2019 Dodge Journey Engine Parts

This table covers the chains that drive the balance shafts. Read more

This group shows a single part: MOPAR 4884870AB.

This table covers the guides that keep the balance-shaft chain on its path. Read more

2 Balance Shaft Chain Guide parts for the 2019 Dodge Journey come from 2 brands — MOPAR and PREFERRED COMPONENTS INC.

Listed part numbers: MOPAR 4884589AA and PREFERRED COMPONENTS INC R76139.

This table covers the Balance Shaft Chain tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

One part is listed for the 2019 Dodge Journey — PREFERRED COMPONENTS INC T66222.

This table covers the camshafts that open the valves. Read more

13 Camshaft parts for the 2019 Dodge Journey come from 3 brands — MOPAR, MELLING and SKP. The "Popular" part is MOPAR 5184378AH. 1 part fits every engine; the other 12 are engine-specific.

This table covers the Camshaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

This group shows a single part: MOPAR 1016A031.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 2019 Dodge Journey — APEX ATC11030.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

9 Connecting Rod Bearing parts for the 2019 Dodge Journey come from 5 brands — MAHLE / CLEVITE, ENGINETECH, SEALED POWER and 2 other brands. The "Popular" part is ENGINETECH BB175J.

Listed part numbers: ENGINETECH BB175J, ENGINETECH BB167J and KING ENGINE BEARINGS CR6857SM, plus the other parts above.

This table covers the Connecting Rod bolts. Read more

MOPAR supplies both parts for the 2019 Dodge Journey.

Listed part numbers: MOPAR MN195112 and MOPAR 6509128AA.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

15 Conversion / Lower Gasket Set parts for the 2019 Dodge Journey come from 8 brands — APEX, ENGINETECH, FEL-PRO and 5 other brands. The "Popular" part is APEX ACS2086.

This table covers the crankshafts that turn piston motion into rotation. Read more

2 Crankshaft parts for the 2019 Dodge Journey come from MOPAR.

This group includes MOPAR 4884563AC and MOPAR 5184251AI.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

14 Crankshaft Main Bearing parts are listed for the 2019 Dodge Journey, from MOPAR, ENGINETECH, TOPLINE and 2 other brands. ENGINETECH BC152J carries the "Popular" badge.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

7 Crankshaft Repair Sleeve parts are listed for the 2019 Dodge Journey, from WJB / INMOTION PARTS, BCA and NATIONAL.

Part numbers include BCA NS99166, BCA NS99177 and NATIONAL 99166, among others listed above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

36 Crankshaft Seal parts are listed for the 2019 Dodge Journey, from FEL-PRO, NATIONAL, AJUSA and 11 other brands. APEX ABS275 carries the "Popular" badge. The notes list position, dimensions and spec qualifiers wherever the manufacturer distinguishes between variants.

This table covers the cylinder heads that close the top of the block. Read more

MOPAR supplies the 3 Cylinder Head parts for the 2019 Dodge Journey.

Part numbers include MOPAR R3620112AA, MOPAR R3602014AA and MOPAR 68141352AE.

This table covers the Cylinder Head Alignment Dowel pins. Read more

This group shows a single part: MOPAR 6100997.

This table covers the bolts that clamp the cylinder head to the block. Read more

13 Cylinder Head Bolt parts for the 2019 Dodge Journey come from 9 brands — FEL-PRO, MAHLE / CLEVITE, AJUSA and 6 other brands. The "Popular" part is FEL-PRO ES72267.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

29 Cylinder Head Gasket parts for the 2019 Dodge Journey come from 11 brands — AJUSA, VICTOR REINZ, APEX and 8 other brands. The "Popular" part is APEX AHG286. A list this long means Cylinder Head Gasket applications vary by configuration — the notes carry the qualifiers.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

18 Cylinder Head Gasket Set parts for the 2019 Dodge Journey come from 9 brands — FEL-PRO, ENGINETECH, APEX and 6 other brands. The "Popular" part is APEX AHS2086.

This table covers the Cylinder Head plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

MOPAR supplies both parts for the 2019 Dodge Journey.

Part numbers include MOPAR 4884892AA and MOPAR 4556020AB.

This table covers the Cylinder Head Spacer shims. Read more

2 Cylinder Head Spacer Shim parts for the 2019 Dodge Journey come from SBI.

Part numbers include SBI 2302200L and SBI 2302200R.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

6 Engine Block Heater parts are listed for the 2019 Dodge Journey, from KAT'S HEATERS and MOPAR.

Part numbers include KAT'S HEATERS 11812, KAT'S HEATERS 28812 and KAT'S HEATERS 28814, among others listed above.

This table covers the Engine covers. Read more

9 Engine Cover parts for the 2019 Dodge Journey come from 3 brands — MOPAR, VARIOUS MFR and TECHPRO. The "Popular" part is MOPAR 68087244AA. Every part fits both the 2.4L L4 and the 3.6L V6.

Part numbers include MOPAR 68087244AA, MOPAR 68068301AB and MOPAR 5116282AB, among others listed above.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

5 Engine Kit Gasket Set parts for the 2019 Dodge Journey come from 4 brands — AJUSA, ENGINETECH, MOPAR and 1 other brand.

Part numbers include AJUSA 50388500, AJUSA 50367600 and ENGINETECH CR122K6, among others listed above.

This table covers the brackets that mount the Engine Lift. Typical signs include a cracked mount, a rattle, or a bracket that no longer holds alignment. Confirm position in the notes. Many brackets look alike and bolt to different corners. Read more

This group shows a single part: MOPAR 4884752AC.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

11 Exhaust Valve parts are listed for the 2019 Dodge Journey, from MELLING, QUALCAST, ENGINETECH and 3 other brands. MELLING V3191 carries the "Popular" badge.

This table covers the Expansion plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

3 Expansion Plug parts for the 2019 Dodge Journey come from MOPAR. 1 part fits every engine; the other 2 are engine-specific.

Listed part numbers: MOPAR 6036760AA, MOPAR 68060349AA and MOPAR 6510082AA.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

12 Harmonic Balancer parts for the 2019 Dodge Journey come from 7 brands — SKP, ATP, DORMAN and 4 other brands. The "Popular" part is SKP SK594341.

The Economy section lists 2 options from SKP — the catalog's value-priced group. SKP SK594341 is listed in this group.

In the Standard Replacement grade, ATP, DORMAN, DAYCO and 3 other brands supply 10 parts: built to original-equipment specification. A representative part number is ATP 102343.

This table covers the Intake manifolds. Typical signs include an exhaust tick, a vacuum leak, or a gasket that has burned through. Replace the gaskets and hardware; a warped flange will leak with a new gasket alone. Read more

10 Intake Manifold parts are listed for the 2019 Dodge Journey, from DORMAN, MOPAR, AUTOTECNICA and 3 other brands. AUTOTECNICA CY1418959 carries the "Popular" badge.

This table covers the Intake Manifold bolts. Read more

This group shows a single part: DORMAN 32128.