2019 Dodge Charger Automatic Transmission Parts

This table covers the Automatic Transmission assemblies. Read more

MOPAR supplies the 3 Automatic Transmission Assembly parts for the 2019 Dodge Charger.

Listed part numbers: MOPAR 68456184AA, MOPAR R8433360AA and MOPAR R8433361AA.

This table covers the control units that command automatic-transmission shifts. Read more

2 Automatic Transmission Control Unit (TCU) parts are listed for the 2019 Dodge Charger, from MOPAR and VEMO.

Part numbers include MOPAR 68347574AA and VEMO V33860001.

This table covers the Bushing kits. Read more

2 Bushing Kit parts for the 2019 Dodge Charger come from 2 brands — DURA-BOND and PA CARGO. 1 part fits every engine; the other 1 is engine-specific.

Listed part numbers: DURA-BOND TK33 and PA CARGO K181901.

This table covers the transmission or transfer-case housings. Read more

2 Case parts for the 2019 Dodge Charger come from MOPAR.

Listed part numbers: MOPAR 52108099AB and MOPAR 52108484AB.

This table covers the vents on a transmission or axle housing. Read more

MOPAR supplies both parts for the 2019 Dodge Charger. All of them fit every engine offered in the 2019 Charger.

Listed part numbers: MOPAR 68084188AB and MOPAR 5143951AA.

This table covers the Clutch plates. Typical signs include warpage, cracks, or a plate that no longer locates the assembly. Confirm which plate the notes describe — backing plates, clutch plates and strike plates are different parts. Read more

PA CARGO supplies the 8 Clutch Plate parts for the 2019 Dodge Charger. PA CARGO 181114 carries the "Popular" badge. All of them fit every engine offered in the 2019 Charger.

This group includes PA CARGO 181114, PA CARGO 181102 and PA CARGO 181112 and the remaining parts above.

This table covers the clutch-plate packs inside the transmission or transfer case. Read more

12 Clutch Plate Pack parts for the 2019 Dodge Charger come from RAYBESTOS POWERTRAIN. The "Popular" part is RAYBESTOS POWERTRAIN RGPZ018.

In the Friction Plate Pack grade, RAYBESTOS POWERTRAIN supplies 7 parts: grouped under the catalog's "Friction Plate Pack" designation — the notes column spells out what sets them apart. A representative part number is RAYBESTOS POWERTRAIN RGPZ018.

The Steel Plate Pack section lists 5 options from RAYBESTOS POWERTRAIN — grouped under the catalog's "Steel Plate Pack" designation — the notes column spells out what sets them apart. RAYBESTOS POWERTRAIN STMCHRY05 is listed in this group.

This table covers the Conductor plates. Typical signs include warpage, cracks, or a plate that no longer locates the assembly. Confirm which plate the notes describe — backing plates, clutch plates and strike plates are different parts. Read more

6 Conductor Plate parts are listed for the 2019 Dodge Charger, from SKP, ULTRA-POWER, DORMAN and 1 other brand. SKP SK917678 carries the "Popular" badge.

Listed part numbers: SKP SK917678, DORMAN 917678 and SKP SK917679, plus the other parts above.

This table covers the Dipstick / Fluid Filler tubes. Read more

3 Dipstick / Fluid Filler Tube parts for the 2019 Dodge Charger come from 2 brands — MOPAR and DORMAN.

This group includes DORMAN 917327, MOPAR 4627311AC and MOPAR 4591880AG.

This table covers the seals at the Extension Housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

8 Extension Housing Seal parts are listed for the 2019 Dodge Charger, from NATIONAL, WJB / INMOTION PARTS, BCA and 1 other brand. BCA NS224250 carries the "Popular" badge. 2 parts fit every engine; the other 6 are engine-specific.

Part numbers include BCA NS224250, NATIONAL 224250 and NATIONAL 710486, among others listed above.

This table covers the replacement filters for this application — the table heading and notes say which circuit. Typical signs include restricted flow — long cranking, weak airflow, or dirty fluid after a short interval. Seat the new filter so it cannot bypass, and use the grade the notes call for. Read more

15 Filter parts for the 2019 Dodge Charger come from 8 brands — MOPAR, VAICO, ELRING and 5 other brands. The "Popular" part is ELRING 482400. 2 parts fit every engine; the other 13 are engine-specific.

In the Basic Kit (Without Transmission Fluid) grade, VAICO supplies 1 part: grouped under the catalog's "Basic Kit (Without Transmission Fluid)" designation — the notes column spells out what sets them apart. A representative part number is VAICO V302254BEK.

The Economy section lists 5 options from ELRING, DORMAN and VARIOUS MFR — the catalog's value-priced group. ELRING 482400 is listed in this group.

In the Standard Replacement grade, MOPAR, ATP, RAYBESTOS POWERTRAIN and 1 other brand supply 8 parts: built to original-equipment specification. A representative part number is ATP B217.

1 further part sits outside the graded sections, with the same engine-level match.

This table covers the flexplates that connect the crankshaft to the torque converter. Read more

2 Flexplate parts are listed for the 2019 Dodge Charger, from ATP and PIONEER.

Part numbers include ATP Z628 and PIONEER FRA553.

This table covers the Flexplate Mounting bolts. Read more

One part is listed for the 2019 Dodge Charger — DORMAN 14131.

This table covers the heat exchangers that cool transmission fluid. Typical signs include fluid that overheats, a leak at the cooler fittings, or milky fluid that says coolant and ATF have mixed. Flush the lines when you replace a cooler. Cross-contamination is how a small leak becomes a transmission job. Read more

This group shows a single part: MOPAR 68272789AA.

This table covers the Fluid Cooler Control valves. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

DORMAN supplies both parts for the 2019 Dodge Charger. All of them fit every engine offered in the 2019 Charger.

Listed part numbers: DORMAN 624651 and DORMAN 724652.

This table covers the Fluid Cooler Line hoses. Typical signs include swelling, cracks, a soft spot, or a leak at a clamp. Replace adjacent aged hoses while the system is drained — they share the same heat cycle. Read more

11 Fluid Cooler Line / Hose parts for the 2019 Dodge Charger come from 5 brands — DORMAN, MOPAR, SUNSONG and 2 other brands. The "Popular" part is DORMAN 624441. 1 part fits every engine; the other 10 are engine-specific.

This table covers the harness connectors at the Fluid Cooler Line / Hose. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2019 Dodge Charger — DORMAN 800723.

This table covers the pans that hold automatic-transmission fluid. Read more

18 Fluid Pan parts are listed for the 2019 Dodge Charger, from MOPAR, SKP, DORMAN and 6 other brands. DORMAN 265850 carries the "Popular" badge. 2 parts fit every engine; the other 16 are engine-specific.

This table covers the Fluid Pan bolts. Read more

2 Fluid Pan Bolt parts for the 2019 Dodge Charger come from 2 brands — MOPAR and REIN.

This group includes MOPAR 68233701AC and REIN HWB1068.

This table covers the Fluid Pan drain plugs. Read more

MOPAR supplies the 3 Fluid Pan Drain Plug parts for the 2019 Dodge Charger.

Listed part numbers: MOPAR 68174052AB, MOPAR 68261186AA and MOPAR 68261581AA.

This table covers the gaskets that seal the Fluid Pan. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

11 Fluid Pan Gasket parts for the 2019 Dodge Charger come from 5 brands — MOPAR, FEL-PRO, MAHLE / CLEVITE and 2 other brands. The "Popular" part is FEL-PRO TOS18764. 3 parts fit every engine; the other 8 are engine-specific.

This table covers the Fluid Pan magnets. Read more

One part is listed for the 2019 Dodge Charger — MOPAR 68207788AA.

This table covers the Fluid pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit. Read more

3 Fluid Pump parts for the 2019 Dodge Charger come from MOPAR.

Part numbers include MOPAR 68517522AA, MOPAR RL087860AA and MOPAR R8087860AA.

This table covers the Fluid Pump O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

This group shows a single part: MOPAR 52107900AA.

This table covers the seals at the Fluid Pump. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

9 Fluid Pump Seal parts are listed for the 2019 Dodge Charger, from NATIONAL, WJB / INMOTION PARTS, JAPANESE OE and 2 other brands. NATIONAL 710608 carries the "Popular" badge. 2 parts fit every engine; the other 7 are engine-specific.

This group includes NATIONAL 710608, WJB / INMOTION PARTS WS710608 and JAPANESE OE 91212PNC004 and the remaining parts above.

This table covers the gasket kits for this job. Typical signs include the leaks that sent this assembly to the bench. Confirm the kit matches the opening you are sealing; unused leftover pieces often belong to another configuration. Read more

One part is listed for the 2019 Dodge Charger — VICTOR REINZ 711917000.

This table covers the Input shafts. Read more

This group shows a single part: MOPAR 52108044AA.

This table covers the seals at the Manual Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Manual Shaft Seal parts are listed for the 2019 Dodge Charger, from NATIONAL and WJB / INMOTION PARTS. All of them fit every engine offered in the 2019 Charger.

Part numbers include NATIONAL 710780 and WJB / INMOTION PARTS WS710780.

This table covers the O-rings and seals at this joint. Read more

One part is listed for the 2019 Dodge Charger — ELRING 428390.

This table covers the Output shafts. Read more

One part is listed for the 2019 Dodge Charger — MOPAR 52120024AA.

This table covers the Output Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

5 Output Shaft Bearing parts are listed for the 2019 Dodge Charger, from SCHAEFFLER, WJB / INMOTION PARTS, BCA and 1 other brand.

Economy: 1 part, from WJB / INMOTION PARTS. A representative part number is WJB / INMOTION PARTS RB6206.

The Standard Replacement section: 3 options from BCA, NATIONAL and SCHAEFFLER. BCA NB206 is listed in this group.

1 ungrouped part is not assigned to a grade, with the same engine-level match.

This group includes WJB / INMOTION PARTS RB6206, BCA NB206 and NATIONAL 206 and the remaining parts above.

This table covers the seals at the Output Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Output Shaft Seal parts for the 2019 Dodge Charger come from 2 brands — NATIONAL and WJB / INMOTION PARTS. Every part fits all 4 engine options (3.6L V6, 5.7L V8, 6.2L V8 Supercharged and 6.4L V8).

Listed part numbers: NATIONAL 710671 and WJB / INMOTION PARTS WS710671.

This table covers the Piston kits. Read more

PA CARGO supplies the 3 Piston Kit parts for the 2019 Dodge Charger. All of them fit every engine offered in the 2019 Charger.

This group includes PA CARGO 92912, PA CARGO 61837A and PA CARGO K18190099.

This table covers the Plug adapters. Read more

One part is listed for the 2019 Dodge Charger — DORMAN 917505.

This table covers the Pressure Control (EPC) solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

This group shows a single part: WELLS 2N1281.

This table covers the rebuild kits for this assembly. Read more

7 Rebuild Kit parts are listed for the 2019 Dodge Charger, from PA CARGO, TRANSTEC and VEMO. PA CARGO K181900 carries the "Popular" badge. 3 parts fit every engine; the other 4 are engine-specific.

In the Banner Kit (Overhaul Kit + Friction Clutch Plates) grade, PA CARGO supplies 1 part: grouped under the catalog's "Banner Kit (Overhaul Kit + Friction Clutch Plates)" designation — the notes column spells out what sets them apart. A representative part number is PA CARGO DK18100S.

The Master Kit (Overhaul Kit + Friction & Steel Clutch Plates) section lists 1 option from PA CARGO — grouped under the catalog's "Master Kit (Overhaul Kit + Friction & Steel Clutch Plates)" designation — the notes column spells out what sets them apart. PA CARGO DK18100 is listed in this group.

In the Overhaul Kit (Gaskets, Seals, O-Rings & Sealing Rings) grade, TRANSTEC and PA CARGO supply 3 parts: grouped under the catalog's "Overhaul Kit (Gaskets, Seals, O-Rings & Sealing Rings)" designation — the notes column spells out what sets them apart. A representative part number is PA CARGO K181900.

2 ungrouped parts are not assigned to a grade, with the same engine-level match.

This group includes PA CARGO K181900, PA CARGO DK18100S and PA CARGO DK18100 and the remaining parts above.

This table covers the Shift cables. Typical signs include a stretched or frayed cable, or a control that no longer reaches the end of its travel. Route the new cable through the same clips. A kinked cable binds and fails early. Read more

MOPAR supplies the 4 Shift Cable parts for the 2019 Dodge Charger. 3 parts fit every engine; the other 1 is engine-specific.

Listed part numbers: MOPAR 4670708AA, MOPAR 4670705AA and MOPAR 68110832AC, plus the other parts above.

This table covers the Shift Improvement kits. Read more

2 Shift Improvement Kit parts for the 2019 Dodge Charger come from 2 brands — SONNAX and TRANSGO.

Part numbers include SONNAX ZF8ZIP and TRANSGO SK7226A.

This table covers the Shift solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

5 Shift Solenoid parts are listed for the 2019 Dodge Charger, from MOPAR, WELLS and STANDARD MOTOR PRODUCTS. WELLS 2N1325 carries the "Popular" badge. 1 part fits every engine; the other 4 are engine-specific.

Part numbers include WELLS 2N1325, MOPAR 52108314AB and MOPAR 5138838AA, among others listed above.

This table covers the Sun gears. Read more

One part is listed for the 2019 Dodge Charger — MOPAR 52108078AA.

This table covers the Sun Gear bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

DURA-BOND supplies the 3 Sun Gear Bushing parts for the 2019 Dodge Charger.

Listed part numbers: DURA-BOND ZFT21BR, DURA-BOND ZFT22 and DURA-BOND ZFT22BR.

This table covers the Torque converters. Typical signs include a sulfur smell, rattling substrate, or an efficiency code. Confirm CARB vs Federal certification in the notes before ordering. Read more

9 Torque Converter parts for the 2019 Dodge Charger come from 2 brands — MOPAR and TC REMANUFACTURING.

Listed part numbers: MOPAR 52109336AA, MOPAR 68144195AA and MOPAR R2109336AA, plus the other parts above.

This table covers the Torque Converter bolts. Read more

2 Torque Converter Bolt parts are listed for the 2019 Dodge Charger, from ARP and DORMAN. 1 part fits every engine; the other 1 is engine-specific.

This group includes ARP 1477301 and DORMAN 13875.

This table covers the Torque Converter housings. Read more

MOPAR supplies the 3 Torque Converter Housing parts for the 2019 Dodge Charger.

Listed part numbers: MOPAR 52108683AA, MOPAR 52107911AA and MOPAR 52108422AA.

This table covers the seals at the Torque Converter Housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: PA CARGO 181150.

This table covers the seals at the Torque Converter Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Torque Converter Shaft Seal parts are listed for the 2019 Dodge Charger, from ACDELCO, MOPAR and SCHAEFFLER.

This group includes ACDELCO 710608, MOPAR 68234166AA and SCHAEFFLER SS2749.