1967 Fargo A100 Van Engine Parts

This table covers the Camshaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

2 Camshaft Bearing parts for the 1967 Fargo A100 Van come from 2 brands — MAHLE / CLEVITE and SEALED POWER.

Listed part numbers: MAHLE / CLEVITE SH875S and SEALED POWER 1451M.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

16 Connecting Rod Bearing parts for the 1967 Fargo A100 Van come from 4 brands — MAHLE / CLEVITE, ENGINE PRO, KING ENGINE BEARINGS and 1 other brand. The "Popular" part is MAHLE / CLEVITE CB481P.

The High Performance section lists 7 options from MAHLE / CLEVITE, ENGINE PRO and KING ENGINE BEARINGS — engineered beyond original-equipment specification. ENGINE PRO 11481HX is listed in this group.

In the Standard Replacement grade, MAHLE / CLEVITE, SEALED POWER and KING ENGINE BEARINGS supply 9 parts: built to original-equipment specification. A representative part number is MAHLE / CLEVITE CB481P.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

3 Conversion / Lower Gasket Set parts for the 1967 Fargo A100 Van come from 3 brands — FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.

Listed part numbers: FEL-PRO CS8553, MAHLE / CLEVITE CS3536B and VICTOR REINZ 081009701.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

5 Crankshaft Main Bearing parts are listed for the 1967 Fargo A100 Van, from KING ENGINE BEARINGS, MAHLE / CLEVITE and SEALED POWER. MAHLE / CLEVITE MS540P carries the "Popular" badge.

High Performance: 3 parts, from KING ENGINE BEARINGS and MAHLE / CLEVITE. A representative part number is KING ENGINE BEARINGS MB558XPC.

The Standard Replacement section: 2 options from MAHLE / CLEVITE and SEALED POWER. MAHLE / CLEVITE MS540P is listed in this group.

Part numbers include MAHLE / CLEVITE MS540P, KING ENGINE BEARINGS MB558XPC and KING ENGINE BEARINGS MB558XPCX, among others listed above.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

2 Crankshaft Repair Sleeve parts are listed for the 1967 Fargo A100 Van, from NATIONAL and WJB / INMOTION PARTS.

Listed part numbers: NATIONAL 99218 and WJB / INMOTION PARTS WS99218.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

9 Crankshaft Seal parts are listed for the 1967 Fargo A100 Van, from NATIONAL, WJB / INMOTION PARTS, FEL-PRO and 4 other brands. FEL-PRO BS40245 carries the "Popular" badge.

Listed part numbers: FEL-PRO BS40245, NATIONAL 3103 and BCA NS3103, plus the other parts above.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Cylinder Head Gasket parts for the 1967 Fargo A100 Van come from 2 brands — FEL-PRO and VICTOR REINZ. The "Popular" part is FEL-PRO 8553PT.

Listed part numbers: FEL-PRO 8553PT, FEL-PRO 7734PT and FEL-PRO 521SD, plus the other parts above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

6 Cylinder Head Gasket Set parts for the 1967 Fargo A100 Van come from 3 brands — FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ. The "Popular" part is FEL-PRO HS8553PT12.

Part numbers include FEL-PRO HS8553PT12, FEL-PRO HS7734PT and MAHLE / CLEVITE HS3536, among others listed above.

This table covers the Cylinder Head Spacer shims. Read more

This group shows a single part: VICTOR REINZ 711638000.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

7 Engine Kit Gasket Set parts for the 1967 Fargo A100 Van come from 2 brands — FEL-PRO and VICTOR REINZ. The "Popular" part is FEL-PRO 2601154.

Listed part numbers: FEL-PRO 2601154, FEL-PRO FS7734PT2 and FEL-PRO FS8553PT12, plus the other parts above.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

One part is listed for the 1967 Fargo A100 Van — SEALED POWER V1389.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

4 Harmonic Balancer parts for the 1967 Fargo A100 Van come from ENGINE PRO.

This group includes ENGINE PRO PB1004ST, ENGINE PRO PB1108ST and ENGINE PRO PB1108SS and the remaining parts above.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

7 Intake Manifold Gasket parts for the 1967 Fargo A100 Van come from 3 brands — FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ. The "Popular" part is FEL-PRO MS900411.

Part numbers include FEL-PRO MS900411, FEL-PRO MS90109 and FEL-PRO MS9344SH, among others listed above.

This table covers the O-rings that seal this joint. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

One part is listed for the 1967 Fargo A100 Van — VICTOR REINZ 411041400.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Oil Drain Plug Gasket parts for the 1967 Fargo A100 Van come from 2 brands — FEL-PRO and VICTOR REINZ.

Part numbers include FEL-PRO 70822 and VICTOR REINZ 711346200.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

FRAM supplies both parts for the 1967 Fargo A100 Van.

In the High Performance / Heavy Duty grade, FRAM supplies 1 part: grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. A representative part number is FRAM TG8A.

The Standard Replacement section: 1 option from FRAM. FRAM PH8A is listed in this group.

Listed part numbers: FRAM TG8A and FRAM PH8A.

This table covers the Oil Filter Adapter Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

3 Oil Filter Adapter Gasket / O-Ring parts for the 1967 Fargo A100 Van come from 3 brands — FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.

Part numbers include FEL-PRO 415, MAHLE / CLEVITE B31604 and VICTOR REINZ 711347300.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Oil Pan Gasket parts are listed for the 1967 Fargo A100 Van, from FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.

This group includes FEL-PRO OS6566C1, MAHLE / CLEVITE OS30520X and VICTOR REINZ 101015801.

This table covers the gaskets that seal the Oil Pressure Relief Valve. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Oil Pressure Relief Valve Gasket parts for the 1967 Fargo A100 Van come from 2 brands — FEL-PRO and VICTOR REINZ.

Part numbers include FEL-PRO 3122 and VICTOR REINZ 711456300.

This table covers the gaskets that seal the Oil Pump. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: MAHLE / CLEVITE B45558.

This table covers the Piston Pin bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

One part is listed for the 1967 Fargo A100 Van — SEALED POWER 2134Y.

This table covers the rings that seal each piston to the cylinder wall. Read more

8 Piston Ring parts for the 1967 Fargo A100 Van come from 2 brands — HASTINGS MANUFACTURING and SEALED POWER. The "Popular" part is HASTINGS MANUFACTURING 148.

In the Premium grade, HASTINGS MANUFACTURING and SEALED POWER supply 3 parts: a step above OE specification in materials, tolerances or warranty terms. A representative part number is HASTINGS MANUFACTURING 2M148S.

Standard Replacement: 5 parts, from HASTINGS MANUFACTURING and SEALED POWER. A representative part number is HASTINGS MANUFACTURING 148.

Listed part numbers: HASTINGS MANUFACTURING 148, HASTINGS MANUFACTURING 2M148S and HASTINGS MANUFACTURING 2M148, plus the other parts above.

This table covers the pushrods that transfer lifter motion to the rocker arms. Read more

This group shows a single part: SEALED POWER RP3120.

This table covers the gaskets that seal the Timing Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Timing Cover Gasket parts are listed for the 1967 Fargo A100 Van, from FEL-PRO, VICTOR REINZ and MAHLE / CLEVITE. FEL-PRO TCS65631 carries the "Popular" badge.

Part numbers include FEL-PRO TCS65631, FEL-PRO TCS45284 and MAHLE / CLEVITE T27787, among others listed above.

This table covers the wear sleeves used to restore a Timing Cover seal surface. Read more

2 Timing Cover Repair Sleeve parts are listed for the 1967 Fargo A100 Van, from FEL-PRO and VICTOR REINZ.

Listed part numbers: FEL-PRO 16201 and VICTOR REINZ 711454800.

This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 1967 Fargo A100 Van — MAHLE / CLEVITE 64573.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

7 Valve Cover Gasket parts are listed for the 1967 Fargo A100 Van, from MAHLE / CLEVITE, FEL-PRO and VICTOR REINZ. FEL-PRO VS13395 carries the "Popular" badge.

This group includes FEL-PRO VS13395, MAHLE / CLEVITE VS39569 and FEL-PRO VS11828C and the remaining parts above.

This table covers the lifters / tappets that transfer cam motion to the valves. Read more

One part is listed for the 1967 Fargo A100 Van — SEALED POWER AT2084.

This table covers the Valve seats. Read more

This group shows a single part: SEALED POWER 24516872.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

6 Valve Stem Seal parts are listed for the 1967 Fargo A100 Van, from FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ. FEL-PRO SS12764 carries the "Popular" badge.

Part numbers include FEL-PRO SS12764, FEL-PRO SS70014 and FEL-PRO SS70537, among others listed above.