11 Steering parts are listed for the 1965 Excalibur Phaeton, in 3 part types, covering both the 4.7L 289cid V8 and the 5.3L 327cid V8. Each one has a brand, a manufacturer part number and notes that say where it fits.
On the 1965 Excalibur Phaeton, the steering system connects driver to road through the rack, pump, tie rods, and column components. All 11 listed parts are Power Steering Fluid (4 parts), Power Steering Pump Shaft Bearing (4 parts) and Power Steering Pump Shaft Seal (3 parts).
The 1965 Excalibur Phaeton was sold with both the 4.7L 289cid V8 and the 5.3L 327cid V8. Every part on this page is engine-specific. Each part shows which engine(s) it fits.
5 brands supply steering parts for the 1965 Excalibur Phaeton, led by LUBEGARD (4 parts), WJB / INMOTION PARTS (2 parts) and BCA (2 parts), plus 2 more brands. Quality grades include Standard Replacement and Economy.
Each part number listed for the 1965 Excalibur Phaeton opens a page with every vehicle that part fits.
Power Steering Fluid
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| LUBEGARD Fits: 4.7L 289cid V8 | 23201 | 🇺🇸 US | 1 QuartSynthetic Power Steering Fluid | View on Amazon |
| LUBEGARD Fits: 4.7L 289cid V8 | 23205 | 🇺🇸 US | 5 GallonSynthetic Power Steering Fluid | View on Amazon |
| LUBEGARD Fits: 4.7L 289cid V8 | 23232 | 🇺🇸 US | Synthetic Power Steering Fluid1 Quart | View on Amazon |
| LUBEGARD Fits: 4.7L 289cid V8 | 23255 | 🇺🇸 US | 55 GallonSynthetic Power Steering Fluid | View on Amazon |
This table covers the fluids specified for this steering system. Typical signs include discolored fluid, a burnt smell, or a level that keeps dropping. Use only the specification in the notes — the tables group grades because they are not interchangeable.
4 Power Steering Fluid parts for the 1965 Excalibur Phaeton come from LUBEGARD.
Part numbers include LUBEGARD 23201, LUBEGARD 23205 and LUBEGARD 23232, among others listed above.
Power Steering Pump Shaft Bearing
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| WJB / INMOTION PARTS Fits: 4.7L 289cid V8 | RB62032RS | 🇺🇸 US | Eaton | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ACDELCO Fits: 4.7L 289cid V8 | 203FF | 🇺🇸 US 🇨🇦 CA | Gold | View on Amazon |
| BCA Fits: 4.7L 289cid V8 | NB203FF | 🇺🇸 US | with Eaton Pump | View on Amazon |
| NATIONAL Fits: 4.7L 289cid V8 | 203FF | 🇺🇸 US | Eaton | View on Amazon |
This table covers the Power Steering Pump Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.
4 Power Steering Pump Shaft Bearing parts for the 1965 Excalibur Phaeton come from 4 brands — WJB / INMOTION PARTS, ACDELCO, BCA and 1 other brand.
The Economy section lists 1 option from WJB / INMOTION PARTS — the catalog's value-priced group. WJB / INMOTION PARTS RB62032RS is listed in this group.
In the Standard Replacement grade, ACDELCO, BCA and NATIONAL supply 3 parts: built to original-equipment specification. A representative part number is ACDELCO 203FF.
Part numbers include WJB / INMOTION PARTS RB62032RS, ACDELCO 203FF and BCA NB203FF, among others listed above.
Power Steering Pump Shaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BCA Fits: 4.7L 289cid V8 | NS6835S | 🇺🇸 US | View on Amazon | |
| NATIONAL Fits: 4.7L 289cid V8 | 6835S | 🇺🇸 US | with Eaton Pump | View on Amazon |
| WJB / INMOTION PARTS Fits: 4.7L 289cid V8 | WS6835S | 🇺🇸 US | with Eaton Pump | View on Amazon |
This table covers the seals at the Power Steering Pump Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
3 Power Steering Pump Shaft Seal parts are listed for the 1965 Excalibur Phaeton, from BCA, NATIONAL and WJB / INMOTION PARTS.
This group includes BCA NS6835S, NATIONAL 6835S and WJB / INMOTION PARTS WS6835S.
Buying Steering Parts for a 1965 Excalibur Phaeton
On this vehicle, the steering system connects driver to road through the rack, pump, tie rods, and column components.
- Match the engine first. Every steering part here is engine-specific; each row shows which engine(s) it fits.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the inner and outer tie-rod ends together on higher-mileage vehicles, then get an alignment.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Power Steering Fluid and Power Steering Pump Shaft Bearing .
Frequently Asked Questions
How many steering parts fit the 1965 Excalibur Phaeton?
Our catalog currently lists 11 steering parts for the 1965 Excalibur Phaeton across 3 subcategories and 5 brands, covering both the 4.7L 289cid V8 and the 5.3L 327cid V8. Each part is matched to the engine(s) it fits.
Do steering parts differ between 1965 Excalibur Phaeton engines?
Yes. Every steering part on this page is engine-specific. Each row shows which engine(s) it fits — use the filter at the top to hide the rest. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.
What are the signs of steering problems on a 1965 Excalibur Phaeton?
Common symptoms include play or looseness on center, a whine when turning, fluid weeping from rack boots, or uneven tire wear on the front axle. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace the inner and outer tie-rod ends together on higher-mileage vehicles, then get an alignment.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1965 Excalibur Phaeton was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 1965 Excalibur Phaeton?
First match the engine — each row shows which engine(s) the part fits. Then flush old power-steering fluid when replacing a pump or rack — grit in the old fluid is the number-one cause of repeat failure. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 1965 Excalibur Phaeton
Steering Parts for Other Excalibur Phaeton Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.