1967 Fargo D210 Pickup Engine Parts

This table covers the Camshaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

4 Camshaft Bearing parts for the 1967 Fargo D210 Pickup come from 2 brands — SEALED POWER and MAHLE / CLEVITE.

This group includes MAHLE / CLEVITE SH875S, SEALED POWER 1454M and SEALED POWER 1451M and the remaining parts above.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

26 Connecting Rod Bearing parts for the 1967 Fargo D210 Pickup come from 4 brands — MAHLE / CLEVITE, KING ENGINE BEARINGS, SEALED POWER and 1 other brand. The "Popular" part is MAHLE / CLEVITE CB481P. Grades run from High Performance through Standard Replacement; High Performance is the most populated section, led by KING ENGINE BEARINGS, MAHLE / CLEVITE and ENGINE PRO.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

3 Conversion / Lower Gasket Set parts for the 1967 Fargo D210 Pickup come from 3 brands — FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.

This group includes FEL-PRO CS8553, MAHLE / CLEVITE CS3536B and VICTOR REINZ 081009701.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

9 Crankshaft Main Bearing parts are listed for the 1967 Fargo D210 Pickup, from KING ENGINE BEARINGS, MAHLE / CLEVITE and SEALED POWER. MAHLE / CLEVITE MS540P carries the "Popular" badge.

In the High Performance grade, KING ENGINE BEARINGS and MAHLE / CLEVITE supply 5 parts: engineered beyond original-equipment specification. A representative part number is KING ENGINE BEARINGS MB558XPC.

The Standard Replacement section lists 4 options from SEALED POWER, MAHLE / CLEVITE and KING ENGINE BEARINGS — built to original-equipment specification. MAHLE / CLEVITE MS540P is listed in this group.

Part numbers include MAHLE / CLEVITE MS540P, KING ENGINE BEARINGS MB558XPC and KING ENGINE BEARINGS MB558XPCX, among others listed above.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

4 Crankshaft Repair Sleeve parts are listed for the 1967 Fargo D210 Pickup, from WJB / INMOTION PARTS, NATIONAL and SCHAEFFLER.

Part numbers include NATIONAL 99218, SCHAEFFLER SR3515 and WJB / INMOTION PARTS WS99226, among others listed above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

12 Crankshaft Seal parts are listed for the 1967 Fargo D210 Pickup, from MAHLE / CLEVITE, FEL-PRO, NATIONAL and 4 other brands. FEL-PRO BS40245 carries the "Popular" badge.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

10 Cylinder Head Gasket parts for the 1967 Fargo D210 Pickup come from 3 brands — FEL-PRO, VICTOR REINZ and MAHLE / CLEVITE. The "Popular" part is FEL-PRO 8553PT.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

12 Cylinder Head Gasket Set parts for the 1967 Fargo D210 Pickup come from 3 brands — FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ. The "Popular" part is FEL-PRO HS8553PT12.

This table covers the Cylinder Head Spacer shims. Read more

2 Cylinder Head Spacer Shim parts for the 1967 Fargo D210 Pickup come from VICTOR REINZ.

This group includes VICTOR REINZ 711638000 and VICTOR REINZ 711638300.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

17 Engine Kit Gasket Set parts for the 1967 Fargo D210 Pickup come from 4 brands — FEL-PRO, VICTOR REINZ, MAHLE / CLEVITE and 1 other brand. The "Popular" part is FEL-PRO 2601004.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

One part is listed for the 1967 Fargo D210 Pickup — SEALED POWER V1389.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

4 Harmonic Balancer parts for the 1967 Fargo D210 Pickup come from ENGINE PRO.

Part numbers include ENGINE PRO PB1004ST, ENGINE PRO PB1108ST and ENGINE PRO PB1108SS, among others listed above.

This table covers the wear sleeves used to restore a Harmonic Balancer seal surface. Read more

One part is listed for the 1967 Fargo D210 Pickup — MAHLE / CLEVITE 66593RS.

This table covers the Intake & Exhaust Manifold gasket sets. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

3 Intake & Exhaust Manifold Gasket Set parts for the 1967 Fargo D210 Pickup come from 3 brands — FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.

This group includes FEL-PRO MS9610B1, MAHLE / CLEVITE MS16030 and VICTOR REINZ 711472900.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

12 Intake Manifold Gasket parts for the 1967 Fargo D210 Pickup come from 3 brands — FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ. The "Popular" part is FEL-PRO MS900411.

This table covers the gaskets that seal the Intake to Exhaust. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Intake to Exhaust Gasket parts are listed for the 1967 Fargo D210 Pickup, from FEL-PRO and VICTOR REINZ.

Listed part numbers: FEL-PRO 901042 and VICTOR REINZ 711382200.

This table covers the O-rings that seal this joint. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

One part is listed for the 1967 Fargo D210 Pickup — VICTOR REINZ 411041400.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Oil Drain Plug Gasket parts for the 1967 Fargo D210 Pickup come from 2 brands — FEL-PRO and VICTOR REINZ. Every part fits all 3 engine options (3.7L 225cid L6, 5.2L 318cid V8 and 6.3L 383cid V8).

Listed part numbers: FEL-PRO 70822 and VICTOR REINZ 711346200.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

FRAM supplies the 3 Oil Filter parts for the 1967 Fargo D210 Pickup. 2 parts fit every engine; the other 1 is engine-specific.

In the High Performance / Heavy Duty grade, FRAM supplies 1 part: grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. A representative part number is FRAM TG8A.

The Standard Replacement section: 2 options from FRAM. FRAM PH8A is listed in this group.

Part numbers include FRAM TG8A, FRAM PH8A and FRAM CH8PL.

This table covers the Oil Filter Adapter Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

3 Oil Filter Adapter Gasket / O-Ring parts for the 1967 Fargo D210 Pickup come from 3 brands — FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.

This group includes FEL-PRO 415, MAHLE / CLEVITE B31604 and VICTOR REINZ 711347300.

This table covers the gaskets that seal the Oil Filter. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Oil Filter Gasket parts for the 1967 Fargo D210 Pickup come from 2 brands — FEL-PRO and VICTOR REINZ.

Part numbers include FEL-PRO 70078 and VICTOR REINZ 711462500.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

11 Oil Pan Gasket parts are listed for the 1967 Fargo D210 Pickup, from MAHLE / CLEVITE, FEL-PRO, VICTOR REINZ and 1 other brand. FEL-PRO OS11729C1 carries the "Popular" badge.

This table covers the gaskets that seal the Oil Pressure Relief Valve. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Oil Pressure Relief Valve Gasket parts for the 1967 Fargo D210 Pickup come from 2 brands — FEL-PRO and VICTOR REINZ. Every part fits all 3 engine options (3.7L 225cid L6, 5.2L 318cid V8 and 6.3L 383cid V8).

This group includes FEL-PRO 3122 and VICTOR REINZ 711456300.

This table covers the gaskets that seal the Oil Pump. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Oil Pump Gasket parts for the 1967 Fargo D210 Pickup come from 2 brands — MAHLE / CLEVITE and VICTOR REINZ.

Part numbers include MAHLE / CLEVITE B45558 and VICTOR REINZ 711450000.

This table covers the pistons that travel in each cylinder. Typical signs include knock, blow-by, or a cylinder that will not hold compression. Piston work is a short-block job. Match bore, pin and ring pack in the notes — not the photo. Read more

3 Piston parts for the 1967 Fargo D210 Pickup come from 2 brands — SEALED POWER and SILV-O-LITE.

This group includes SEALED POWER 244NP, SEALED POWER 366AP and SILV-O-LITE 1294.

This table covers the Piston Pin bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

One part is listed for the 1967 Fargo D210 Pickup — SEALED POWER 2134Y.

This table covers the rings that seal each piston to the cylinder wall. Read more

13 Piston Ring parts for the 1967 Fargo D210 Pickup come from 2 brands — HASTINGS MANUFACTURING and SEALED POWER. The "Popular" part is HASTINGS MANUFACTURING 687.

In the Premium grade, HASTINGS MANUFACTURING and SEALED POWER supply 4 parts: a step above OE specification in materials, tolerances or warranty terms. A representative part number is HASTINGS MANUFACTURING 2M687.

Standard Replacement: 9 parts, from HASTINGS MANUFACTURING and SEALED POWER. A representative part number is HASTINGS MANUFACTURING 687.

This table covers the pushrods that transfer lifter motion to the rocker arms. Read more

This group shows a single part: SEALED POWER RP3120.

This table covers the gaskets that seal the Timing Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

8 Timing Cover Gasket parts are listed for the 1967 Fargo D210 Pickup, from FEL-PRO, VICTOR REINZ and MAHLE / CLEVITE. FEL-PRO TCS65631 carries the "Popular" badge.

This group includes FEL-PRO TCS65631, FEL-PRO TCS127691 and FEL-PRO TCS45284 and the remaining parts above.

This table covers the wear sleeves used to restore a Timing Cover seal surface. Read more

2 Timing Cover Repair Sleeve parts are listed for the 1967 Fargo D210 Pickup, from FEL-PRO and VICTOR REINZ.

This group includes FEL-PRO 16201 and VICTOR REINZ 711454800.

This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

MAHLE / CLEVITE supplies both parts for the 1967 Fargo D210 Pickup.

Listed part numbers: MAHLE / CLEVITE 64572 and MAHLE / CLEVITE 64573.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

10 Valve Cover Gasket parts are listed for the 1967 Fargo D210 Pickup, from MAHLE / CLEVITE, FEL-PRO and VICTOR REINZ. FEL-PRO VS13395 carries the "Popular" badge.

This table covers the lifters / tappets that transfer cam motion to the valves. Read more

One part is listed for the 1967 Fargo D210 Pickup — SEALED POWER AT2084.

This table covers the Valve seats. Read more

This group shows a single part: SEALED POWER 24516872.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

8 Valve Stem Seal parts are listed for the 1967 Fargo D210 Pickup, from FEL-PRO, VICTOR REINZ and MAHLE / CLEVITE. FEL-PRO SS12764 carries the "Popular" badge.

Part numbers include FEL-PRO SS12764, FEL-PRO SS70014 and FEL-PRO SS70537, among others listed above.