1988 Excalibur Phaeton Engine Parts

This table covers the Bolt kits. Read more

ARP supplies the 4 Bolt Kit parts for the 1988 Excalibur Phaeton. All of them fit every engine offered in the 1988 Phaeton.

This group includes ARP 5349701, ARP 5349801 and ARP 5349601 and the remaining parts above.

This table covers the Camshaft bolts. Read more

This group shows a single part: ARP 1341001.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

KING ENGINE BEARINGS supplies the 11 Connecting Rod Bearing parts for the 1988 Excalibur Phaeton. KING ENGINE BEARINGS CR807XPN carries the "Popular" badge. All of them fit every engine offered in the 1988 Phaeton.

In the High Performance grade, KING ENGINE BEARINGS supplies 6 parts: engineered beyond original-equipment specification. A representative part number is KING ENGINE BEARINGS CR807XPN.

The Standard Replacement section lists 3 options from KING ENGINE BEARINGS — built to original-equipment specification. KING ENGINE BEARINGS CR807SI is listed in this group.

2 ungrouped parts are not assigned to a grade, with the same engine-level match.

This table covers the Connecting Rod bolts. Read more

2 Connecting Rod Bolt parts for the 1988 Excalibur Phaeton come from ARP. 1 part fits every engine; the other 1 is engine-specific.

This group includes ARP 1346003 and ARP 1346001.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

5 Conversion / Lower Gasket Set parts are listed for the 1988 Excalibur Phaeton, from FEL-PRO, APEX, ENGINE PRO and 2 other brands. FEL-PRO CS8510 carries the "Popular" badge. All of them fit every engine offered in the 1988 Phaeton.

Listed part numbers: FEL-PRO CS8510, APEX ACS3023 and ENGINE PRO 378510, plus the other parts above.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

7 Crankshaft Main Bearing parts for the 1988 Excalibur Phaeton come from KING ENGINE BEARINGS. The "Popular" part is KING ENGINE BEARINGS MB557XP. Every part fits both the 5.0L 305cid V8 and the 5.7L 350cid V8.

The High Performance section: 6 options from KING ENGINE BEARINGS. KING ENGINE BEARINGS MB557XP is listed in this group.

Standard Replacement: 1 part, from KING ENGINE BEARINGS. A representative part number is KING ENGINE BEARINGS MB557SI.

Part numbers include KING ENGINE BEARINGS MB557XP, KING ENGINE BEARINGS MB557HP and KING ENGINE BEARINGS MB557HPX, among others listed above.

This table covers the Crankshaft Main Bearing Cap bolts. Read more

ARP supplies both parts for the 1988 Excalibur Phaeton. All of them fit every engine offered in the 1988 Phaeton.

Listed part numbers: ARP 1345401 and ARP 1345601.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

7 Crankshaft Repair Sleeve parts for the 1988 Excalibur Phaeton come from 6 brands — WJB / INMOTION PARTS, NATIONAL, BCA and 3 other brands. The "Popular" part is NATIONAL 99176. Every part fits both the 5.0L 305cid V8 and the 5.7L 350cid V8.

This group includes NATIONAL 99176, WJB / INMOTION PARTS WS99176 and BCA NS99364 and the remaining parts above.

This table covers the Crankshaft Repair Sleeve tools. This is a service tool, not a wear part — match the application in the notes. Read more

This group shows a single part: VICTOR REINZ 711454000.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

16 Crankshaft Seal parts for the 1988 Excalibur Phaeton come from 7 brands — NATIONAL, WJB / INMOTION PARTS, FEL-PRO and 4 other brands. The "Popular" part is FEL-PRO BS40520. Every part fits both the 5.0L 305cid V8 and the 5.7L 350cid V8.

This table covers the bolts that clamp the cylinder head to the block. Read more

9 Cylinder Head Bolt parts are listed for the 1988 Excalibur Phaeton, from ARP, FEL-PRO, APEX and 2 other brands. ARP 1343601 carries the "Popular" badge. All of them fit every engine offered in the 1988 Phaeton.

This group includes ARP 1343601, FEL-PRO ES72856 and APEX AHB322 and the remaining parts above.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

11 Cylinder Head Gasket parts are listed for the 1988 Excalibur Phaeton, from FEL-PRO, VICTOR REINZ, APEX and 1 other brand. APEX AHG324 carries the "Popular" badge.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

10 Cylinder Head Gasket Set parts are listed for the 1988 Excalibur Phaeton, from FEL-PRO, APEX, MAHLE / CLEVITE and 1 other brand. FEL-PRO HS8510PT4 carries the "Popular" badge.

This table covers the Cylinder Head Spacer shims. Read more

2 Cylinder Head Spacer Shim parts are listed for the 1988 Excalibur Phaeton, from MAHLE / CLEVITE and VICTOR REINZ.

Part numbers include MAHLE / CLEVITE 55138 and VICTOR REINZ 711382900.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

4 Engine Kit Gasket Set parts are listed for the 1988 Excalibur Phaeton, from APEX and ENGINE PRO.

Listed part numbers: APEX AFS3034, APEX AFS3023 and ENGINE PRO 311003, plus the other parts above.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

ENGINE PRO supplies the 4 Harmonic Balancer parts for the 1988 Excalibur Phaeton.

This group includes ENGINE PRO PB2221ST, ENGINE PRO PB1012ST and ENGINE PRO PB2221SS and the remaining parts above.

This table covers the Harmonic Balancer bolts. Read more

4 Harmonic Balancer Bolt parts for the 1988 Excalibur Phaeton come from ARP. Every part fits both the 5.0L 305cid V8 and the 5.7L 350cid V8.

Listed part numbers: ARP 4306801, ARP 2002807 and ARP 1342501, plus the other parts above.

This table covers the wear sleeves used to restore a Harmonic Balancer seal surface. Read more

6 Harmonic Balancer Repair Sleeve parts for the 1988 Excalibur Phaeton come from 5 brands — NATIONAL, MAHLE / CLEVITE, BCA and 2 other brands. The "Popular" part is MAHLE / CLEVITE A228. Every part fits both the 5.0L 305cid V8 and the 5.7L 350cid V8.

This group includes MAHLE / CLEVITE A228, NATIONAL 88176 and BCA NS5000 and the remaining parts above.

This table covers the Intake Manifold bolts. Read more

ARP supplies the 4 Intake Manifold Bolt parts for the 1988 Excalibur Phaeton. All of them fit every engine offered in the 1988 Phaeton.

Part numbers include ARP 1342001, ARP 1342101 and ARP 4342001, among others listed above.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

8 Intake Manifold Gasket parts are listed for the 1988 Excalibur Phaeton, from VICTOR REINZ, FEL-PRO, MAHLE / CLEVITE and 1 other brand. FEL-PRO MS903142 carries the "Popular" badge.

Listed part numbers: FEL-PRO MS903142, FEL-PRO MS93317 and MAHLE / CLEVITE MS15401, plus the other parts above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Oil Drain Plug Gasket parts are listed for the 1988 Excalibur Phaeton, from FEL-PRO and VICTOR REINZ. All of them fit every engine offered in the 1988 Phaeton.

Part numbers include FEL-PRO 70822 and VICTOR REINZ 711346200.

This table covers the Oil Pan bolts. Read more

5 Oil Pan Bolt parts for the 1988 Excalibur Phaeton come from ARP. The "Popular" part is ARP 2341802. Every part fits both the 5.0L 305cid V8 and the 5.7L 350cid V8.

This group includes ARP 2341802, ARP 4341802 and ARP 2341901 and the remaining parts above.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Oil Pan Gasket parts for the 1988 Excalibur Phaeton come from 6 brands — APEX, FEL-PRO, ENGINE PRO and 3 other brands. The "Popular" part is APEX AOP323. 5 parts fit every engine; the other 1 is engine-specific.

Listed part numbers: APEX AOP323, FEL-PRO OS34500R and ENGINE PRO 311886, plus the other parts above.

This table covers the Oil Pump shafts. Read more

This group shows a single part: ARP 1347901.

This table covers the Oil Pump Shaft Guide retainers. Read more

3 Oil Pump Shaft Guide / Retainer parts are listed for the 1988 Excalibur Phaeton, from FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ. All of them fit every engine offered in the 1988 Phaeton.

Part numbers include FEL-PRO 72665, MAHLE / CLEVITE H31354 and VICTOR REINZ 711403800.

This table covers the pistons that travel in each cylinder. Typical signs include knock, blow-by, or a cylinder that will not hold compression. Piston work is a short-block job. Match bore, pin and ring pack in the notes — not the photo. Read more

SILV-O-LITE supplies the 6 Piston parts for the 1988 Excalibur Phaeton. SILV-O-LITE 3437HC carries the "Popular" badge.

The Premium section lists 2 options from SILV-O-LITE — a step above OE specification in materials, tolerances or warranty terms. SILV-O-LITE 3437HC is listed in this group.

The Standard Replacement section: 4 options from SILV-O-LITE. SILV-O-LITE 1479H is listed in this group.

This group includes SILV-O-LITE 3437HC, SILV-O-LITE 3437HCK1 and SILV-O-LITE 1479H and the remaining parts above.

This table covers the Rocker Arm studs. Read more

4 Rocker Arm Stud parts for the 1988 Excalibur Phaeton come from ARP. Every part fits both the 5.0L 305cid V8 and the 5.7L 350cid V8.

This group includes ARP 1347103, ARP 1347104 and ARP 1347101 and the remaining parts above.

This table covers the Timing Camshaft Gear bolts. Read more

One part is listed for the 1988 Excalibur Phaeton — ARP 2341001.

This table covers the gaskets that seal the Timing Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Timing Cover Gasket parts for the 1988 Excalibur Phaeton come from 4 brands — FEL-PRO, VICTOR REINZ, APEX and 1 other brand. The "Popular" part is APEX ATC3221. Every part fits both the 5.0L 305cid V8 and the 5.7L 350cid V8.

This group includes APEX ATC3221, FEL-PRO TCS45121 and FEL-PRO TCS45265 and the remaining parts above.

This table covers the Timing Cover Repair Sleeve tools. This is a service tool, not a wear part — match the application in the notes. Read more

This group shows a single part: FEL-PRO 16312.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

7 Valve Cover Gasket parts for the 1988 Excalibur Phaeton come from 5 brands — FEL-PRO, VICTOR REINZ, APEX and 2 other brands. The "Popular" part is FEL-PRO VS50293R. Every part fits both the 5.0L 305cid V8 and the 5.7L 350cid V8.

Part numbers include FEL-PRO VS50293R, FEL-PRO VS50088R and APEX AVC323S, among others listed above.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

9 Valve Stem Seal parts for the 1988 Excalibur Phaeton come from 4 brands — FEL-PRO, VICTOR REINZ, APEX and 1 other brand. The "Popular" part is FEL-PRO SS5112. Every part fits both the 5.0L 305cid V8 and the 5.7L 350cid V8.

This group includes FEL-PRO SS5112, FEL-PRO SS72527 and APEX AVS3022 and the remaining parts above.