This page lists 10 ignition parts for the 2019 Dodge Attitude, across 4 part types, covering the 1.2L L3 engine. Every part shows its brand, manufacturer part number and fitment notes.
On the 2019 Dodge Attitude, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules. Most of the listed parts are Ignition Coil (5 parts), Camshaft Position Sensor (3 parts) and Crankshaft Position Sensor (1 part). The other 1 part type covers the remaining 1 part.
The 2019 Dodge Attitude came with a single engine, the 1.2L L3, and every part is verified against it.
7 brands supply ignition parts for the 2019 Dodge Attitude, led by STANDARD MOTOR PRODUCTS (3 parts), WALKER PRODUCTS (2 parts) and WELLS (1 part), plus 4 more brands. Quality grades include Economy and Standard Replacement.
A "Popular" badge means the source catalog flagged the part as frequently chosen for the 2019 Dodge Attitude. 1 part has it: SPECTRA PREMIUM C926 (Ignition Coil). Each part number opens a page with every vehicle that part fits.
Camshaft Position Sensor
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS | PC1247 | 🇲🇽 MX | View on Amazon | |
| WALKER PRODUCTS | 2352019 | 🇲🇽 MX | Sensor Only | View on Amazon |
| WELLS | 5S15132 | 🇲🇽 MX | View on Amazon |
This table covers the sensors that report camshaft position to the ECU. Typical signs include a stall, a no-start, or a code for cam or crank correlation. Check the connector and the reluctor gap before replacing the sensor.
3 Camshaft Position Sensor parts for the 2019 Dodge Attitude come from 3 brands — STANDARD MOTOR PRODUCTS, WALKER PRODUCTS and WELLS.
Listed part numbers: STANDARD MOTOR PRODUCTS PC1247, WALKER PRODUCTS 2352019 and WELLS 5S15132.
Crankshaft Position Sensor
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS | PC814 | 🇲🇽 MX | View on Amazon |
This table covers the sensors that report crankshaft position and engine speed. Typical signs include a stall, a no-start, or a code for cam or crank correlation. Check the connector and the reluctor gap before replacing the sensor.
This group shows a single part: STANDARD MOTOR PRODUCTS PC814.
Ignition Coil
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SPECTRA PREMIUM Popular | C926 | 🇲🇽 MX | Ignition Coil Mounts to Cylinder Head | View on Amazon |
| B&B | BB2815 | 🇲🇽 MX | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS | UF815 | 🇲🇽 MX | View on Amazon | |
| WALKER PRODUCTS | 9212545 | 🇲🇽 MX | Single Coil | View on Amazon |
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| HOLSTEIN | 2IGC0585 | 🇲🇽 MX | View on Amazon |
This table covers the coils that fire each spark plug. Typical signs include a misfire that follows one cylinder, a snap in damp weather, or a coil that is swollen or cracked. Swap a suspect coil with a neighbor to confirm, then replace boots that tore on the way off.
5 Ignition Coil parts for the 2019 Dodge Attitude come from 5 brands — SPECTRA PREMIUM, B&B, STANDARD MOTOR PRODUCTS and 2 other brands. The "Popular" part is SPECTRA PREMIUM C926.
The Economy section lists 2 options from SPECTRA PREMIUM and B&B — the catalog's value-priced group. SPECTRA PREMIUM C926 is listed in this group.
In the Standard Replacement grade, STANDARD MOTOR PRODUCTS and WALKER PRODUCTS supply 2 parts: built to original-equipment specification. A representative part number is STANDARD MOTOR PRODUCTS UF815.
1 further part sits outside the graded sections, with the same engine-level match.
This group includes SPECTRA PREMIUM C926, B&B BB2815 and STANDARD MOTOR PRODUCTS UF815 and the remaining parts above.
Spark Plug
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ACDELCO | 21 | 🇺🇸 US 🇨🇦 CA | ProfessionalRapidfire | View on Amazon |
This table covers the spark plugs for this engine. Typical signs include misfire under load, rough idle, or a flashing check-engine light. Verify the gap even on pre-gapped plugs, and replace coil boots that come off a high-mileage engine.
One part is listed for the 2019 Dodge Attitude — ACDELCO 21.
Buying Ignition Parts for a 2019 Dodge Attitude
On this vehicle, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules.
- Confirm you have the 1.2L L3 engine — every part on this page is matched to it.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Ignition Coil and Camshaft Position Sensor .
Frequently Asked Questions
How many ignition parts fit the 2019 Dodge Attitude?
Our catalog currently lists 10 ignition parts for the 2019 Dodge Attitude across 4 subcategories and 7 brands, covering the 1.2L L3 engine. Each part is matched to the engine(s) it fits.
What are the signs of ignition problems on a 2019 Dodge Attitude?
Common symptoms include misfires under load, rough idle, flashing check-engine light, or poor starting in damp weather. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What spark-plug gap is listed for the 2019 Dodge Attitude?
Notes on this page include pre-set gaps of 0.044" and 0.045". Still verify against spec — even “pre-gapped” plugs should be checked before they go in.
What should I replace at the same time?
Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2019 Dodge Attitude was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2019 Dodge Attitude?
Every part on this page is matched to the 1.2L L3 engine. Then gap matters even on “pre-gapped” plugs — verify against spec, and replace coil boots when they come off a high-mileage engine. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2019 Dodge Attitude
Ignition Parts for Other Dodge Attitude Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.