2026 Dodge Charger Engine Parts

This table covers the camshafts that open the valves. Read more

4 Camshaft parts for the 2026 Dodge Charger come from MOPAR.

This group includes MOPAR 68357704AF, MOPAR 68357717AF and MOPAR 68415094AE and the remaining parts above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 2026 Dodge Charger — MOPAR 68358259AE.

This table covers the cylinder heads that close the top of the block. Read more

MOPAR supplies both parts for the 2026 Dodge Charger.

Part numbers include MOPAR 68358338AG and MOPAR 68414043AG.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Cylinder Head Gasket parts for the 2026 Dodge Charger come from MOPAR.

Listed part numbers: MOPAR 68419959AE and MOPAR 68736648AA.

This table covers the Cylinder Head plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

One part is listed for the 2026 Dodge Charger — MOPAR 4884893AA.

This table covers the Engine covers. Read more

9 Engine Cover parts for the 2026 Dodge Charger come from MOPAR. 1 part fits every engine; the other 8 are engine-specific.

Part numbers include MOPAR 53011661AB, MOPAR 68584698AE and MOPAR 68586069AB, among others listed above.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

One part is listed for the 2026 Dodge Charger — MOPAR 68306859AB.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

2 Harmonic Balancer parts for the 2026 Dodge Charger come from MOPAR.

This group includes MOPAR 68418496AD and MOPAR 68519168AA.

This table covers the Intake manifolds. Typical signs include an exhaust tick, a vacuum leak, or a gasket that has burned through. Replace the gaskets and hardware; a warped flange will leak with a new gasket alone. Read more

MOPAR supplies both parts for the 2026 Dodge Charger.

Part numbers include MOPAR 53010907AH and MOPAR 68442672AH.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: MOPAR 53010946AB.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

One part is listed for the 2026 Dodge Charger — MOPAR 68332962AC.

This table covers the long-block engine assemblies (block, crank, heads). Read more

4 Long Block parts for the 2026 Dodge Charger come from MOPAR.

Listed part numbers: MOPAR 68545784AD, MOPAR 68586085AF and MOPAR 68776838AA, plus the other parts above.

This table covers the brackets that mount the Motor Mount. Typical signs include a cracked mount, a rattle, or a bracket that no longer holds alignment. Confirm position in the notes. Many brackets look alike and bolt to different corners. Read more

MOPAR supplies the 5 Motor Mount Bracket parts for the 2026 Dodge Charger.

This group includes MOPAR 68590098AD, MOPAR 68590099AD and MOPAR 68590104AA and the remaining parts above.

This table covers the isolators in an engine mount. Read more

4 Motor Mount Isolator parts for the 2026 Dodge Charger come from MOPAR. 2 parts fit every engine; the other 2 are engine-specific.

Part numbers include MOPAR 68590090AB, MOPAR 68590091AB and MOPAR 68590126AC, among others listed above.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

12 Oil parts are listed for the 2026 Dodge Charger, from VALVOLINE, PENTOSIN, MOBIL and 1 other brand. MOBIL 112628 carries the "Popular" badge.

This table covers the heat exchangers that cool engine oil. Typical signs include oil at the cooler fittings, or coolant that looks like a milkshake. Pressure-test both circuits after a cooler swap — a leak here mixes oil and coolant. Read more

One part is listed for the 2026 Dodge Charger — MOPAR 68358144AF.

This table covers the drain plugs in the oil pan. Read more

MOPAR supplies both parts for the 2026 Dodge Charger.

This group includes MOPAR 6507741AA and MOPAR 68715013AA.

This table covers the Oil Filler tubes. Read more

One part is listed for the 2026 Dodge Charger — MOPAR 68567288AB.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

7 Oil Filter parts are listed for the 2026 Dodge Charger, from WIX, FVP, PRO-TEC and 3 other brands. WIX WL10255XP carries the "Popular" badge.

In the Economy grade, FVP and PRO-TEC supply 2 parts: the catalog's value-priced group. A representative part number is FVP R0255.

In the High Performance / Heavy Duty grade, WIX and MOBIL supply 2 parts: grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. A representative part number is WIX WL10255XP.

The Standard Replacement section lists 3 options from WIX, HASTINGS / BALDWIN and MOPAR — built to original-equipment specification. WIX WL10255 is listed in this group.

Part numbers include WIX WL10255XP, FVP R0255 and PRO-TEC PXL10255, among others listed above.

This table covers the Oil Filter adapters. Read more

This group shows a single part: MOPAR 68466235AD.

This table covers the Oil Level sensors. Typical signs include a warning lamp, a stored code, or a reading that drops out when the harness is wiggled. Inspect the connector and ground before replacing the sensor — wiring faults are often condemned as bad sensors. Read more

One part is listed for the 2026 Dodge Charger — MOPAR 68440533AB.

This table covers the oil pans that hold the engine's oil sump. Read more

This group shows a single part: MOPAR 68590200AG.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

MOPAR supplies both parts for the 2026 Dodge Charger.

Listed part numbers: MOPAR 68359145AC and MOPAR 68591032AB.

This table covers the Oil pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit. Read more

One part is listed for the 2026 Dodge Charger — MOPAR 68585094AI.

This table covers the pickup tubes and screens that feed the oil pump. Read more

This group shows a single part: MOPAR 68591017AD.

This table covers the rocker arms that transfer cam motion to the valves. Read more

One part is listed for the 2026 Dodge Charger — MOPAR 5048711AA.

This table covers the timing chains that keep the cams in time with the crank. Read more

2 Timing Chain parts for the 2026 Dodge Charger come from MOPAR.

This group includes MOPAR 68462682AB and MOPAR 68462682AC.

This table covers the guides and dampers that keep the timing chain on its path. Read more

5 Timing Chain Guide / Damper parts for the 2026 Dodge Charger come from MOPAR.

Listed part numbers: MOPAR 68462669AA, MOPAR 68462670AA and MOPAR 68462679AA, plus the other parts above.

This table covers the tensioners that keep the timing chain taut. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

MOPAR supplies both parts for the 2026 Dodge Charger.

Part numbers include MOPAR 68462665AB and MOPAR 68462666AB.

This table covers the Timing covers. Read more

This group shows a single part: MOPAR 68639408AB.

This table covers the crankshaft sprockets that drive the timing chain or belt. Read more

One part is listed for the 2026 Dodge Charger — MOPAR 68462683AA.

This table covers the Timing Idler sprockets. Read more

This group shows a single part: MOPAR 68462685AB.

This table covers the turbochargers that compress intake air. Read more

MOPAR supplies the 4 Turbocharger parts for the 2026 Dodge Charger.

Part numbers include MOPAR 68358314AL, MOPAR 68358315AL and MOPAR 68547504AE, among others listed above.

This table covers the gaskets that seal the Turbocharger. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: MOPAR 68442816AC.

This table covers the Turbocharger Oil Line Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

One part is listed for the 2026 Dodge Charger — MOPAR 68517717AA.

This table covers the adjusters that set valve lash. Read more

One part is listed for the 2026 Dodge Charger — MOPAR 5047979AA.

This table covers the Valve covers. Read more

This group shows a single part: MOPAR 68359155AI.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2026 Dodge Charger — MOPAR 68359157AC.

This table covers the Valve Spring retainers. Read more

This group shows a single part: MOPAR 4893587AA.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

MOPAR supplies both parts for the 2026 Dodge Charger.

Listed part numbers: MOPAR 68361987AB and MOPAR 68361988AB.

This table covers the oil-control solenoids that command the cam phasers. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

MOPAR supplies both parts for the 2026 Dodge Charger.

Part numbers include MOPAR 68357718AC and MOPAR 68357720AC.

This table covers the cam phaser sprockets used by the variable-valve-timing system. Read more

MOPAR supplies both parts for the 2026 Dodge Charger.

This group includes MOPAR 68465314AE and MOPAR 68465315AD.