This group includes AGS ODP00007, DORMAN 090053 and AGS ODP00012 and the remaining parts above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Oil Drain Plug Gasket parts for the 2019 Dodge Attitude come from 2 brands — AJUSA and DORMAN.

This group includes AJUSA 18001100 and DORMAN 095141.

This table covers the caps on the oil filler neck. Read more

2 Oil Filler Cap parts are listed for the 2019 Dodge Attitude, from GATES and MOTORAD.

Listed part numbers: GATES 31118 and MOTORAD MO154.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

3 Oil Filter parts are listed for the 2019 Dodge Attitude, from VARIOUS MFR and MOBIL.

In the Economy grade, VARIOUS MFR supplies 1 part: the catalog's value-priced group. A representative part number is VARIOUS MFR PG4612.

In the High Performance / Heavy Duty grade, MOBIL supplies 1 part: grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. A representative part number is MOBIL M1110A.

The Standard Replacement section lists 1 option from VARIOUS MFR — built to original-equipment specification. VARIOUS MFR PG4612EX is listed in this group.

Listed part numbers: VARIOUS MFR PG4612, MOBIL M1110A and VARIOUS MFR PG4612EX.

This table covers the rings that seal each piston to the cylinder wall. Read more

2 Piston Ring parts for the 2019 Dodge Attitude come from HASTINGS MANUFACTURING.

This group includes HASTINGS MANUFACTURING 2N5274 and HASTINGS MANUFACTURING 2N5274S.

This table covers the Timing Cam sprockets. Read more

One part is listed for the 2019 Dodge Attitude — CLOYES S1200.

This table covers the timing chains that keep the cams in time with the crank. Read more

This group shows a single part: CLOYES 94318.

This table covers kits that group a timing chain with the related tensioners and guides. Read more

CLOYES supplies both parts for the 2019 Dodge Attitude.

Part numbers include CLOYES 94318SAX and CLOYES 94318SA.

This table covers the guides and dampers that keep the timing chain on its path. Read more

2 Timing Chain Guide / Damper parts for the 2019 Dodge Attitude come from CLOYES.

This group includes CLOYES 95826 and CLOYES 95827.

This table covers the tensioners that keep the timing chain taut. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

One part is listed for the 2019 Dodge Attitude — CLOYES 96217.

This table covers the Torque Strut mounts. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

3 Torque Strut Mount parts for the 2019 Dodge Attitude come from 3 brands — ANCHOR, DEA / MARMON RIDE CONTROL and PIONEER.

This group includes ANCHOR 10104, DEA / MARMON RIDE CONTROL A4659 and PIONEER 630104.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2019 Dodge Attitude — AJUSA 11131000.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

AJUSA supplies both parts for the 2019 Dodge Attitude.

Part numbers include AJUSA 12022700 and AJUSA 57067300.