2023 Dodge Charger Engine Parts

This table covers the camshafts that open the valves. Read more

5 Camshaft parts are listed for the 2023 Dodge Charger, from MELLING and MOPAR.

In the Heavy Duty / Towing grade, MELLING supplies 1 part: grouped under the catalog's "Heavy Duty / Towing" designation — the notes column spells out what sets them apart. A representative part number is MELLING 23109.

In the High Performance grade, MELLING supplies 2 parts: engineered beyond original-equipment specification. A representative part number is MELLING 23209.

The Standard Replacement section lists 2 options from MOPAR — built to original-equipment specification. MOPAR 5038808AA is listed in this group.

Part numbers include MELLING 23109, MELLING 23209 and MELLING 23309, among others listed above.

This table covers the Camshaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

One part is listed for the 2023 Dodge Charger — MAHLE / CLEVITE SH2191S.

This table covers the Camshaft plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

2 Camshaft Plug parts are listed for the 2023 Dodge Charger, from MELLING and MOPAR.

Part numbers include MELLING MEP334 and MOPAR 6507663AA.

This table covers the Camshaft Retainer / Thrust plates. Typical signs include warpage, cracks, or a plate that no longer locates the assembly. Confirm which plate the notes describe — backing plates, clutch plates and strike plates are different parts. Read more

2 Camshaft Retainer / Thrust Plate parts for the 2023 Dodge Charger come from 2 brands — MELLING and MOPAR.

Listed part numbers: MELLING MD200 and MOPAR 53022178AE.

This table covers the Circular / Semi-Circular plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

This group shows a single part: ELRING B16450.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

MAHLE / CLEVITE supplies the 4 Connecting Rod Bearing parts for the 2023 Dodge Charger.

High Performance: 2 parts, from MAHLE / CLEVITE. A representative part number is MAHLE / CLEVITE CB1808HXN.

The Standard Replacement section: 2 options from MAHLE / CLEVITE. MAHLE / CLEVITE CB1808P is listed in this group.

This group includes MAHLE / CLEVITE CB1808HXN, MAHLE / CLEVITE CB1808HN and MAHLE / CLEVITE CB1808P and the remaining parts above.

This table covers the Connecting Rod bolts. Read more

This group shows a single part: MOPAR 6508955AA.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

2 Conversion / Lower Gasket Set parts are listed for the 2023 Dodge Charger, from AJUSA and MOPAR.

Part numbers include AJUSA 54321100 and MOPAR 68262328AA.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

3 Crankshaft Main Bearing parts for the 2023 Dodge Charger come from MOPAR.

Part numbers include MOPAR 68418400AA, MOPAR 68418399AA and MOPAR 68418401AA.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

7 Crankshaft Seal parts for the 2023 Dodge Charger come from 4 brands — ELRING, MOPAR, DORMAN and 1 other brand. The "Popular" part is ELRING 942990.

Part numbers include ELRING 942990, MOPAR 53021585AD and DORMAN 635333, among others listed above.

This table covers the gaskets that seal the Crankshaft Seal. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2023 Dodge Charger — ELRING 907600.

This table covers the Cylinder Deactivation Delete Block-Off plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

One part is listed for the 2023 Dodge Charger — MELLING MEP337.

This table covers the Cylinder Head Alignment Dowel pins. Read more

One part is listed for the 2023 Dodge Charger — MOPAR 5203466.

This table covers the bolts that clamp the cylinder head to the block. Read more

One part is listed for the 2023 Dodge Charger — AJUSA 81076700.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Cylinder Head Gasket parts are listed for the 2023 Dodge Charger, from MOPAR, ELRING and AJUSA. MOPAR 68164696AE carries the "Popular" badge.

Listed part numbers: MOPAR 68164696AE, AJUSA 10261600 and ELRING 178330, plus the other parts above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

2 Cylinder Head Gasket Set parts are listed for the 2023 Dodge Charger, from AJUSA and MOPAR.

Part numbers include AJUSA 52604800 and MOPAR 68532010AB.

This table covers the Cylinder Head plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

This group shows a single part: MOPAR 4556020AB.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

This group shows a single part: MOPAR 5149022AC.

This table covers the Engine covers. Read more

8 Engine Cover parts are listed for the 2023 Dodge Charger, from MOPAR, TECHPRO and VARIOUS MFR. MOPAR 68214816AA carries the "Popular" badge.

Listed part numbers: MOPAR 68214816AA, MOPAR 68214815AA and MOPAR 68231862AA, plus the other parts above.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

2 Engine Kit Gasket Set parts are listed for the 2023 Dodge Charger, from AJUSA and MOPAR.

Listed part numbers: AJUSA 50547800 and MOPAR 68262327AF.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

2 Exhaust Valve parts for the 2023 Dodge Charger come from MOPAR.

This group includes MOPAR 5038753AA and MOPAR 5038813AB.

This table covers the Expansion plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

MOPAR supplies both parts for the 2023 Dodge Charger.

This group includes MOPAR 68060349AA and MOPAR 6036307AA.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

One part is listed for the 2023 Dodge Charger — MOPAR 53010831AD.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Intake Manifold Gasket parts are listed for the 2023 Dodge Charger, from AJUSA, ELRING and MOPAR.

Listed part numbers: AJUSA 13329800, AJUSA 77047500 and ELRING 179000, plus the other parts above.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

3 Intake Valve parts for the 2023 Dodge Charger come from 2 brands — MOPAR and MELLING.

Listed part numbers: MELLING V5825, MOPAR 5038812AB and MOPAR 5038331AB.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

8 Motor Mount parts for the 2023 Dodge Charger come from 4 brands — DEA / MARMON RIDE CONTROL, MOPAR, ANCHOR and 1 other brand. The "Popular" part is ANCHOR 3280.

This group includes ANCHOR 3280, PIONEER 613280 and DEA / MARMON RIDE CONTROL A20284 and the remaining parts above.

This table covers the Motor Mount bolts. Read more

One part is listed for the 2023 Dodge Charger — MOPAR 4809963AE.

This table covers the Motor Mount Heat insulators. Read more

MOPAR supplies both parts for the 2023 Dodge Charger.

Part numbers include MOPAR 5038531AA and MOPAR 5090026AA.

This table covers the Motor Mount kits. Read more

This group shows a single part: ANCHOR 300122.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

6 Oil parts for the 2023 Dodge Charger come from 2 brands — VALVOLINE and LIQUI MOLY. The "Popular" part is LIQUI MOLY 2050.

Part numbers include LIQUI MOLY 2050, VALVOLINE VV966 and LIQUI MOLY 2049, among others listed above.

This table covers the heat exchangers that cool engine oil. Typical signs include oil at the cooler fittings, or coolant that looks like a milkshake. Pressure-test both circuits after a cooler swap — a leak here mixes oil and coolant. Read more

This group shows a single part: MOPAR 5181879AE.

This table covers the Oil Cooler Hose pipes. Read more

This group shows a single part: MOPAR 68449582AA.

This table covers the Oil Dipstick tubes. Read more

2 Oil Dipstick / Tube parts for the 2023 Dodge Charger come from MOPAR.

This group includes MOPAR 53010823AC and MOPAR 68195711AG.

This table covers the drain plugs in the oil pan. Read more

6 Oil Drain Plug parts for the 2023 Dodge Charger come from 4 brands — DORMAN, ELRING, MOPAR and 1 other brand. The "Popular" part is DORMAN 090053.

Listed part numbers: DORMAN 090053, DORMAN 090115 and ELRING 298480, plus the other parts above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2023 Dodge Charger — ELRING 176090.

This table covers the caps on the oil filler neck. Read more

2 Oil Filler Cap parts for the 2023 Dodge Charger come from 2 brands — MOPAR and MOTORAD.

This group includes MOPAR 68206054AA and MOTORAD MO158.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

17 Oil Filter parts for the 2023 Dodge Charger come from 13 brands — FRAM, FVP, VARIOUS MFR and 10 other brands. The "Popular" part is CHAMP / LUBER-FINER PH48.

The Economy section lists 6 options from CHAMP / LUBER-FINER, FRAM, FVP and 3 other brands — the catalog's value-priced group. CHAMP / LUBER-FINER PH48 is listed in this group.

The High Performance / Heavy Duty section lists 2 options from WIX and MOBIL — grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. WIX 57899XP is listed in this group.

Standard Replacement: 9 parts, from BOSCH, FRAM, ACDELCO and 6 other brands. A representative part number is BOSCH 3334.

This table covers the Oil Level Sensor Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

This group shows a single part: MOPAR 53034112AA.

This table covers the oil pans that hold the engine's oil sump. Read more

One part is listed for the 2023 Dodge Charger — MOPAR 53010814AA.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Oil Pan Gasket parts for the 2023 Dodge Charger come from 3 brands — AJUSA, ELRING and MOPAR.

Listed part numbers: AJUSA 14118800, ELRING 178990 and MOPAR 68165605AA.

This table covers the Oil pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit. Read more

3 Oil Pump parts for the 2023 Dodge Charger come from 3 brands — ENGINETECH, MELLING and MOPAR.

The High Volume / Pressure section lists 2 options from ENGINETECH and MELLING — grouped under the catalog's "High Volume / Pressure" designation — the notes column spells out what sets them apart. ENGINETECH EP452HV is listed in this group.

Standard Replacement: 1 part, from MOPAR. A representative part number is MOPAR 68195993AD.

This group includes ENGINETECH EP452HV, MELLING M452HV and MOPAR 68195993AD.

This table covers the gaskets that seal the Oil Pump. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2023 Dodge Charger — ELRING 278327.

This table covers the pickup tubes and screens that feed the oil pump. Read more

2 Oil Pump Pickup Tube / Screen parts are listed for the 2023 Dodge Charger, from MELLING and MOPAR.

Listed part numbers: MELLING 425S and MOPAR 5038360AA.

This table covers the O-rings that seal the oil-pump pickup tube. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

This group shows a single part: MOPAR 53020861.

This table covers the pistons that travel in each cylinder. Typical signs include knock, blow-by, or a cylinder that will not hold compression. Piston work is a short-block job. Match bore, pin and ring pack in the notes — not the photo. Read more

MOPAR supplies the 4 Piston parts for the 2023 Dodge Charger.

Part numbers include MOPAR 53010808AF, MOPAR 53010809AF and MOPAR 53010927AD, among others listed above.

This table covers the rings that seal each piston to the cylinder wall. Read more

5 Piston Ring parts are listed for the 2023 Dodge Charger, from HASTINGS MANUFACTURING, MOPAR and ENGINETECH. HASTINGS MANUFACTURING 2M4161 carries the "Popular" badge.

The Premium section lists 3 options from HASTINGS MANUFACTURING and ENGINETECH — a step above OE specification in materials, tolerances or warranty terms. HASTINGS MANUFACTURING 2M4161 is listed in this group.

The Standard Replacement section: 2 options from MOPAR. MOPAR 68262329AC is listed in this group.

This group includes HASTINGS MANUFACTURING 2M4161, ENGINETECH M40908 and HASTINGS MANUFACTURING 2M4161S and the remaining parts above.

This table covers the pushrods that transfer lifter motion to the rocker arms. Read more

5 Push Rod parts are listed for the 2023 Dodge Charger, from MELLING, MOPAR and SBI. MELLING MPR667 carries the "Popular" badge.

Listed part numbers: MELLING MPR667, MELLING MPR668 and MOPAR 5045516AA, plus the other parts above.

This table covers the rocker arms that transfer cam motion to the valves. Read more

7 Rocker Arm parts for the 2023 Dodge Charger come from 3 brands — ENGINETECH, MELLING and QUALCAST. The "Popular" part is MELLING MRK1553E.

Listed part numbers: MELLING MRK1553E, MELLING MRK1552I and ENGINETECH ERK355, plus the other parts above.

This table covers the gaskets that seal the Supercharger. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: MOPAR 68267539AA.

This table covers the Supercharger pressure sensors. Typical signs include a check-engine light for MAP or fuel-rail pressure, or a limp mode under load. A vacuum leak or a clogged reference line will fake a bad pressure sensor. Read more

This group shows a single part: WELLS 5S15736.

This table covers the Thrust washers. Read more

This group shows a single part: MAHLE / CLEVITE TW611S.

This table covers the timing chains that keep the cams in time with the crank. Read more

5 Timing Chain parts are listed for the 2023 Dodge Charger, from MELLING, CLOYES, MOPAR and 2 other brands. MELLING 750 carries the "Popular" badge.

This group includes MELLING 750, CLOYES C750 and MOPAR 53022316AC and the remaining parts above.

This table covers kits that group a timing chain with the related tensioners and guides. Read more

6 Timing Chain & Component Kit parts for the 2023 Dodge Charger come from 4 brands — S.A. GEAR, MELLING, CLOYES and 1 other brand. The "Popular" part is S.A. GEAR 76223V.

The Economy section: 3 options from S.A. GEAR. S.A. GEAR 76223V is listed in this group.

Standard Replacement: 3 parts, from MELLING, CLOYES and INA. A representative part number is MELLING 3750SX.

Listed part numbers: S.A. GEAR 76223V, S.A. GEAR 76223 and S.A. GEAR 76223VV, plus the other parts above.

This table covers the gaskets that seal the Timing Chain Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Timing Chain Cover Gasket parts are listed for the 2023 Dodge Charger, from ELRING and MOPAR.

Part numbers include ELRING 488050 and MOPAR 53021521AD.

This table covers the guides and dampers that keep the timing chain on its path. Read more

5 Timing Chain Guide / Damper parts are listed for the 2023 Dodge Charger, from MELLING, CLOYES, MOPAR and 2 other brands. MELLING BG5599 carries the "Popular" badge.

Part numbers include MELLING BG5599, CLOYES 95599 and MOPAR 4893429AA, among others listed above.

This table covers the tensioners that keep the timing chain taut. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

5 Timing Chain Tensioner parts for the 2023 Dodge Charger come from 5 brands — MELLING, CLOYES, MOPAR and 2 other brands. The "Popular" part is MELLING BT7002.

Part numbers include MELLING BT7002, CLOYES 95598 and MOPAR 53022115AH, among others listed above.

This table covers the Timing covers. Read more

One part is listed for the 2023 Dodge Charger — MOPAR 68165888AE.

This table covers the Timing Cover bolts. Read more

This group shows a single part: MOPAR 6506332AA.

This table covers the gaskets that seal the Timing Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: ELRING B38620.

This table covers the crankshaft sprockets that drive the timing chain or belt. Read more

4 Timing Crank Sprocket parts for the 2023 Dodge Charger come from 4 brands — CLOYES, MELLING, MOPAR and 1 other brand.

Listed part numbers: CLOYES S1151 and MOPAR 68362047AA, plus the other parts above.

This table covers the fasteners that mount the turbocharger. Read more

AJUSA supplies both parts for the 2023 Dodge Charger.

This group includes AJUSA 77047300 and AJUSA 77047400.

This table covers the Valve covers. Read more

MOPAR supplies the 4 Valve Cover parts for the 2023 Dodge Charger.

This group includes MOPAR 53011593AB, MOPAR 53011594AB and MOPAR 53011596AB and the remaining parts above.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Valve Cover Gasket parts for the 2023 Dodge Charger come from 3 brands — FEL-PRO, ELRING and ULTRA-POWER. The "Popular" part is FEL-PRO VS50625R.

Part numbers include FEL-PRO VS50625R, ELRING 927100 and ELRING 178940, among others listed above.

This table covers the lifters / tappets that transfer cam motion to the valves. Read more

5 Valve Lifter parts for the 2023 Dodge Charger come from 3 brands — MOPAR, MELLING and SBI. The "Popular" part is MOPAR 5038784AD.

This group includes MOPAR 5038784AD, MELLING JBK8521 and MELLING MVLK100 and the remaining parts above.

This table covers the guides that keep each lifter aligned. Read more

2 Valve Lifter Guide parts for the 2023 Dodge Charger come from 2 brands — MELLING and MOPAR.

Part numbers include MELLING MLG103 and MOPAR 53021721AA.

This table covers the Valve seats. Read more

2 Valve Seat parts are listed for the 2023 Dodge Charger, from MELLING and MOPAR.

Listed part numbers: MELLING 4780416 and MOPAR 5038834AA.