This page lists 13 belt drive parts for the 1968 Fargo D210 Pickup, across 1 part type, covering the 5.2L 318cid V8 engine. Every part shows its brand, manufacturer part number and fitment notes.
The belt drive system on the 1968 Fargo D210 Pickup spins the accessories — serpentine and V-belts, tensioners, idlers and pulleys. Every listed part is a Belt.
The 1968 Fargo D210 Pickup came with a single engine, the 5.2L 318cid V8, and every part is verified against it.
2 brands supply belt drive parts for the 1968 Fargo D210 Pickup, led by GATES (8 parts) and ACDELCO (5 parts). Quality grades include Standard Replacement and Heavy Duty.
A "Popular" badge means the source catalog flagged the part as frequently chosen for the 1968 Fargo D210 Pickup. 3 parts have it, including ACDELCO 15490 (Belt) and GATES 7460 (Belt). Each part number opens a page with every vehicle that part fits.
Belt
Heavy Duty
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GATES | 9470HD | 🇨🇦 CA | Fleet Runner High Capacity V-Belt (Heavy-Duty) | View on Amazon |
| GATES | 9447HD | 🇨🇦 CA | Fleet Runner High Capacity V-Belt (Heavy-Duty) | View on Amazon |
| GATES | 9550HD | 🇨🇦 CA | Fleet Runner High Capacity V-Belt (Heavy-Duty) | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ACDELCO Popular | 15490 | 🇺🇸 US 🇨🇦 CA | Professional / Gold | View on Amazon |
| GATES Popular | 7460 | 🇨🇦 CA | XL High Capacity V-Belt | View on Amazon |
| GATES Popular | 7490 | 🇨🇦 CA | XL High Capacity V-Belt | View on Amazon |
| ACDELCO | 17470 | 🇺🇸 US 🇨🇦 CA | Professional / Gold | View on Amazon |
| ACDELCO | 15460 | 🇺🇸 US 🇨🇦 CA | Professional / Gold | View on Amazon |
| ACDELCO | 17447 | 🇺🇸 US 🇨🇦 CA | Professional / Gold | View on Amazon |
| ACDELCO | 17550 | 🇺🇸 US 🇨🇦 CA | Professional / Gold | View on Amazon |
| GATES | 9470 | 🇨🇦 CA | XL High Capacity V-Belt | View on Amazon |
| GATES | 9447 | 🇨🇦 CA | XL High Capacity V-Belt | View on Amazon |
| GATES | 9550 | 🇨🇦 CA | XL High Capacity V-Belt | View on Amazon |
This table covers the serpentine and accessory belts that drive the front accessories. Typical signs include squeal on cold start, cracks across the ribs, or glazing on the back of the belt. A new belt on a worn tensioner will squeal within weeks — spin the idlers by hand while the belt is off.
13 Belt parts for the 1968 Fargo D210 Pickup come from 2 brands — GATES and ACDELCO. The "Popular" part is ACDELCO 15490.
In the Heavy Duty grade, GATES supplies 3 parts: rated for severe service. A representative part number is GATES 9470HD.
In the Standard Replacement grade, ACDELCO and GATES supply 10 parts: built to original-equipment specification. A representative part number is ACDELCO 15490.
Buying Belt Drive Parts for a 1968 Fargo D210 Pickup
On this vehicle, the belt drive system spins the accessories — serpentine and V-belts, tensioners, idlers and pulleys.
- Confirm you have the 5.2L 318cid V8 engine — every part on this page is matched to it.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the tensioner and idler pulleys with any belt at higher mileage — the labor overlaps almost entirely.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Belt .
Frequently Asked Questions
How many belt drive parts fit the 1968 Fargo D210 Pickup?
Our catalog currently lists 13 belt drive parts for the 1968 Fargo D210 Pickup across 1 subcategory and 2 brands, covering the 5.2L 318cid V8 engine. Each part is matched to the engine(s) it fits.
What are the signs of belt drive problems on a 1968 Fargo D210 Pickup?
Common symptoms include squealing on cold start, a belt that shows cracking or glazing, or an accessory that slows under load. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace the tensioner and idler pulleys with any belt at higher mileage — the labor overlaps almost entirely.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1968 Fargo D210 Pickup was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 1968 Fargo D210 Pickup?
Every part on this page is matched to the 5.2L 318cid V8 engine. Then a new belt on a worn tensioner will squeal within weeks — check tensioner damping and idler bearings while the belt is off. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 1968 Fargo D210 Pickup
Belt Drive Parts for Other Fargo D210 Pickup Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.