1991 Eagle Vista Engine Parts

This table covers the Balance Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

One part is listed for the 1991 Eagle Vista — SEALED POWER 1810M.

This table covers the Balance Shaft belts. Typical signs include squeal on cold start, cracked ribs, or glazing. Spin the tensioner and idlers by hand while the belt is off. Read more

7 Balance Shaft Belt parts for the 1991 Eagle Vista come from 5 brands — CONTINENTAL, ROADMAX, GATES and 2 other brands. The "Popular" part is CONTINENTAL 40159.

The Economy section lists 3 options from CONTINENTAL and ROADMAX — the catalog's value-priced group. CONTINENTAL CD090 is listed in this group.

In the Standard Replacement grade, CONTINENTAL, GATES, ACDELCO and 1 other brand supply 4 parts: built to original-equipment specification. A representative part number is CONTINENTAL 40159.

Part numbers include CONTINENTAL 40159, CONTINENTAL CD090 and CONTINENTAL CD159, among others listed above.

This table covers the wear sleeves used to restore a Balance Shaft seal surface. Read more

4 Balance Shaft Repair Sleeve parts for the 1991 Eagle Vista come from 4 brands — NATIONAL, SCHAEFFLER, SKF and 1 other brand.

Part numbers include NATIONAL 99098 and SCHAEFFLER SR3458, among others listed above.

This table covers the seals at the Balance Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

5 Balance Shaft Seal parts for the 1991 Eagle Vista come from 5 brands — NATIONAL, BCA, JAPANESE OE and 2 other brands. The "Popular" part is NATIONAL 712007.

Part numbers include NATIONAL 712007, BCA NS712007 and JAPANESE OE KJ413209, among others listed above.

This table covers the Camshaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

2 Camshaft Bearing parts for the 1991 Eagle Vista come from 2 brands — DURA-BOND and KING ENGINE BEARINGS.

Listed part numbers: DURA-BOND MIA3 and KING ENGINE BEARINGS CS3305BB.

This table covers the wear sleeves used to restore a Camshaft seal surface. Read more

5 Camshaft Repair Sleeve parts are listed for the 1991 Eagle Vista, from BCA, NATIONAL, SCHAEFFLER and 2 other brands. 3 parts fit every engine; the other 2 are engine-specific.

This group includes BCA NS99139, NATIONAL 99139 and SCHAEFFLER SR3472 and the remaining parts above.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

7 Camshaft Seal parts are listed for the 1991 Eagle Vista, from FEL-PRO, NATIONAL, AJUSA and 4 other brands. FEL-PRO TCS45483 carries the "Popular" badge. All of them fit every engine offered in the 1991 Vista.

This group includes FEL-PRO TCS45483, NATIONAL 3771 and AJUSA 15013300 and the remaining parts above.

This table covers the Circular / Semi-Circular plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

2 Circular / Semi-Circular Plug parts are listed for the 1991 Eagle Vista, from FEL-PRO and VICTOR REINZ.

Part numbers include FEL-PRO CP75001 and VICTOR REINZ 711616600.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

5 Connecting Rod Bearing parts for the 1991 Eagle Vista come from 2 brands — KING ENGINE BEARINGS and SEALED POWER. The "Popular" part is SEALED POWER 43485CP.

The High Performance section lists 3 options from KING ENGINE BEARINGS — engineered beyond original-equipment specification. KING ENGINE BEARINGS CR4481XP is listed in this group.

Standard Replacement: 2 parts, from SEALED POWER and KING ENGINE BEARINGS. A representative part number is SEALED POWER 43485CP.

This group includes SEALED POWER 43485CP, KING ENGINE BEARINGS CR4481XP and KING ENGINE BEARINGS CR4481XPC and the remaining parts above.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

7 Conversion / Lower Gasket Set parts for the 1991 Eagle Vista come from 4 brands — AJUSA, FEL-PRO, VICTOR REINZ and 1 other brand.

Part numbers include AJUSA 54041100, AJUSA 54042200 and FEL-PRO CS87671, among others listed above.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

3 Crankshaft Main Bearing parts are listed for the 1991 Eagle Vista, from SEALED POWER and KING ENGINE BEARINGS.

Part numbers include KING ENGINE BEARINGS MB5227AM, SEALED POWER 6630M and SEALED POWER 5103M.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

8 Crankshaft Repair Sleeve parts are listed for the 1991 Eagle Vista, from WJB / INMOTION PARTS, BCA, NATIONAL and 4 other brands. BCA NS99315 carries the "Popular" badge. 2 parts fit every engine; the other 6 are engine-specific.

This group includes BCA NS99315, NATIONAL 99114 and FEL-PRO 16275 and the remaining parts above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

16 Crankshaft Seal parts are listed for the 1991 Eagle Vista, from FEL-PRO, NATIONAL, WJB / INMOTION PARTS and 4 other brands. FEL-PRO BS400971 carries the "Popular" badge.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Cylinder Head Gasket parts for the 1991 Eagle Vista come from 4 brands — FEL-PRO, VICTOR REINZ, AJUSA and 1 other brand.

Listed part numbers: AJUSA 10042400, FEL-PRO 9758PT and FEL-PRO 9086PT, plus the other parts above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

7 Cylinder Head Gasket Set parts for the 1991 Eagle Vista come from 4 brands — FEL-PRO, VICTOR REINZ, AJUSA and 1 other brand.

This group includes AJUSA 52075300, FEL-PRO HIS9758PT and FEL-PRO HS9758PT and the remaining parts above.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

2 Engine Kit Gasket Set parts for the 1991 Eagle Vista come from AJUSA.

Listed part numbers: AJUSA 50121000 and AJUSA 50086000.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

3 Exhaust Valve parts are listed for the 1991 Eagle Vista, from QUALCAST and SBI.

Part numbers include QUALCAST 1010497, QUALCAST 1010142 and SBI 10497.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

3 Harmonic Balancer parts for the 1991 Eagle Vista come from 3 brands — ATP, DORMAN and PIONEER.

Part numbers include ATP 102304, DORMAN 594876 and PIONEER DA152.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

7 Intake Manifold Gasket parts for the 1991 Eagle Vista come from 4 brands — AJUSA, FEL-PRO, VICTOR REINZ and 1 other brand.

This group includes AJUSA 13088500, AJUSA 13055400 and FEL-PRO MS94789 and the remaining parts above.

This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Intake Plenum Gasket parts are listed for the 1991 Eagle Vista, from AJUSA and FEL-PRO.

Part numbers include AJUSA 00692500 and FEL-PRO MS94275.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

4 Intake Valve parts are listed for the 1991 Eagle Vista, from SBI, QUALCAST and SEALED POWER.

Listed part numbers: QUALCAST 1010141, SBI 10495 and SBI 10496, plus the other parts above.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

MOBIL supplies the 20 Oil parts for the 1991 Eagle Vista. MOBIL 125195 carries the "Popular" badge. 18 parts fit every engine; the other 2 are engine-specific.

In the Full Synthetic grade, MOBIL supplies 9 parts: full-synthetic oils. A representative part number is MOBIL 125195.

In the Heavy Duty / Diesel grade, MOBIL supplies 1 part: grouped under the catalog's "Heavy Duty / Diesel" designation — the notes column spells out what sets them apart. A representative part number is MOBIL 122253.

The High Mileage (>75,000 Miles) section lists 7 options from MOBIL — oils grouped for high-mileage engines. MOBIL 125202 is listed in this group.

In the Synthetic Blend grade, MOBIL supplies 3 parts: synthetic-blend oils. A representative part number is MOBIL 124406.

This table covers the Oil Cooler Mounting kits. Read more

2 Oil Cooler Mounting Kit parts for the 1991 Eagle Vista come from HAYDEN. Every part fits both the 1.5L L4 and the 2.0L L4.

This group includes HAYDEN 238 and HAYDEN 153.

This table covers the drain plugs in the oil pan. Read more

5 Oil Drain Plug parts are listed for the 1991 Eagle Vista, from DORMAN, AGS and SKP. DORMAN 090053 carries the "Popular" badge. All of them fit every engine offered in the 1991 Vista.

Part numbers include DORMAN 090053, AGS ODP00007 and DORMAN 090075, among others listed above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Oil Drain Plug Gasket parts for the 1991 Eagle Vista come from AJUSA.

This group includes AJUSA 18001000 and AJUSA 22008900.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

7 Oil Filter parts are listed for the 1991 Eagle Vista, from CHAMP / LUBER-FINER, PRO-TEC, VARIOUS MFR and 4 other brands. BOSCH 3421 carries the "Popular" badge. All of them fit every engine offered in the 1991 Vista.

Economy: 3 parts, from CHAMP / LUBER-FINER, PRO-TEC and VARIOUS MFR. A representative part number is CHAMP / LUBER-FINER PH2856A.

The Standard Replacement section: 4 options from BOSCH, WIX, FRAM and 1 other brand. BOSCH 3421 is listed in this group.

Part numbers include BOSCH 3421, CHAMP / LUBER-FINER PH2856A and PRO-TEC PXL51381, among others listed above.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Oil Pan Gasket parts are listed for the 1991 Eagle Vista, from AJUSA, FEL-PRO and VICTOR REINZ.

Part numbers include AJUSA 14027300, AJUSA 14038100 and FEL-PRO OS30414C, among others listed above.

This table covers the seals at the Oil Pump. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Oil Pump Seal parts for the 1991 Eagle Vista come from 3 brands — BCA, NATIONAL and WJB / INMOTION PARTS.

Listed part numbers: BCA NS221710, NATIONAL 221710 and WJB / INMOTION PARTS WS221710.

This table covers the pistons that travel in each cylinder. Typical signs include knock, blow-by, or a cylinder that will not hold compression. Piston work is a short-block job. Match bore, pin and ring pack in the notes — not the photo. Read more

This group shows a single part: SILV-O-LITE 3217.

This table covers the rings that seal each piston to the cylinder wall. Read more

9 Piston Ring parts for the 1991 Eagle Vista come from 3 brands — HASTINGS MANUFACTURING, SEALED POWER and MAHLE / CLEVITE. The "Popular" part is HASTINGS MANUFACTURING 5716.

In the Premium grade, SEALED POWER, HASTINGS MANUFACTURING and MAHLE / CLEVITE supply 4 parts: a step above OE specification in materials, tolerances or warranty terms. A representative part number is HASTINGS MANUFACTURING 2M5716.

Standard Replacement: 5 parts, from HASTINGS MANUFACTURING and SEALED POWER. A representative part number is HASTINGS MANUFACTURING 5716.

This group includes HASTINGS MANUFACTURING 5716, HASTINGS MANUFACTURING 2M5716 and MAHLE / CLEVITE 41599 and the remaining parts above.

This table covers the Timing belts. Typical signs include squeal on cold start, cracked ribs, or glazing. Spin the tensioner and idlers by hand while the belt is off. Read more

10 Timing Belt parts for the 1991 Eagle Vista come from 6 brands — CONTINENTAL, GATES, DAYCO and 3 other brands. The "Popular" part is GATES T128.

The Economy section: 2 options from CONTINENTAL and MAHLE / CLEVITE. CONTINENTAL CD158 is listed in this group.

Standard Replacement: 8 parts, from GATES, CONTINENTAL, DAYCO and 2 other brands. A representative part number is GATES T128.

This table covers the Timing Belt & component kits. Read more

6 Timing Belt & Component Kit parts are listed for the 1991 Eagle Vista, from ACDELCO, GMB, CONTINENTAL and 1 other brand.

This group includes ACDELCO TCK128, ACDELCO TCK158 and CONTINENTAL TB158159K2 and the remaining parts above.

This table covers the Timing Belt tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

4 Timing Belt Tensioner parts are listed for the 1991 Eagle Vista, from DAYCO, GATES, GMB and 1 other brand.

This group includes DAYCO 84011, GATES T41042 and GMB 4488090 and the remaining parts above.

This table covers the Timing Cover Dust Seal sets. Read more

One part is listed for the 1991 Eagle Vista — VICTOR REINZ 151097001.

This table covers the wear sleeves used to restore a Timing Cover seal surface. Read more

One part is listed for the 1991 Eagle Vista — SKF 99114.

This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

SKF supplies both parts for the 1991 Eagle Vista.

Listed part numbers: SKF 11671 and SKF 17629.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

10 Valve Cover Gasket parts are listed for the 1991 Eagle Vista, from FEL-PRO, VICTOR REINZ, AJUSA and 1 other brand. FEL-PRO VS50234R carries the "Popular" badge.

This table covers the Valve Cover grommets. Read more

One part is listed for the 1991 Eagle Vista — VICTOR REINZ 151012801.

This table covers the pressed-in bronze and cast-iron guides that align valve stems. Typical signs include oil smoke on startup, a guide that has gone oval, or a valve that no longer seats quietly. Guides are a machine-shop fit. Confirm stem diameter in the notes before ordering. Read more

8 Valve Guide parts are listed for the 1991 Eagle Vista, from QUALCAST, SEALED POWER and SBI. QUALCAST 307574 carries the "Popular" badge.

Part numbers include QUALCAST 307574, SEALED POWER VG714 and QUALCAST 307578, among others listed above.

This table covers the lifters / tappets that transfer cam motion to the valves. Read more

4 Valve Lifter parts are listed for the 1991 Eagle Vista, from AJUSA, MELLING, QUALCAST and 1 other brand.

Listed part numbers: AJUSA 85004400, MELLING JB2250 and QUALCAST 366000, plus the other parts above.

This table covers the Valve seats. Read more

6 Valve Seat parts for the 1991 Eagle Vista come from 3 brands — SBI, QUALCAST and DURA-BOND. The "Popular" part is QUALCAST 21112552.

This group includes QUALCAST 21112552, DURA-BOND 31048 and QUALCAST 21175061 and the remaining parts above.

This table covers the springs that close each intake and exhaust valve. Typical signs include a sagging corner, a broken coil, or a clunk from the spring pocket. Replace springs in axle pairs and inspect the seats. Read more

This group shows a single part: QUALCAST 321289.

This table covers the keepers that lock each valve-spring retainer to the stem. Read more

2 Valve Spring Retainer Keeper parts for the 1991 Eagle Vista come from 2 brands — QUALCAST and SBI.

Listed part numbers: QUALCAST 34716 and SBI 1211031.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

10 Valve Stem Seal parts are listed for the 1991 Eagle Vista, from AJUSA, FEL-PRO, QUALCAST and 2 other brands. FEL-PRO SS72805 carries the "Popular" badge.