2020 Dodge Charger Automatic Transmission Parts

This table covers the Automatic Transmission assemblies. Read more

One part is listed for the 2020 Dodge Charger — MOPAR R2120027AF.

This table covers the control units that command automatic-transmission shifts. Read more

2 Automatic Transmission Control Unit (TCU) parts are listed for the 2020 Dodge Charger, from MOPAR and VEMO.

Listed part numbers: MOPAR 68347574AA and VEMO V33860001.

This table covers the Bushing kits. Read more

2 Bushing Kit parts for the 2020 Dodge Charger come from 2 brands — DURA-BOND and PA CARGO. 1 part fits every engine; the other 1 is engine-specific.

Part numbers include DURA-BOND TK33 and PA CARGO K181901.

This table covers the transmission or transfer-case housings. Read more

2 Case parts for the 2020 Dodge Charger come from MOPAR.

This group includes MOPAR 52108099AB and MOPAR 52108484AB.

This table covers the vents on a transmission or axle housing. Read more

MOPAR supplies both parts for the 2020 Dodge Charger. All of them fit every engine offered in the 2020 Charger.

Listed part numbers: MOPAR 68084188AB and MOPAR 5143951AA.

This table covers the Clutch plates. Typical signs include warpage, cracks, or a plate that no longer locates the assembly. Confirm which plate the notes describe — backing plates, clutch plates and strike plates are different parts. Read more

PA CARGO supplies the 8 Clutch Plate parts for the 2020 Dodge Charger. PA CARGO 181114 carries the "Popular" badge. All of them fit every engine offered in the 2020 Charger.

Listed part numbers: PA CARGO 181114, PA CARGO 181102 and PA CARGO 181112, plus the other parts above.

This table covers the clutch-plate packs inside the transmission or transfer case. Read more

11 Clutch Plate Pack parts for the 2020 Dodge Charger come from RAYBESTOS POWERTRAIN. The "Popular" part is RAYBESTOS POWERTRAIN RGPZ018.

In the Friction Plate Pack grade, RAYBESTOS POWERTRAIN supplies 6 parts: grouped under the catalog's "Friction Plate Pack" designation — the notes column spells out what sets them apart. A representative part number is RAYBESTOS POWERTRAIN RGPZ018.

The Steel Plate Pack section lists 5 options from RAYBESTOS POWERTRAIN — grouped under the catalog's "Steel Plate Pack" designation — the notes column spells out what sets them apart. RAYBESTOS POWERTRAIN STMCHRY05 is listed in this group.

This table covers the Conductor plates. Typical signs include warpage, cracks, or a plate that no longer locates the assembly. Confirm which plate the notes describe — backing plates, clutch plates and strike plates are different parts. Read more

One part is listed for the 2020 Dodge Charger — VEMO V30860001.

This table covers the Dipstick / Fluid Filler tubes. Read more

3 Dipstick / Fluid Filler Tube parts for the 2020 Dodge Charger come from 2 brands — MOPAR and DORMAN.

This group includes DORMAN 917327, MOPAR 4627311AC and MOPAR 4591880AG.

This table covers the seals at the Extension Housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 2020 Dodge Charger — SKF 16521.

This table covers the replacement filters for this application — the table heading and notes say which circuit. Typical signs include restricted flow — long cranking, weak airflow, or dirty fluid after a short interval. Seat the new filter so it cannot bypass, and use the grade the notes call for. Read more

14 Filter parts for the 2020 Dodge Charger come from 8 brands — MOPAR, VAICO, ELRING and 5 other brands. The "Popular" part is ELRING 482400. 2 parts fit every engine; the other 12 are engine-specific.

In the Basic Kit (Without Transmission Fluid) grade, VAICO supplies 1 part: grouped under the catalog's "Basic Kit (Without Transmission Fluid)" designation — the notes column spells out what sets them apart. A representative part number is VAICO V302254BEK.

The Economy section lists 5 options from ELRING, DORMAN and VARIOUS MFR — the catalog's value-priced group. ELRING 482400 is listed in this group.

In the Standard Replacement grade, MOPAR, ATP, RAYBESTOS POWERTRAIN and 1 other brand supply 7 parts: built to original-equipment specification. A representative part number is ATP B217.

1 further part sits outside the graded sections, with the same engine-level match.

This table covers the Flexplate Mounting bolts. Read more

One part is listed for the 2020 Dodge Charger — DORMAN 14131.

This table covers the heat exchangers that cool transmission fluid. Typical signs include fluid that overheats, a leak at the cooler fittings, or milky fluid that says coolant and ATF have mixed. Flush the lines when you replace a cooler. Cross-contamination is how a small leak becomes a transmission job. Read more

This group shows a single part: MOPAR 68272789AA.

This table covers the Fluid Cooler Line hoses. Typical signs include swelling, cracks, a soft spot, or a leak at a clamp. Replace adjacent aged hoses while the system is drained — they share the same heat cycle. Read more

9 Fluid Cooler Line / Hose parts for the 2020 Dodge Charger come from 5 brands — MOPAR, DORMAN, SUNSONG and 2 other brands. The "Popular" part is DORMAN 624441. 1 part fits every engine; the other 8 are engine-specific.

Part numbers include DORMAN 624441, DORMAN 624196 and MOPAR 68252508AE, among others listed above.

This table covers the harness connectors at the Fluid Cooler Line / Hose. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2020 Dodge Charger — DORMAN 800723.

This table covers the pans that hold automatic-transmission fluid. Read more

16 Fluid Pan parts are listed for the 2020 Dodge Charger, from MOPAR, DORMAN, SKP and 5 other brands. DORMAN 265850 carries the "Popular" badge. 1 part fits every engine; the other 15 are engine-specific.

This table covers the Fluid Pan bolts. Read more

2 Fluid Pan Bolt parts for the 2020 Dodge Charger come from 2 brands — MOPAR and REIN.

Part numbers include MOPAR 68233701AC and REIN HWB1068.

This table covers the gaskets that seal the Fluid Pan. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

9 Fluid Pan Gasket parts for the 2020 Dodge Charger come from 4 brands — MOPAR, ELRING, FEL-PRO and 1 other brand. The "Popular" part is ELRING 295540. 3 parts fit every engine; the other 6 are engine-specific.

Listed part numbers: ELRING 295540, FEL-PRO TOS18764 and FEL-PRO TOS18773, plus the other parts above.

This table covers the Fluid Pan magnets. Read more

One part is listed for the 2020 Dodge Charger — MOPAR 68207788AA.

This table covers the Fluid pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit. Read more

3 Fluid Pump parts for the 2020 Dodge Charger come from MOPAR.

This group includes MOPAR 68517522AA, MOPAR RL087860AA and MOPAR R8087860AA.

This table covers the Fluid Pump O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

This group shows a single part: MOPAR 52107900AA.

This table covers the seals at the Fluid Pump. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Fluid Pump Seal parts are listed for the 2020 Dodge Charger, from MOPAR and PA CARGO. 1 part fits every engine; the other 2 are engine-specific.

This group includes MOPAR 68144277AA, MOPAR 68261369AA and PA CARGO 181151.

This table covers the gasket kits for this job. Typical signs include the leaks that sent this assembly to the bench. Confirm the kit matches the opening you are sealing; unused leftover pieces often belong to another configuration. Read more

One part is listed for the 2020 Dodge Charger — VICTOR REINZ 711917000.

This table covers the O-rings and seals at this joint. Read more

One part is listed for the 2020 Dodge Charger — ELRING 428390.

This table covers the Output shafts. Read more

One part is listed for the 2020 Dodge Charger — MOPAR 52120024AA.

This table covers the Piston kits. Read more

PA CARGO supplies the 3 Piston Kit parts for the 2020 Dodge Charger. All of them fit every engine offered in the 2020 Charger.

This group includes PA CARGO 92912, PA CARGO 61837A and PA CARGO K18190099.

This table covers the Pressure Control (EPC) solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

This group shows a single part: WELLS 2N1281.

This table covers the rebuild kits for this assembly. Read more

6 Rebuild Kit parts are listed for the 2020 Dodge Charger, from PA CARGO, VEMO and TRANSTEC. PA CARGO K181900 carries the "Popular" badge. 3 parts fit every engine; the other 3 are engine-specific.

In the Banner Kit (Overhaul Kit + Friction Clutch Plates) grade, PA CARGO supplies 1 part: grouped under the catalog's "Banner Kit (Overhaul Kit + Friction Clutch Plates)" designation — the notes column spells out what sets them apart. A representative part number is PA CARGO DK18100S.

The Master Kit (Overhaul Kit + Friction & Steel Clutch Plates) section lists 1 option from PA CARGO — grouped under the catalog's "Master Kit (Overhaul Kit + Friction & Steel Clutch Plates)" designation — the notes column spells out what sets them apart. PA CARGO DK18100 is listed in this group.

In the Overhaul Kit (Gaskets, Seals, O-Rings & Sealing Rings) grade, PA CARGO and TRANSTEC supply 2 parts: grouped under the catalog's "Overhaul Kit (Gaskets, Seals, O-Rings & Sealing Rings)" designation — the notes column spells out what sets them apart. A representative part number is PA CARGO K181900.

2 ungrouped parts are not assigned to a grade, with the same engine-level match.

Part numbers include PA CARGO K181900, PA CARGO DK18100S and PA CARGO DK18100, among others listed above.

This table covers the Shift cables. Typical signs include a stretched or frayed cable, or a control that no longer reaches the end of its travel. Route the new cable through the same clips. A kinked cable binds and fails early. Read more

One part is listed for the 2020 Dodge Charger — MOPAR 68110832AC.

This table covers the Shift Improvement kits. Read more

This group shows a single part: TRANSGO SK7226A.

This table covers the Shift solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

4 Shift Solenoid parts are listed for the 2020 Dodge Charger, from MOPAR and WELLS.

Listed part numbers: MOPAR 52108314AB, MOPAR 5138838AA and MOPAR 5189057AB, plus the other parts above.

This table covers the Sun gears. Read more

One part is listed for the 2020 Dodge Charger — MOPAR 52108078AA.

This table covers the Sun Gear bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

DURA-BOND supplies the 3 Sun Gear Bushing parts for the 2020 Dodge Charger.

Part numbers include DURA-BOND ZFT21BR, DURA-BOND ZFT22 and DURA-BOND ZFT22BR.

This table covers the Torque converters. Typical signs include a sulfur smell, rattling substrate, or an efficiency code. Confirm CARB vs Federal certification in the notes before ordering. Read more

10 Torque Converter parts for the 2020 Dodge Charger come from 2 brands — MOPAR and TC REMANUFACTURING.

This table covers the Torque Converter bolts. Read more

2 Torque Converter Bolt parts are listed for the 2020 Dodge Charger, from ARP and DORMAN. 1 part fits every engine; the other 1 is engine-specific.

Listed part numbers: ARP 1477301 and DORMAN 13875.

This table covers the Torque Converter housings. Read more

MOPAR supplies both parts for the 2020 Dodge Charger.

This group includes MOPAR 52108683AA and MOPAR 52108422AA.

This table covers the seals at the Torque Converter Housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: PA CARGO 181150.

This table covers the seals at the Torque Converter Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 2020 Dodge Charger — MOPAR 68234166AA.

This table covers the automatic-transmission fluids specified for this gearbox. Typical signs include harsh or delayed shifts, fluid that smells burnt, or a shudder at light throttle. Use exactly the specification in the notes. Automatic transmissions are unforgiving of the wrong fluid. Read more

31 Transmission Fluid parts for the 2020 Dodge Charger come from 9 brands — VALVOLINE, PENTOSIN, LIQUI MOLY and 6 other brands. The "Popular" part is MOPAR 68218057AC. They are grouped as ATF +4, Dexron, Multi-Vehicle and ZF Fluid, with Multi-Vehicle the largest group at 13 parts from LIQUI MOLY, VALVOLINE, LUCAS OIL and 2 other brands.

This table covers the conditioners and additives used with this transmission fluid. Read more

7 Transmission Fluid Additive parts for the 2020 Dodge Charger come from LUBEGARD. The "Popular" part is LUBEGARD 19610. 6 parts fit every engine; the other 1 is engine-specific.

This group includes LUBEGARD 19610, LUBEGARD 60902 and LUBEGARD 19689 and the remaining parts above.

This table covers the mounts that hold the transmission to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

4 Transmission Mount parts are listed for the 2020 Dodge Charger, from ANCHOR, DEA / MARMON RIDE CONTROL, PIONEER and 1 other brand. All of them fit every engine offered in the 2020 Charger.

Listed part numbers: ANCHOR 3163, DEA / MARMON RIDE CONTROL A5388 and PIONEER 625388, plus the other parts above.

This table covers the Transmission service kits. Read more

VAICO supplies the 4 Transmission Service Kit parts for the 2020 Dodge Charger.

The Expert Kit (Basic Kit & Transmission Fluid) section lists 2 options from VAICO — grouped under the catalog's "Expert Kit (Basic Kit & Transmission Fluid)" designation — the notes column spells out what sets them apart. VAICO V302254 is listed in this group.

In the Expert Kit + (Expert Kit and Extra Oil for Rinsing) grade, VAICO supplies 2 parts: grouped under the catalog's "Expert Kit + (Expert Kit and Extra Oil for Rinsing)" designation — the notes column spells out what sets them apart. A representative part number is VAICO V302254XXL.

This group includes VAICO V302254, VAICO V330897 and VAICO V302254XXL and the remaining parts above.