1966 Fargo W200 Pickup Ignition Parts

Engine:
3.7L 225cid L6

14 Ignition parts are listed for the 1966 Fargo W200 Pickup, in 3 part types, covering the 3.7L 225cid L6 engine. Each one has a brand, a manufacturer part number and notes that say where it fits.

On the 1966 Fargo W200 Pickup, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules. All 14 listed parts are Ignition Coil (7 parts), Spark Plug (5 parts) and Spark Plug Tube Seal (2 parts).

Ignition Coil

Economy

Brand Part Number Markets Notes Buy
FVP UC12F
🇨🇦 CA
View on
Amazon
HOLSTEIN 2IGC0056
🇨🇦 CA
View on
Amazon
SKP SKUC12
🇨🇦 CA
View on
Amazon
STANDARD MOTOR PRODUCTS UC12T
🇨🇦 CA
T-Series
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
ACDELCO Popular U505
🇺🇸 US 🇨🇦 CA
Professional
View on
Amazon
WELLS Popular 5C1026
🇨🇦 CA
Requires External Resistor: YES
View on
Amazon
STANDARD MOTOR PRODUCTS UC12
🇨🇦 CA
View on
Amazon

This table covers the coils that fire each spark plug. Typical signs include a misfire that follows one cylinder, a snap in damp weather, or a coil that is swollen or cracked. Swap a suspect coil with a neighbor to confirm, then replace boots that tore on the way off.

Spark Plug

Summary: Notes include pre-set gaps of 0.025", 0.026", 0.035" and 0.039". Replacement brands in this table include CHAMPION, AUTOLITE and ACDELCO.

Copper / Nickel

Brand Part Number Markets Notes Buy
ACDELCO Popular R44XLS
🇺🇸 US 🇨🇦 CA
ProfessionalConventional
Fitment notes — ACDELCO R44XLS
ProfessionalConventionalPre-Set Gap: 0.039"
Original Equipment-Recommended Gap: .035
View on
Amazon
CHAMPION 120
🇨🇦 CA
Copper PlusPre-Set Gap: 0.026"
Fitment notes — CHAMPION 120
Copper PlusPre-Set Gap: 0.026"
OE-Recommended Gap: 0.035"Non-Resistor Plug
View on
Amazon
CHAMPION 123
🇨🇦 CA
Copper PlusPre-Set Gap: 0.025"
Fitment notes — CHAMPION 123
Copper PlusPre-Set Gap: 0.025"
OE-Recommended Gap: 0.035"Resistor Plug
View on
Amazon

Double Platinum (lasts up to 3x longer than Copper / Nickel)

Brand Part Number Markets Notes Buy
AUTOLITE APP65
🇨🇦 CA
Double PlatinumPre-Set Gap: 0.035"
Fitment notes — AUTOLITE APP65
Double PlatinumPre-Set Gap: 0.035"
Gap .035 (In) 0.9 (mm)
View on
Amazon

Platinum (lasts up to 2x longer than Copper / Nickel)

Brand Part Number Markets Notes Buy
AUTOLITE AP65
🇨🇦 CA
Platinum Spark PlugDisplay Pack
Fitment notes — AUTOLITE AP65
Platinum Spark PlugDisplay PackQTY2Pre-Set Gap: 0.035"
Gap .035 (In) 0.9 (mm)
View on
Amazon

This table covers the spark plugs for this engine. Typical signs include misfire under load, rough idle, or a flashing check-engine light. Verify the gap even on pre-gapped plugs, and replace coil boots that come off a high-mileage engine.

Spark Plug Tube Seal

Brand Part Number Markets Notes Buy
MAHLE / CLEVITE GS33731
🇨🇦 CA
Spark Plug Tube Seal KitMolded Rubber
Fitment notes — MAHLE / CLEVITE GS33731
Spark Plug Tube Seal KitMolded RubberIncludes 6 Pieces
View on
Amazon
VICTOR REINZ 181000301
🇨🇦 CA
Valve Cover
View on
Amazon

This table covers the seals at the Spark Plug Tube. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Buying Ignition Parts for a 1966 Fargo W200 Pickup

On this vehicle, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules.

  • Confirm you have the 3.7L 225cid L6 engine — every part on this page is matched to it.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Ignition Coil and Spark Plug .

Frequently Asked Questions

How many ignition parts fit the 1966 Fargo W200 Pickup?

Our catalog currently lists 14 ignition parts for the 1966 Fargo W200 Pickup across 3 subcategories and 10 brands, covering the 3.7L 225cid L6 engine. Each part is matched to the engine(s) it fits.

What are the signs of ignition problems on a 1966 Fargo W200 Pickup?

Common symptoms include misfires under load, rough idle, flashing check-engine light, or poor starting in damp weather. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What spark-plug gap is listed for the 1966 Fargo W200 Pickup?

Notes on this page include pre-set gaps of 0.025", 0.026", 0.035" and 0.039". Still verify against spec — even “pre-gapped” plugs should be checked before they go in.

What should I replace at the same time?

Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1966 Fargo W200 Pickup was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 1966 Fargo W200 Pickup?

Every part on this page is matched to the 3.7L 225cid L6 engine. Then gap matters even on “pre-gapped” plugs — verify against spec, and replace coil boots when they come off a high-mileage engine. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 1966 Fargo W200 Pickup

Ignition Parts for Other Fargo W200 Pickup Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.