1968 Fargo A100 Van Engine Parts

This table covers the Camshaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

3 Camshaft Bearing parts are listed for the 1968 Fargo A100 Van, from SEALED POWER and MAHLE / CLEVITE.

Listed part numbers: MAHLE / CLEVITE SH875S, SEALED POWER 1454M and SEALED POWER 1451M.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

18 Connecting Rod Bearing parts are listed for the 1968 Fargo A100 Van, from MAHLE / CLEVITE, KING ENGINE BEARINGS, SEALED POWER and 1 other brand. MAHLE / CLEVITE CB481P carries the "Popular" badge.

In the High Performance grade, MAHLE / CLEVITE, ENGINE PRO and KING ENGINE BEARINGS supply 7 parts: engineered beyond original-equipment specification. A representative part number is ENGINE PRO 11481HX.

The Standard Replacement section lists 9 options from MAHLE / CLEVITE, SEALED POWER and KING ENGINE BEARINGS — built to original-equipment specification. MAHLE / CLEVITE CB481P is listed in this group.

2 ungrouped parts are not assigned to a grade, with the same engine-level match.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

3 Conversion / Lower Gasket Set parts are listed for the 1968 Fargo A100 Van, from FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.

This group includes FEL-PRO CS8553, MAHLE / CLEVITE CS3536B and VICTOR REINZ 081009701.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

5 Crankshaft Main Bearing parts for the 1968 Fargo A100 Van come from 3 brands — KING ENGINE BEARINGS, MAHLE / CLEVITE and SEALED POWER. The "Popular" part is MAHLE / CLEVITE MS540P.

The High Performance section: 3 options from KING ENGINE BEARINGS and MAHLE / CLEVITE. KING ENGINE BEARINGS MB558XPC is listed in this group.

Standard Replacement: 2 parts, from MAHLE / CLEVITE and SEALED POWER. A representative part number is MAHLE / CLEVITE MS540P.

Part numbers include MAHLE / CLEVITE MS540P, KING ENGINE BEARINGS MB558XPC and KING ENGINE BEARINGS MB558XPCX, among others listed above.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

3 Crankshaft Repair Sleeve parts for the 1968 Fargo A100 Van come from 2 brands — WJB / INMOTION PARTS and NATIONAL.

This group includes NATIONAL 99218, WJB / INMOTION PARTS WS99226 and WJB / INMOTION PARTS WS99218.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

11 Crankshaft Seal parts for the 1968 Fargo A100 Van come from 7 brands — FEL-PRO, NATIONAL, MAHLE / CLEVITE and 4 other brands. The "Popular" part is FEL-PRO BS40245.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Cylinder Head Gasket parts are listed for the 1968 Fargo A100 Van, from FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.

Listed part numbers: FEL-PRO 7918PT1, FEL-PRO 8553PT and FEL-PRO 521SD, plus the other parts above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

6 Cylinder Head Gasket Set parts are listed for the 1968 Fargo A100 Van, from FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.

Part numbers include FEL-PRO HS7918PT4, FEL-PRO HS8553PT12 and MAHLE / CLEVITE HS1162VE, among others listed above.

This table covers the Cylinder Head Spacer shims. Read more

One part is listed for the 1968 Fargo A100 Van — VICTOR REINZ 711638000.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

10 Engine Kit Gasket Set parts are listed for the 1968 Fargo A100 Van, from FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ. FEL-PRO 2601004 carries the "Popular" badge.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

ENGINE PRO supplies the 4 Harmonic Balancer parts for the 1968 Fargo A100 Van.

Part numbers include ENGINE PRO PB1004ST, ENGINE PRO PB1108ST and ENGINE PRO PB1108SS, among others listed above.

This table covers the wear sleeves used to restore a Harmonic Balancer seal surface. Read more

This group shows a single part: MAHLE / CLEVITE 66593RS.

This table covers the Intake & Exhaust Manifold gasket sets. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

3 Intake & Exhaust Manifold Gasket Set parts are listed for the 1968 Fargo A100 Van, from FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.

Part numbers include FEL-PRO MS9610B1, MAHLE / CLEVITE MS16030 and VICTOR REINZ 711472900.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Intake Manifold Gasket parts are listed for the 1968 Fargo A100 Van, from FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ. FEL-PRO MS900411 carries the "Popular" badge.

Part numbers include FEL-PRO MS900411, FEL-PRO MS90109 and MAHLE / CLEVITE MS15148W, among others listed above.

This table covers the gaskets that seal the Intake to Exhaust. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Intake to Exhaust Gasket parts for the 1968 Fargo A100 Van come from 2 brands — FEL-PRO and VICTOR REINZ.

Part numbers include FEL-PRO 901042 and VICTOR REINZ 711382200.

This table covers the O-rings that seal this joint. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

This group shows a single part: VICTOR REINZ 411041400.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Oil Drain Plug Gasket parts are listed for the 1968 Fargo A100 Van, from FEL-PRO and VICTOR REINZ. All of them fit every engine offered in the 1968 A100 Van.

Listed part numbers: FEL-PRO 70822 and VICTOR REINZ 711346200.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

2 Oil Filter parts for the 1968 Fargo A100 Van come from FRAM. Every part fits all 3 engine options (2.8L 170cid L6, 3.7L 225cid L6 and 5.2L 318cid V8).

The High Performance / Heavy Duty section lists 1 option from FRAM — grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. FRAM TG8A is listed in this group.

Standard Replacement: 1 part, from FRAM. A representative part number is FRAM PH8A.

Listed part numbers: FRAM TG8A and FRAM PH8A.

This table covers the Oil Filter Adapter Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

3 Oil Filter Adapter Gasket / O-Ring parts are listed for the 1968 Fargo A100 Van, from FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.

This group includes FEL-PRO 415, MAHLE / CLEVITE B31604 and VICTOR REINZ 711347300.

This table covers the gaskets that seal the Oil Filter. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Oil Filter Gasket parts are listed for the 1968 Fargo A100 Van, from FEL-PRO and VICTOR REINZ.

Part numbers include FEL-PRO 70078 and VICTOR REINZ 711462500.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Oil Pan Gasket parts for the 1968 Fargo A100 Van come from 3 brands — FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.

Listed part numbers: FEL-PRO OS12705C1, FEL-PRO OS6566C1 and MAHLE / CLEVITE OS30920X, plus the other parts above.

This table covers the gaskets that seal the Oil Pressure Relief Valve. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Oil Pressure Relief Valve Gasket parts are listed for the 1968 Fargo A100 Van, from FEL-PRO and VICTOR REINZ. All of them fit every engine offered in the 1968 A100 Van.

Part numbers include FEL-PRO 3122 and VICTOR REINZ 711456300.

This table covers the gaskets that seal the Oil Pump. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Oil Pump Gasket parts are listed for the 1968 Fargo A100 Van, from MAHLE / CLEVITE and VICTOR REINZ.

Listed part numbers: MAHLE / CLEVITE B45558 and VICTOR REINZ 711450000.

This table covers the pistons that travel in each cylinder. Typical signs include knock, blow-by, or a cylinder that will not hold compression. Piston work is a short-block job. Match bore, pin and ring pack in the notes — not the photo. Read more

One part is listed for the 1968 Fargo A100 Van — SEALED POWER 244NP.

This table covers the Piston Pin bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

This group shows a single part: SEALED POWER 2134Y.

This table covers the rings that seal each piston to the cylinder wall. Read more

5 Piston Ring parts are listed for the 1968 Fargo A100 Van, from HASTINGS MANUFACTURING and SEALED POWER. HASTINGS MANUFACTURING 687 carries the "Popular" badge.

The Premium section lists 1 option from HASTINGS MANUFACTURING — a step above OE specification in materials, tolerances or warranty terms. HASTINGS MANUFACTURING 2M687 is listed in this group.

The Standard Replacement section: 4 options from HASTINGS MANUFACTURING and SEALED POWER. HASTINGS MANUFACTURING 687 is listed in this group.

This group includes HASTINGS MANUFACTURING 687, HASTINGS MANUFACTURING 2M687 and HASTINGS MANUFACTURING 2C687S and the remaining parts above.

This table covers the pushrods that transfer lifter motion to the rocker arms. Read more

2 Push Rod parts are listed for the 1968 Fargo A100 Van, from MAHLE / CLEVITE and SEALED POWER.

This group includes MAHLE / CLEVITE 2154111 and SEALED POWER RP3120.

This table covers the gaskets that seal the Timing Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

8 Timing Cover Gasket parts for the 1968 Fargo A100 Van come from 3 brands — FEL-PRO, VICTOR REINZ and MAHLE / CLEVITE. The "Popular" part is FEL-PRO TCS65631.

Part numbers include FEL-PRO TCS65631, FEL-PRO TCS127691 and FEL-PRO TCS45284, among others listed above.

This table covers the wear sleeves used to restore a Timing Cover seal surface. Read more

2 Timing Cover Repair Sleeve parts for the 1968 Fargo A100 Van come from 2 brands — FEL-PRO and VICTOR REINZ.

Part numbers include FEL-PRO 16201 and VICTOR REINZ 711454800.

This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Timing Cover Seal parts for the 1968 Fargo A100 Van come from MAHLE / CLEVITE.

Listed part numbers: MAHLE / CLEVITE 64572 and MAHLE / CLEVITE 64573.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Valve Cover Gasket parts for the 1968 Fargo A100 Van come from 3 brands — FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.

Listed part numbers: FEL-PRO VS12680, MAHLE / CLEVITE VS39745 and VICTOR REINZ 151040001.

This table covers the lifters / tappets that transfer cam motion to the valves. Read more

This group shows a single part: SEALED POWER AT2084.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Valve Stem Seal parts for the 1968 Fargo A100 Van come from 3 brands — VICTOR REINZ, FEL-PRO and MAHLE / CLEVITE.

Listed part numbers: FEL-PRO SS12764, MAHLE / CLEVITE SS45298 and VICTOR REINZ 121007101, plus the other parts above.