1993 Eagle 2000 GTX Automatic Transmission Parts

This table covers the wear sleeves used to restore a Extension Housing seal surface. Read more

3 Extension Housing Repair Sleeve parts are listed for the 1993 Eagle 2000 GTX, from NATIONAL, SKF and WJB / INMOTION PARTS.

Listed part numbers: NATIONAL 99128 and WJB / INMOTION PARTS WS99128, plus the other parts above.

This table covers the seals at the Extension Housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 1993 Eagle 2000 GTX — WJB / INMOTION PARTS WS710317.

This table covers the replacement filters for this application — the table heading and notes say which circuit. Typical signs include restricted flow — long cranking, weak airflow, or dirty fluid after a short interval. Seat the new filter so it cannot bypass, and use the grade the notes call for. Read more

15 Filter parts for the 1993 Eagle 2000 GTX come from 6 brands — ATP, PIONEER, CHAMP / LUBER-FINER and 3 other brands. The "Popular" part is ATP JX150.

The Economy section lists 4 options from ATP, CHAMP / LUBER-FINER and PUROLATOR — the catalog's value-priced group. ATP TF133 is listed in this group.

In the Standard Replacement grade, ATP, PIONEER, FRAM and 1 other brand supply 11 parts: built to original-equipment specification. A representative part number is ATP JX150.

This table covers the gaskets that seal the Fluid Pan. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Fluid Pan Gasket parts for the 1993 Eagle 2000 GTX come from 3 brands — FEL-PRO, ATP and PIONEER. The "Popular" part is FEL-PRO TOS18665.

Listed part numbers: FEL-PRO TOS18665, FEL-PRO TOS18703 and ATP TG103, plus the other parts above.

This table covers the precision wear sleeves used to restore a transmission pump seal surface. Read more

One part is listed for the 1993 Eagle 2000 GTX — SKF 99168.

This table covers the seals at the Fluid Pump. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Fluid Pump Seal parts are listed for the 1993 Eagle 2000 GTX, from ATP, PIONEER, SCHAEFFLER and 1 other brand.

Part numbers include ATP TO35, PIONEER 759041 and SCHAEFFLER SS2731, among others listed above.

This table covers the seals at the Input Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Input Shaft Seal parts are listed for the 1993 Eagle 2000 GTX, from BCA, NATIONAL and WJB / INMOTION PARTS.

Listed part numbers: BCA NS223014, NATIONAL 223014 and WJB / INMOTION PARTS WS223014.

This table covers the wear sleeves used to restore a Output Shaft seal surface. Read more

5 Output Shaft Repair Sleeve parts for the 1993 Eagle 2000 GTX come from 5 brands — NATIONAL, BCA, SCHAEFFLER and 2 other brands. The "Popular" part is NATIONAL 99139.

This group includes NATIONAL 99139, BCA NS99139 and SCHAEFFLER SR3472 and the remaining parts above.

This table covers the seals at the Output Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

11 Output Shaft Seal parts for the 1993 Eagle 2000 GTX come from 7 brands — SCHAEFFLER, WJB / INMOTION PARTS, NATIONAL and 4 other brands. The "Popular" part is SCHAEFFLER SS2475.

This table covers the Pressure Control (EPC) solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

3 Pressure Control (EPC) Solenoid parts for the 1993 Eagle 2000 GTX come from PIONEER.

This group includes PIONEER 771034, PIONEER 772050 and PIONEER 772051.

This table covers the rebuild kits for this assembly. Read more

6 Rebuild Kit parts are listed for the 1993 Eagle 2000 GTX, from PIONEER and ATP. ATP TM63 carries the "Popular" badge.

The Master Kit (Overhaul Kit + Friction & Steel Clutch Plates) section lists 4 options from PIONEER and ATP — grouped under the catalog's "Master Kit (Overhaul Kit + Friction & Steel Clutch Plates)" designation — the notes column spells out what sets them apart. ATP TM63 is listed in this group.

In the Overhaul Kit (Gaskets, Seals, O-Rings & Sealing Rings) grade, ATP and PIONEER supply 2 parts: grouped under the catalog's "Overhaul Kit (Gaskets, Seals, O-Rings & Sealing Rings)" designation — the notes column spells out what sets them apart. A representative part number is ATP NGS15.

This group includes ATP TM63, PIONEER 752069 and PIONEER 752065 and the remaining parts above.

This table covers the Shift solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

4 Shift Solenoid parts are listed for the 1993 Eagle 2000 GTX, from ATP and PIONEER.

Part numbers include ATP NE17, ATP NE18 and PIONEER 771035, among others listed above.

This table covers the Torque Converter Clutch solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

3 Torque Converter Clutch Solenoid parts for the 1993 Eagle 2000 GTX come from ATP.

Part numbers include ATP TE28, ATP NE16 and ATP TE29.

This table covers the wear sleeves used to restore a Torque Converter seal surface. Read more

4 Torque Converter Repair Sleeve parts are listed for the 1993 Eagle 2000 GTX, from BCA, NATIONAL, SCHAEFFLER and 1 other brand.

This group includes BCA NS99157, NATIONAL 99157 and SCHAEFFLER SR3483 and the remaining parts above.

This table covers the seals at the Torque Converter Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Torque Converter Shaft Seal parts are listed for the 1993 Eagle 2000 GTX, from BCA, NATIONAL, SCHAEFFLER and 1 other brand.

Part numbers include BCA NS320583, NATIONAL 320583 and SCHAEFFLER SS3759, among others listed above.

This table covers the Transfer Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

4 Transfer Shaft Bearing parts are listed for the 1993 Eagle 2000 GTX, from SCHAEFFLER and BCA.

Listed part numbers: BCA NBA35, SCHAEFFLER KLM501349 and SCHAEFFLER KT45, plus the other parts above.

This table covers the automatic-transmission fluids specified for this gearbox. Typical signs include harsh or delayed shifts, fluid that smells burnt, or a shudder at light throttle. Use exactly the specification in the notes. Automatic transmissions are unforgiving of the wrong fluid. Read more

3 Transmission Fluid parts for the 1993 Eagle 2000 GTX come from VALVOLINE.

Part numbers include VALVOLINE VV3246, VALVOLINE 773775 and VALVOLINE 881051.

This table covers the conditioners and additives used with this transmission fluid. Read more

3 Transmission Fluid Additive parts for the 1993 Eagle 2000 GTX come from LUBEGARD.

Listed part numbers: LUBEGARD 61910, LUBEGARD 61904 and LUBEGARD 61955.

This table covers the mounts that hold the transmission to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

One part is listed for the 1993 Eagle 2000 GTX — DEA / MARMON RIDE CONTROL A6693.