1993 Eagle 2000 GTX Engine Parts

This table covers the Balance Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

One part is listed for the 1993 Eagle 2000 GTX — SEALED POWER 1810M.

This table covers the Balance Shaft belts. Typical signs include squeal on cold start, cracked ribs, or glazing. Spin the tensioner and idlers by hand while the belt is off. Read more

5 Balance Shaft Belt parts for the 1993 Eagle 2000 GTX come from 5 brands — GATES, ACDELCO, BANDO and 2 other brands. The "Popular" part is GATES T168.

Listed part numbers: GATES T168 and ACDELCO TB168, plus the other parts above.

This table covers the Balance Shaft Belt tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

2 Balance Shaft Belt Tensioner parts are listed for the 1993 Eagle 2000 GTX, from GATES and GMB.

Listed part numbers: GATES T41047 and GMB 4481070.

This table covers the wear sleeves used to restore a Balance Shaft seal surface. Read more

3 Balance Shaft Repair Sleeve parts for the 1993 Eagle 2000 GTX come from 3 brands — NATIONAL, SKF and WJB / INMOTION PARTS.

This group includes NATIONAL 99098 and WJB / INMOTION PARTS WS99098 and the remaining parts above.

This table covers the seals at the Balance Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

5 Balance Shaft Seal parts for the 1993 Eagle 2000 GTX come from 5 brands — NATIONAL, BCA, JAPANESE OE and 2 other brands. The "Popular" part is NATIONAL 712007.

This group includes NATIONAL 712007, BCA NS712007 and JAPANESE OE KJ413209 and the remaining parts above.

This table covers the wear sleeves used to restore a Camshaft seal surface. Read more

4 Camshaft Repair Sleeve parts are listed for the 1993 Eagle 2000 GTX, from BCA, NATIONAL, SKF and 1 other brand.

This group includes BCA NS99139 and NATIONAL 99139 and the remaining parts above.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

8 Camshaft Seal parts are listed for the 1993 Eagle 2000 GTX, from FEL-PRO, NATIONAL, AJUSA and 5 other brands. FEL-PRO TCS45483 carries the "Popular" badge.

Listed part numbers: FEL-PRO TCS45483, NATIONAL 3771 and AJUSA 15013300, plus the other parts above.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

This group shows a single part: SEALED POWER 43485CP.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

2 Conversion / Lower Gasket Set parts for the 1993 Eagle 2000 GTX come from 2 brands — AJUSA and FEL-PRO.

This group includes AJUSA 54073000 and FEL-PRO CS90861.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

One part is listed for the 1993 Eagle 2000 GTX — SEALED POWER 5103M.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

3 Crankshaft Repair Sleeve parts are listed for the 1993 Eagle 2000 GTX, from FEL-PRO, MAHLE / CLEVITE and SKF.

This group includes FEL-PRO 16275, MAHLE / CLEVITE A354 and SKF 99312.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

12 Crankshaft Seal parts are listed for the 1993 Eagle 2000 GTX, from AJUSA, NATIONAL, WJB / INMOTION PARTS and 6 other brands. AJUSA 15052700 carries the "Popular" badge.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Cylinder Head Gasket parts for the 1993 Eagle 2000 GTX come from 3 brands — FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.

Listed part numbers: FEL-PRO 9932PT, MAHLE / CLEVITE 54448 and VICTOR REINZ 615297000.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

4 Cylinder Head Gasket Set parts for the 1993 Eagle 2000 GTX come from 4 brands — AJUSA, FEL-PRO, MAHLE / CLEVITE and 1 other brand.

Listed part numbers: AJUSA 52125500, FEL-PRO HS9932PT and MAHLE / CLEVITE HS54119, plus the other parts above.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

This group shows a single part: AJUSA 50139500.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Intake Manifold Gasket parts for the 1993 Eagle 2000 GTX come from 2 brands — AJUSA and FEL-PRO.

Listed part numbers: AJUSA 13107000 and FEL-PRO MS95471.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

DEA / MARMON RIDE CONTROL supplies the 4 Motor Mount parts for the 1993 Eagle 2000 GTX.

Part numbers include DEA / MARMON RIDE CONTROL A6142, DEA / MARMON RIDE CONTROL A6610 and DEA / MARMON RIDE CONTROL A6609, among others listed above.

This table covers the Motor Mount bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

One part is listed for the 1993 Eagle 2000 GTX — DEA / MARMON RIDE CONTROL A6142in.

This table covers the Oil Cooler Mounting kits. Read more

2 Oil Cooler Mounting Kit parts for the 1993 Eagle 2000 GTX come from HAYDEN.

This group includes HAYDEN 238 and HAYDEN 153.

This table covers the drain plugs in the oil pan. Read more

5 Oil Drain Plug parts are listed for the 1993 Eagle 2000 GTX, from DORMAN, AGS and SKP. DORMAN 090053 carries the "Popular" badge.

Part numbers include DORMAN 090053, AGS ODP00007 and DORMAN 090075, among others listed above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: AJUSA 18001000.

This table covers the caps on the oil filler neck. Read more

2 Oil Filler Cap parts are listed for the 1993 Eagle 2000 GTX, from ACDELCO and MOTORAD.

This group includes ACDELCO 12C36 and MOTORAD MO88.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

7 Oil Filter parts are listed for the 1993 Eagle 2000 GTX, from CHAMP / LUBER-FINER, PRO-TEC, VARIOUS MFR and 4 other brands. BOSCH 3421 carries the "Popular" badge.

In the Economy grade, CHAMP / LUBER-FINER, PRO-TEC and VARIOUS MFR supply 3 parts: the catalog's value-priced group. A representative part number is CHAMP / LUBER-FINER PH2856A.

The Standard Replacement section lists 4 options from BOSCH, WIX, FRAM and 1 other brand — built to original-equipment specification. BOSCH 3421 is listed in this group.

This group includes BOSCH 3421, CHAMP / LUBER-FINER PH2856A and PRO-TEC PXL51381 and the remaining parts above.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Oil Pan Gasket parts are listed for the 1993 Eagle 2000 GTX, from AJUSA, FEL-PRO, MAHLE / CLEVITE and 1 other brand.

Part numbers include AJUSA 14069900, FEL-PRO OS30665C and MAHLE / CLEVITE OS32120, among others listed above.

This table covers the wear sleeves used to restore a Oil Pump seal surface. Read more

This group shows a single part: WJB / INMOTION PARTS WS99078.

This table covers the seals at the Oil Pump. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Oil Pump Seal parts for the 1993 Eagle 2000 GTX come from 4 brands — BCA, NATIONAL, SCHAEFFLER and 1 other brand.

This group includes BCA NS222025, NATIONAL 222025 and SCHAEFFLER SS3984 and the remaining parts above.

This table covers the rings that seal each piston to the cylinder wall. Read more

This group shows a single part: MAHLE / CLEVITE 41692.

This table covers the Timing belts. Typical signs include squeal on cold start, cracked ribs, or glazing. Spin the tensioner and idlers by hand while the belt is off. Read more

7 Timing Belt parts for the 1993 Eagle 2000 GTX come from 4 brands — GATES, ACDELCO, BANDO and 1 other brand. The "Popular" part is GATES T167.

The High Performance section lists 1 option from GATES — engineered beyond original-equipment specification. GATES T167RB is listed in this group.

Standard Replacement: 6 parts, from GATES, ACDELCO, BANDO and 1 other brand. A representative part number is GATES T167.

Part numbers include GATES T167, GATES T167RB and GATES T232, among others listed above.

This table covers the Timing Belt & component kits. Read more

GMB supplies both parts for the 1993 Eagle 2000 GTX.

This group includes GMB 34481167 and GMB 24480155.

This table covers the Timing Belt pulleys. Typical signs include a growl or chirp that follows engine speed, or a pulley that will not spin freely by hand. Spin each pulley with the belt off. Roughness or play means replace it with the belt. Read more

4 Timing Belt Pulley parts are listed for the 1993 Eagle 2000 GTX, from GATES, ACDELCO and GMB.

Listed part numbers: ACDELCO T41054 and GATES T41046, plus the other parts above.

This table covers the Timing Belt tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

5 Timing Belt Tensioner parts are listed for the 1993 Eagle 2000 GTX, from GATES, GMB, ACDELCO and 1 other brand. GMB 4484697 carries the "Popular" badge.

Part numbers include GMB 4484697 and ACDELCO T43215, among others listed above.

This table covers the gaskets that seal the Timing Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 1993 Eagle 2000 GTX — FEL-PRO TCS45941.

This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 1993 Eagle 2000 GTX — SKF 17629.

This table covers the Timing idlers. Typical signs include a chirp that follows engine speed, or an idler that feels rough or has play. Replace a noisy idler with the belt — the labor is already paid for. Read more

4 Timing Idler parts are listed for the 1993 Eagle 2000 GTX, from ACDELCO, GATES, GMB and 1 other brand.

Part numbers include ACDELCO T42017 and GMB 4481050, among others listed above.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Valve Cover Gasket parts are listed for the 1993 Eagle 2000 GTX, from AJUSA, FEL-PRO, MAHLE / CLEVITE and 1 other brand.

Part numbers include AJUSA 56013600, FEL-PRO VS50435R and MAHLE / CLEVITE VS50267, among others listed above.

This table covers the lifters / tappets that transfer cam motion to the valves. Read more

2 Valve Lifter parts are listed for the 1993 Eagle 2000 GTX, from AJUSA and MELLING.

This group includes AJUSA 85004400 and MELLING JB2250.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Valve Stem Seal parts are listed for the 1993 Eagle 2000 GTX, from AJUSA, FEL-PRO and VICTOR REINZ.

Part numbers include AJUSA 12007900, AJUSA 57016600 and FEL-PRO SS70660, among others listed above.