1989 Excalibur Phaeton Engine Parts

This table covers the Bolt kits. Read more

4 Bolt Kit parts for the 1989 Excalibur Phaeton come from ARP. Every part fits both the 5.0L 305cid V8 and the 5.7L 350cid V8.

Part numbers include ARP 5349701, ARP 5349801 and ARP 5349601, among others listed above.

This table covers the Camshaft bolts. Read more

One part is listed for the 1989 Excalibur Phaeton — ARP 1341001.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

11 Connecting Rod Bearing parts for the 1989 Excalibur Phaeton come from KING ENGINE BEARINGS. The "Popular" part is KING ENGINE BEARINGS CR807XPN. Every part fits both the 5.0L 305cid V8 and the 5.7L 350cid V8.

The High Performance section lists 6 options from KING ENGINE BEARINGS — engineered beyond original-equipment specification. KING ENGINE BEARINGS CR807XPN is listed in this group.

In the Standard Replacement grade, KING ENGINE BEARINGS supplies 3 parts: built to original-equipment specification. A representative part number is KING ENGINE BEARINGS CR807SI.

2 further parts sit outside the graded sections, with the same engine-level match.

This table covers the Connecting Rod bolts. Read more

ARP supplies both parts for the 1989 Excalibur Phaeton. 1 part fits every engine; the other 1 is engine-specific.

Part numbers include ARP 1346003 and ARP 1346001.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

5 Conversion / Lower Gasket Set parts for the 1989 Excalibur Phaeton come from 5 brands — FEL-PRO, APEX, ENGINE PRO and 2 other brands. The "Popular" part is FEL-PRO CS8510. 3 parts fit every engine; the other 2 are engine-specific.

Part numbers include FEL-PRO CS8510, APEX ACS3023 and ENGINE PRO 378510, among others listed above.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

KING ENGINE BEARINGS supplies the 7 Crankshaft Main Bearing parts for the 1989 Excalibur Phaeton. KING ENGINE BEARINGS MB557XP carries the "Popular" badge. All of them fit every engine offered in the 1989 Phaeton.

High Performance: 6 parts, from KING ENGINE BEARINGS. A representative part number is KING ENGINE BEARINGS MB557XP.

The Standard Replacement section: 1 option from KING ENGINE BEARINGS. KING ENGINE BEARINGS MB557SI is listed in this group.

This group includes KING ENGINE BEARINGS MB557XP, KING ENGINE BEARINGS MB557HP and KING ENGINE BEARINGS MB557HPX and the remaining parts above.

This table covers the Crankshaft Main Bearing Cap bolts. Read more

2 Crankshaft Main Bearing Cap Bolt parts for the 1989 Excalibur Phaeton come from ARP. Every part fits both the 5.0L 305cid V8 and the 5.7L 350cid V8.

This group includes ARP 1345401 and ARP 1345601.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

7 Crankshaft Repair Sleeve parts are listed for the 1989 Excalibur Phaeton, from WJB / INMOTION PARTS, NATIONAL, BCA and 3 other brands. NATIONAL 99176 carries the "Popular" badge. 6 parts fit every engine; the other 1 is engine-specific.

This group includes NATIONAL 99176, WJB / INMOTION PARTS WS99176 and BCA NS99364 and the remaining parts above.

This table covers the Crankshaft Repair Sleeve tools. This is a service tool, not a wear part — match the application in the notes. Read more

One part is listed for the 1989 Excalibur Phaeton — VICTOR REINZ 711454000.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

16 Crankshaft Seal parts are listed for the 1989 Excalibur Phaeton, from NATIONAL, WJB / INMOTION PARTS, FEL-PRO and 4 other brands. APEX ABS323 carries the "Popular" badge. 14 parts fit every engine; the other 2 are engine-specific.

This table covers the bolts that clamp the cylinder head to the block. Read more

9 Cylinder Head Bolt parts for the 1989 Excalibur Phaeton come from 5 brands — ARP, APEX, FEL-PRO and 2 other brands. The "Popular" part is APEX AHB322. 8 parts fit every engine; the other 1 is engine-specific.

Part numbers include APEX AHB322, ARP 1343601 and FEL-PRO ES72856, among others listed above.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

10 Cylinder Head Gasket parts for the 1989 Excalibur Phaeton come from 5 brands — VICTOR REINZ, APEX, FEL-PRO and 2 other brands. The "Popular" part is APEX AHG324.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

8 Cylinder Head Gasket Set parts for the 1989 Excalibur Phaeton come from 4 brands — FEL-PRO, APEX, MAHLE / CLEVITE and 1 other brand. The "Popular" part is FEL-PRO HS8510PT4.

Listed part numbers: FEL-PRO HS8510PT4, APEX AHS3034 and APEX AHS3023, plus the other parts above.

This table covers the Cylinder Head Spacer shims. Read more

2 Cylinder Head Spacer Shim parts for the 1989 Excalibur Phaeton come from 2 brands — MAHLE / CLEVITE and VICTOR REINZ.

Listed part numbers: MAHLE / CLEVITE 55138 and VICTOR REINZ 711382900.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

4 Engine Kit Gasket Set parts for the 1989 Excalibur Phaeton come from 2 brands — APEX and ENGINE PRO.

Part numbers include APEX AFS3034, APEX AFS3023 and ENGINE PRO 311003, among others listed above.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

4 Harmonic Balancer parts for the 1989 Excalibur Phaeton come from ENGINE PRO.

This group includes ENGINE PRO PB2221ST, ENGINE PRO PB1012ST and ENGINE PRO PB2221SS and the remaining parts above.

This table covers the Harmonic Balancer bolts. Read more

ARP supplies the 4 Harmonic Balancer Bolt parts for the 1989 Excalibur Phaeton. All of them fit every engine offered in the 1989 Phaeton.

This group includes ARP 4306801, ARP 2002807 and ARP 1342501 and the remaining parts above.

This table covers the wear sleeves used to restore a Harmonic Balancer seal surface. Read more

6 Harmonic Balancer Repair Sleeve parts are listed for the 1989 Excalibur Phaeton, from NATIONAL, MAHLE / CLEVITE, BCA and 2 other brands. MAHLE / CLEVITE A228 carries the "Popular" badge. 5 parts fit every engine; the other 1 is engine-specific.

Listed part numbers: MAHLE / CLEVITE A228, NATIONAL 88176 and BCA NS5000, plus the other parts above.

This table covers the Intake Manifold bolts. Read more

4 Intake Manifold Bolt parts for the 1989 Excalibur Phaeton come from ARP. Every part fits both the 5.0L 305cid V8 and the 5.7L 350cid V8.

This group includes ARP 1342001, ARP 1342101 and ARP 4342001 and the remaining parts above.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Intake Manifold Gasket parts for the 1989 Excalibur Phaeton come from 4 brands — FEL-PRO, MAHLE / CLEVITE, ULTRA-POWER and 1 other brand. 1 part fits every engine; the other 3 are engine-specific.

This group includes FEL-PRO MS93317 and MAHLE / CLEVITE MS15401 and the remaining parts above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Oil Drain Plug Gasket parts for the 1989 Excalibur Phaeton come from 2 brands — FEL-PRO and VICTOR REINZ. 1 part fits every engine; the other 1 is engine-specific.

Listed part numbers: FEL-PRO 70822 and VICTOR REINZ 711346200.

This table covers the Oil Pan bolts. Read more

ARP supplies the 5 Oil Pan Bolt parts for the 1989 Excalibur Phaeton. ARP 2341802 carries the "Popular" badge. All of them fit every engine offered in the 1989 Phaeton.

Part numbers include ARP 2341802, ARP 4341802 and ARP 2341901, among others listed above.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Oil Pan Gasket parts are listed for the 1989 Excalibur Phaeton, from APEX, FEL-PRO, ENGINE PRO and 3 other brands. APEX AOP323 carries the "Popular" badge. 3 parts fit every engine; the other 3 are engine-specific.

This group includes APEX AOP323, FEL-PRO OS34500R and ENGINE PRO 311886 and the remaining parts above.

This table covers the Oil Pump shafts. Read more

One part is listed for the 1989 Excalibur Phaeton — ARP 1347901.

This table covers the Oil Pump Shaft Guide retainers. Read more

3 Oil Pump Shaft Guide / Retainer parts for the 1989 Excalibur Phaeton come from 3 brands — FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ. 2 parts fit every engine; the other 1 is engine-specific.

This group includes FEL-PRO 72665, MAHLE / CLEVITE H31354 and VICTOR REINZ 711403800.

This table covers the pistons that travel in each cylinder. Typical signs include knock, blow-by, or a cylinder that will not hold compression. Piston work is a short-block job. Match bore, pin and ring pack in the notes — not the photo. Read more

6 Piston parts for the 1989 Excalibur Phaeton come from SILV-O-LITE. The "Popular" part is SILV-O-LITE 3437HC.

In the Premium grade, SILV-O-LITE supplies 2 parts: a step above OE specification in materials, tolerances or warranty terms. A representative part number is SILV-O-LITE 3437HC.

Standard Replacement: 4 parts, from SILV-O-LITE. A representative part number is SILV-O-LITE 1479H.

This group includes SILV-O-LITE 3437HC, SILV-O-LITE 3437HCK1 and SILV-O-LITE 1479H and the remaining parts above.

This table covers the Rocker Arm studs. Read more

ARP supplies the 4 Rocker Arm Stud parts for the 1989 Excalibur Phaeton. All of them fit every engine offered in the 1989 Phaeton.

Part numbers include ARP 1347103, ARP 1347104 and ARP 1347101, among others listed above.

This table covers the Timing Camshaft Gear bolts. Read more

This group shows a single part: ARP 2341001.

This table covers the gaskets that seal the Timing Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Timing Cover Gasket parts are listed for the 1989 Excalibur Phaeton, from FEL-PRO, VICTOR REINZ, APEX and 1 other brand. APEX ATC3221 carries the "Popular" badge. 4 parts fit every engine; the other 2 are engine-specific.

Listed part numbers: APEX ATC3221, FEL-PRO TCS45121 and FEL-PRO TCS45265, plus the other parts above.

This table covers the Timing Cover Repair Sleeve tools. This is a service tool, not a wear part — match the application in the notes. Read more

One part is listed for the 1989 Excalibur Phaeton — FEL-PRO 16312.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

8 Valve Cover Gasket parts are listed for the 1989 Excalibur Phaeton, from APEX, FEL-PRO, VICTOR REINZ and 2 other brands. APEX AVC323S carries the "Popular" badge. 4 parts fit every engine; the other 4 are engine-specific.

This group includes APEX AVC323S, FEL-PRO VS50293R and FEL-PRO VS50088R and the remaining parts above.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

9 Valve Stem Seal parts are listed for the 1989 Excalibur Phaeton, from FEL-PRO, VICTOR REINZ, APEX and 1 other brand. FEL-PRO SS5112 carries the "Popular" badge. 3 parts fit every engine; the other 6 are engine-specific.

Listed part numbers: FEL-PRO SS5112, FEL-PRO SS72527 and APEX AVS3022, plus the other parts above.