2020 Dodge Journey Engine Parts

This table covers the chains that drive the balance shafts. Read more

This group shows a single part: MOPAR 4884870AB.

This table covers the guides that keep the balance-shaft chain on its path. Read more

2 Balance Shaft Chain Guide parts for the 2020 Dodge Journey come from 2 brands — MOPAR and PREFERRED COMPONENTS INC.

Part numbers include MOPAR 4884589AA and PREFERRED COMPONENTS INC R76139.

This table covers the Balance Shaft Chain tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

One part is listed for the 2020 Dodge Journey — PREFERRED COMPONENTS INC T66222.

This table covers the camshafts that open the valves. Read more

4 Camshaft parts for the 2020 Dodge Journey come from 2 brands — MOPAR and SKP.

This group includes MOPAR 4884736AC, MOPAR 4884735AC and SKP SKES0356 and the remaining parts above.

This table covers the Camshaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

This group shows a single part: MOPAR 1016A031.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 2020 Dodge Journey — APEX ATC11030.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

4 Connecting Rod Bearing parts for the 2020 Dodge Journey come from 3 brands — MAHLE / CLEVITE, ENGINETECH and TOPLINE.

Part numbers include ENGINETECH BB167J, MAHLE / CLEVITE CB1909A and MAHLE / CLEVITE CB1909A4, among others listed above.

This table covers the Connecting Rod bolts. Read more

One part is listed for the 2020 Dodge Journey — MOPAR MN195112.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

8 Conversion / Lower Gasket Set parts for the 2020 Dodge Journey come from 8 brands — APEX, ENGINETECH, AJUSA and 5 other brands. The "Popular" part is APEX ACS2086.

This group includes APEX ACS2086, ENGINETECH CR122CSB and AJUSA 54211000 and the remaining parts above.

This table covers the crankshafts that turn piston motion into rotation. Read more

This group shows a single part: MOPAR 4884563AC.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

6 Crankshaft Main Bearing parts are listed for the 2020 Dodge Journey, from MOPAR, TOPLINE, ENGINETECH and 1 other brand. ENGINETECH BC152J carries the "Popular" badge.

Part numbers include ENGINETECH BC152J, MAHLE / CLEVITE MS2299A and MOPAR 4884915AA, among others listed above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

14 Crankshaft Seal parts are listed for the 2020 Dodge Journey, from FEL-PRO, VICTOR REINZ, APEX and 4 other brands. APEX ABS275 carries the "Popular" badge.

This table covers the bolts that clamp the cylinder head to the block. Read more

6 Cylinder Head Bolt parts for the 2020 Dodge Journey come from 6 brands — FEL-PRO, MAHLE / CLEVITE, AJUSA and 3 other brands. The "Popular" part is FEL-PRO ES72267.

Part numbers include FEL-PRO ES72267, MAHLE / CLEVITE GS33547 and AJUSA 81041900, among others listed above.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

7 Cylinder Head Gasket parts for the 2020 Dodge Journey come from 7 brands — APEX, FEL-PRO, AJUSA and 4 other brands. The "Popular" part is APEX AHG286.

Listed part numbers: APEX AHG286, FEL-PRO 26557PT and AJUSA 10177100, plus the other parts above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

7 Cylinder Head Gasket Set parts for the 2020 Dodge Journey come from 6 brands — FEL-PRO, AJUSA, ENGINETECH and 3 other brands. The "Popular" part is FEL-PRO HS26332PT.

Part numbers include FEL-PRO HS26332PT, AJUSA 52425300 and ENGINETECH CR144HSA, among others listed above.

This table covers the Cylinder Head plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

MOPAR supplies both parts for the 2020 Dodge Journey.

Listed part numbers: MOPAR 4884892AA and MOPAR 4884893AA.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

3 Engine Block Heater parts are listed for the 2020 Dodge Journey, from KAT'S HEATERS and MOPAR.

This group includes KAT'S HEATERS 11812, KAT'S HEATERS 28812 and MOPAR 5033557AB.

This table covers the Engine covers. Read more

9 Engine Cover parts for the 2020 Dodge Journey come from 3 brands — MOPAR, VARIOUS MFR and TECHPRO. The "Popular" part is MOPAR 68087244AA.

Part numbers include MOPAR 68087244AA, MOPAR 68068301AB and MOPAR 5116282AB, among others listed above.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

3 Engine Kit Gasket Set parts for the 2020 Dodge Journey come from 3 brands — AJUSA, ENGINETECH and TOPLINE.

Listed part numbers: AJUSA 50388500, ENGINETECH CR122K6 and TOPLINE CGSCHR2.

This table covers the brackets that mount the Engine Lift. Typical signs include a cracked mount, a rattle, or a bracket that no longer holds alignment. Confirm position in the notes. Many brackets look alike and bolt to different corners. Read more

This group shows a single part: MOPAR 4884752AC.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

6 Exhaust Valve parts are listed for the 2020 Dodge Journey, from MELLING, QUALCAST, ENGINETECH and 3 other brands. MELLING V3191 carries the "Popular" badge.

Part numbers include MELLING V3191, QUALCAST 1013191 and ENGINETECH V4449, among others listed above.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

6 Harmonic Balancer parts for the 2020 Dodge Journey come from 6 brands — SKP, DORMAN, ATP and 3 other brands. The "Popular" part is SKP SK594341.

The Economy section lists 1 option from SKP — the catalog's value-priced group. SKP SK594341 is listed in this group.

In the Standard Replacement grade, DORMAN, ATP, DAYCO and 2 other brands supply 5 parts: built to original-equipment specification. A representative part number is DORMAN 594341.

Listed part numbers: SKP SK594341, DORMAN 594341 and ATP 102326, plus the other parts above.

This table covers the Intake manifolds. Typical signs include an exhaust tick, a vacuum leak, or a gasket that has burned through. Replace the gaskets and hardware; a warped flange will leak with a new gasket alone. Read more

One part is listed for the 2020 Dodge Journey — MOPAR 4593915AA.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Intake Manifold Gasket parts for the 2020 Dodge Journey come from 5 brands — VICTOR REINZ, APEX, FEL-PRO and 2 other brands. The "Popular" part is APEX AMS2850.

This group includes APEX AMS2850, FEL-PRO MS96840 and MAHLE / CLEVITE MS19561 and the remaining parts above.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

6 Intake Valve parts are listed for the 2020 Dodge Journey, from ENGINETECH, MELLING, MOPAR and 3 other brands. ENGINETECH V4448 carries the "Popular" badge.

Part numbers include ENGINETECH V4448, MELLING V3190 and MOPAR 5047068AA, among others listed above.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

5 Motor Mount parts are listed for the 2020 Dodge Journey, from VAICO, ANCHOR, DEA / MARMON RIDE CONTROL and 2 other brands. ANCHOR 3335 carries the "Popular" badge.

Economy: 1 part, from VAICO. A representative part number is VAICO V330805.

The Standard Replacement section: 4 options from ANCHOR, DEA / MARMON RIDE CONTROL, PIONEER and 1 other brand. ANCHOR 3335 is listed in this group.

Part numbers include ANCHOR 3335, VAICO V330805 and DEA / MARMON RIDE CONTROL A5686, among others listed above.

This table covers the brackets that mount the Motor Mount. Typical signs include a cracked mount, a rattle, or a bracket that no longer holds alignment. Confirm position in the notes. Many brackets look alike and bolt to different corners. Read more

MOPAR supplies the 4 Motor Mount Bracket parts for the 2020 Dodge Journey.

Listed part numbers: MOPAR 5147207AC, MOPAR 5171058AE and MOPAR 68084049AA, plus the other parts above.

This table covers the Motor Mount kits. Read more

One part is listed for the 2020 Dodge Journey — ANCHOR 300864.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

33 Oil parts are listed for the 2020 Dodge Journey, from VALVOLINE, MOBIL, IDEMITSU and 1 other brand. LIQUI MOLY 2259 carries the "Popular" badge. Grades run from Full Synthetic through Synthetic Blend; Full Synthetic is the most populated section, led by VALVOLINE, MOBIL, IDEMITSU and 1 other brand.

This table covers the heat exchangers that cool engine oil. Typical signs include oil at the cooler fittings, or coolant that looks like a milkshake. Pressure-test both circuits after a cooler swap — a leak here mixes oil and coolant. Read more

5 Oil Cooler parts are listed for the 2020 Dodge Journey, from DORMAN, AUTOTECNICA, GPD and 2 other brands. DORMAN 918968 carries the "Popular" badge.

This group includes DORMAN 918968, AUTOTECNICA CY1423683 and GPD 2611425 and the remaining parts above.

This table covers the Oil Cooler Hose pipes. Read more

One part is listed for the 2020 Dodge Journey — MOPAR 52014770AB.

This table covers the seals at the Oil Cooler. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Oil Cooler Seal parts for the 2020 Dodge Journey come from 4 brands — FEL-PRO, MAHLE / CLEVITE, MOPAR and 1 other brand.

Listed part numbers: FEL-PRO 71830, MAHLE / CLEVITE B33281 and MOPAR 68027698AA, plus the other parts above.

This table covers the Oil Dipstick tubes. Read more

MOPAR supplies both parts for the 2020 Dodge Journey.

Part numbers include MOPAR 4884733AC and MOPAR 4884688AD.

This table covers the drain plugs in the oil pan. Read more

6 Oil Drain Plug parts are listed for the 2020 Dodge Journey, from AGS, DORMAN, MOPAR and 1 other brand. AGS ODP00007 carries the "Popular" badge.

Part numbers include AGS ODP00007, DORMAN 090053 and AGS ODP00012, among others listed above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: FEL-PRO 72907.

This table covers the caps on the oil filler neck. Read more

6 Oil Filler Cap parts are listed for the 2020 Dodge Journey, from DORMAN, GATES, CALORSTAT and 3 other brands. DORMAN 80990 carries the "Popular" badge.

Listed part numbers: DORMAN 80990, GATES 31118 and CALORSTAT OC2333, plus the other parts above.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

20 Oil Filter parts are listed for the 2020 Dodge Journey, from ACDELCO, VARIOUS MFR, WIX and 11 other brands. WIX 57060XP carries the "Popular" badge.

Economy: 6 parts, from CHAMP / LUBER-FINER, FRAM, FVP and 3 other brands. A representative part number is CHAMP / LUBER-FINER PH48.

In the High Performance / Heavy Duty grade, WIX and MOBIL supply 2 parts: grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. A representative part number is WIX 57060XP.

The Standard Replacement section: 12 options from ACDELCO, MOPAR, BOSCH and 5 other brands. ACDELCO PF48 is listed in this group.

This table covers the Oil Filter adapters. Read more

This group shows a single part: MOPAR 5047079AA.

This table covers the Oil Filter Adapter Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

2 Oil Filter Adapter Gasket / O-Ring parts for the 2020 Dodge Journey come from 2 brands — MAHLE / CLEVITE and MOPAR.

Listed part numbers: MAHLE / CLEVITE B33449 and MOPAR 5047084AB.

This table covers the Oil Level Sensor Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

One part is listed for the 2020 Dodge Journey — MOPAR 5047077AA.

This table covers the oil pans that hold the engine's oil sump. Read more

5 Oil Pan parts for the 2020 Dodge Journey come from 5 brands — SKP, DORMAN, MOPAR and 2 other brands. The "Popular" part is SKP SK264361.

Listed part numbers: SKP SK264361, DORMAN 264361 and MOPAR 4884665AE, plus the other parts above.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Oil Pan Gasket parts are listed for the 2020 Dodge Journey, from VICTOR REINZ, APEX, FEL-PRO and 1 other brand. VICTOR REINZ 703141410 carries the "Popular" badge.

Part numbers include VICTOR REINZ 703141410, APEX AOP285 and FEL-PRO OS30782, among others listed above.

This table covers the chains that drive the oil pump. Read more

6 Oil Pump Chain parts for the 2020 Dodge Journey come from 4 brands — PREFERRED COMPONENTS INC, MELLING, S.A. GEAR and 1 other brand. The "Popular" part is MELLING 1046.

The Economy section: 1 option from PREFERRED COMPONENTS INC. PREFERRED COMPONENTS INC C772 is listed in this group.

The Kit section lists 2 options from PREFERRED COMPONENTS INC — grouped under the catalog's "Kit" designation — the notes column spells out what sets them apart. PREFERRED COMPONENTS INC TS21172 is listed in this group.

Standard Replacement: 3 parts, from MELLING, S.A. GEAR and CLOYES. A representative part number is MELLING 1046.

This group includes MELLING 1046, PREFERRED COMPONENTS INC C772 and PREFERRED COMPONENTS INC TS21172 and the remaining parts above.

This table covers the Oil Pump Chain guides. Read more

4 Oil Pump Chain Guide parts for the 2020 Dodge Journey come from 4 brands — CLOYES, MELLING, PREFERRED COMPONENTS INC and 1 other brand.

This group includes CLOYES 95685, MELLING BG7018 and PREFERRED COMPONENTS INC R76082 and the remaining parts above.

This table covers the Oil Pump Chain tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

3 Oil Pump Chain Tensioner parts are listed for the 2020 Dodge Journey, from CLOYES, MELLING and S.A. GEAR.

Listed part numbers: CLOYES 95563, MELLING BT5563 and S.A. GEAR 91075.

This table covers the seals at the Oil Pump. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: MOPAR 4659945.

This table covers the Oil Temperature senders. Read more

3 Oil Temperature Sender parts for the 2020 Dodge Journey come from 3 brands — HOLSTEIN, MOPAR and STANDARD MOTOR PRODUCTS.

The Economy section: 1 option from HOLSTEIN. HOLSTEIN 2CTS0061 is listed in this group.

Standard Replacement: 2 parts, from MOPAR and STANDARD MOTOR PRODUCTS. A representative part number is MOPAR 5033314AA.

This group includes HOLSTEIN 2CTS0061, MOPAR 5033314AA and STANDARD MOTOR PRODUCTS TX194.

This table covers the pistons that travel in each cylinder. Typical signs include knock, blow-by, or a cylinder that will not hold compression. Piston work is a short-block job. Match bore, pin and ring pack in the notes — not the photo. Read more

6 Piston parts for the 2020 Dodge Journey come from 4 brands — ENGINETECH, MOPAR, MAHLE / CLEVITE and 1 other brand. The "Popular" part is ENGINETECH P5082.

In the Premium grade, ENGINETECH and MAHLE / CLEVITE supply 3 parts: a step above OE specification in materials, tolerances or warranty terms. A representative part number is ENGINETECH P5082.

Standard Replacement: 3 parts, from MOPAR and TOPLINE. A representative part number is MOPAR 5191341AA.

Listed part numbers: ENGINETECH P5082, MAHLE / CLEVITE 2244006 and ENGINETECH K50824P, plus the other parts above.

This table covers the rings that seal each piston to the cylinder wall. Read more

6 Piston Ring parts for the 2020 Dodge Journey come from 3 brands — ENGINETECH, HASTINGS MANUFACTURING and TOPLINE. The "Popular" part is ENGINETECH S88124.

Premium: 3 parts, from ENGINETECH. A representative part number is ENGINETECH S88124.

Standard Replacement: 3 parts, from HASTINGS MANUFACTURING and TOPLINE. A representative part number is HASTINGS MANUFACTURING 2C5297S.

This group includes ENGINETECH S88124, ENGINETECH S88124100 and ENGINETECH S8812475 and the remaining parts above.

This table covers the guide rails a timing tensioner works against. Read more

This group shows a single part: CLOYES 95684.

This table covers the Thrust washers. Read more

2 Thrust Washer parts are listed for the 2020 Dodge Journey, from ENGINETECH and MAHLE / CLEVITE.

This group includes ENGINETECH TW1041 and MAHLE / CLEVITE TW694S.

This table covers the timing chains that keep the cams in time with the crank. Read more

5 Timing Chain parts for the 2020 Dodge Journey come from 5 brands — S.A. GEAR, CLOYES, MELLING and 2 other brands. The "Popular" part is S.A. GEAR C1024.

This group includes S.A. GEAR C1024, CLOYES C736F and MELLING 1054 and the remaining parts above.