1972 Fargo W200 Pickup Drivetrain Parts

This table covers the Axle Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

One part is listed for the 1972 Fargo W200 Pickup — BCA NBRP6408.

This table covers the seals where an axle shaft exits the housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Axle Shaft Seal parts for the 1972 Fargo W200 Pickup come from 3 brands — BCA, NATIONAL and WJB / INMOTION PARTS. Every part fits all 3 engine options (3.7L 225cid L6, 5.2L 318cid V8 and 6.6L 400cid V8).

This group includes BCA NS40769S, NATIONAL 8835S and WJB / INMOTION PARTS WS40769S.

This table covers the bearings and races that support the differential carrier. Read more

14 Differential Carrier Bearing / Race parts for the 1972 Fargo W200 Pickup come from 3 brands — WJB / INMOTION PARTS, BCA and NATIONAL. The "Popular" part is WJB / INMOTION PARTS WT25590. Every part fits all 3 engine options (3.7L 225cid L6, 5.2L 318cid V8 and 6.6L 400cid V8).

The Economy section lists 6 options from WJB / INMOTION PARTS — the catalog's value-priced group. WJB / INMOTION PARTS WT25590 is listed in this group.

In the Standard Replacement grade, BCA and NATIONAL supply 8 parts: built to original-equipment specification. A representative part number is NATIONAL 25523.

This table covers the gaskets that seal the Differential Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

11 Differential Cover Gasket parts for the 1972 Fargo W200 Pickup come from 4 brands — FEL-PRO, VICTOR REINZ, MAHLE / CLEVITE and 1 other brand. The "Popular" part is FEL-PRO RDS6629. Every part fits all 3 engine options (3.7L 225cid L6, 5.2L 318cid V8 and 6.6L 400cid V8).

This table covers the Differential Gear Installation kits. Read more

2 Differential Gear Installation Kit parts are listed for the 1972 Fargo W200 Pickup, from MOTIVE GEAR and RICHMOND. All of them fit every engine offered in the 1972 W200 Pickup.

Listed part numbers: MOTIVE GEAR C875IKL and RICHMOND 831031B.

This table covers the bearings and races on the differential pinion. Read more

34 Differential Pinion Bearing / Race parts are listed for the 1972 Fargo W200 Pickup, from BCA, WJB / INMOTION PARTS, NATIONAL and 1 other brand. WJB / INMOTION PARTS WTM88010 carries the "Popular" badge. They are grouped as Economy and Standard Replacement, with Standard Replacement the largest group at 20 parts from BCA, NATIONAL and MOTIVE GEAR.

This table covers the baffles that control oil at the pinion bearings. Read more

3 Differential Pinion Bearing Baffle parts are listed for the 1972 Fargo W200 Pickup, from RICHMOND and MOTIVE GEAR. All of them fit every engine offered in the 1972 W200 Pickup.

Listed part numbers: MOTIVE GEAR 4102, RICHMOND 0400131 and RICHMOND 040013S.

This table covers the Differential Pinion nuts. Read more

This group shows a single part: MOTIVE GEAR 1260823.

This table covers the wear sleeves used to restore a grooved pinion seal surface. Read more

4 Differential Pinion Repair Sleeve parts for the 1972 Fargo W200 Pickup come from 2 brands — SCHAEFFLER and WJB / INMOTION PARTS. Every part fits all 3 engine options (3.7L 225cid L6, 5.2L 318cid V8 and 6.6L 400cid V8).

This group includes SCHAEFFLER SR3506, SCHAEFFLER SR3481 and WJB / INMOTION PARTS WS99155 and the remaining parts above.

This table covers the seals at the differential pinion yoke. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

11 Differential Pinion Seal parts for the 1972 Fargo W200 Pickup come from 4 brands — WJB / INMOTION PARTS, BCA, SCHAEFFLER and 1 other brand. The "Popular" part is NATIONAL 9316. Every part fits all 3 engine options (3.7L 225cid L6, 5.2L 318cid V8 and 6.6L 400cid V8).

This table covers the Differential Pinion Shaft Lock bolts. Read more

One part is listed for the 1972 Fargo W200 Pickup — MOTIVE GEAR 305105S.

This table covers the Differential Pinion shims. Read more

This group shows a single part: MOTIVE GEAR 1102.

This table covers kits that group the bearings, races and seals for a differential rebuild. Read more

17 Differential Rebuild Kit parts are listed for the 1972 Fargo W200 Pickup, from MOTIVE GEAR, WJB / INMOTION PARTS, RICHMOND and 1 other brand. RICHMOND XL10311 carries the "Popular" badge. All of them fit every engine offered in the 1972 W200 Pickup.

In the Master Kit grade, MOTIVE GEAR, RICHMOND and WJB / INMOTION PARTS supply 8 parts: grouped under the catalog's "Master Kit" designation — the notes column spells out what sets them apart. A representative part number is RICHMOND XL10311.

The Standard Kit section lists 9 options from WJB / INMOTION PARTS, MOTIVE GEAR and NATIONAL — grouped under the catalog's "Standard Kit" designation — the notes column spells out what sets them apart. NATIONAL RA304 is listed in this group.

This table covers the wear sleeves used to restore a Differential seal surface. Read more

One part is listed for the 1972 Fargo W200 Pickup — BCA NS88187.

This table covers the ring-and-pinion gear sets that set the axle ratio. Read more

10 Differential Ring and Pinion parts for the 1972 Fargo W200 Pickup come from 3 brands — DANA, MOTIVE GEAR and RICHMOND. The "Popular" part is DANA 2021412. Every part fits all 3 engine options (3.7L 225cid L6, 5.2L 318cid V8 and 6.6L 400cid V8).

The Economy section: 4 options from DANA. DANA 2021412 is listed in this group.

The High Performance section lists 1 option from MOTIVE GEAR — engineered beyond original-equipment specification. MOTIVE GEAR C887L is listed in this group.

Standard Replacement: 5 parts, from DANA, MOTIVE GEAR and RICHMOND. A representative part number is DANA 2013538.

This table covers the Differential Ring Gear bolts. Read more

This group shows a single part: MOTIVE GEAR 1304.

This table covers the spools that lock the differential side gears together. Read more

One part is listed for the 1972 Fargo W200 Pickup — RICHMOND XL5200.

This table covers the Differential washers. Read more

This group shows a single part: MOTIVE GEAR RGB5LW.

This table covers the Drive Shaft End yokes. Read more

2 Drive Shaft End Yoke parts for the 1972 Fargo W200 Pickup come from RICHMOND. Every part fits all 3 engine options (3.7L 225cid L6, 5.2L 318cid V8 and 6.6L 400cid V8).

Part numbers include RICHMOND 962706 and RICHMOND 962706K.

This table covers the Transfer Case Idler Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

6 Transfer Case Idler Shaft Bearing parts for the 1972 Fargo W200 Pickup come from 3 brands — WJB / INMOTION PARTS, NATIONAL and BCA. The "Popular" part is WJB / INMOTION PARTS WT2720. Every part fits all 3 engine options (3.7L 225cid L6, 5.2L 318cid V8 and 6.6L 400cid V8).

The Economy section: 2 options from WJB / INMOTION PARTS. WJB / INMOTION PARTS WT2720 is listed in this group.

Standard Replacement: 1 part, from NATIONAL. A representative part number is NATIONAL 2720.

3 further parts sit outside the graded sections, with the same engine-level match.

Part numbers include WJB / INMOTION PARTS WT2720, WJB / INMOTION PARTS WT2793 and NATIONAL 2720, among others listed above.

This table covers the Transfer Case Input Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

This group shows a single part: WJB / INMOTION PARTS RBBL307NR.

This table covers the wear sleeves used to restore a Transfer Case Input Shaft seal surface. Read more

3 Transfer Case Input Shaft Repair Sleeve parts are listed for the 1972 Fargo W200 Pickup, from NATIONAL, SCHAEFFLER and WJB / INMOTION PARTS. All of them fit every engine offered in the 1972 W200 Pickup.

Part numbers include NATIONAL 99212, SCHAEFFLER SR3514 and WJB / INMOTION PARTS WS99212.

This table covers the seals at the Transfer Case Input Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Transfer Case Input Shaft Seal parts are listed for the 1972 Fargo W200 Pickup, from BCA, NATIONAL, SCHAEFFLER and 1 other brand. All of them fit every engine offered in the 1972 W200 Pickup.

Listed part numbers: BCA NS473468, NATIONAL 473468 and SCHAEFFLER SS3109, plus the other parts above.

This table covers the Transfer Case Main Shaft Pilot bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

One part is listed for the 1972 Fargo W200 Pickup — WJB / INMOTION PARTS WRQ15902.

This table covers the Transfer Case Output Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

3 Transfer Case Output Shaft Bearing parts are listed for the 1972 Fargo W200 Pickup, from BCA and NATIONAL. All of them fit every engine offered in the 1972 W200 Pickup.

This group includes BCA NB2720, BCA NB307L and NATIONAL 307L.

This table covers the Transfer Case Output Shaft Pilot bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

2 Transfer Case Output Shaft Pilot Bearing parts are listed for the 1972 Fargo W200 Pickup, from WJB / INMOTION PARTS and BCA. All of them fit every engine offered in the 1972 W200 Pickup.

Economy: 1 part, from WJB / INMOTION PARTS. A representative part number is WJB / INMOTION PARTS WRB3216.

The Standard Replacement section: 1 option from BCA. BCA NBB3216 is listed in this group.

This group includes WJB / INMOTION PARTS WRB3216 and BCA NBB3216.

This table covers the wear sleeves used to restore a Transfer Case Output Shaft seal surface. Read more

3 Transfer Case Output Shaft Repair Sleeve parts for the 1972 Fargo W200 Pickup come from 3 brands — NATIONAL, SCHAEFFLER and WJB / INMOTION PARTS. Every part fits all 3 engine options (3.7L 225cid L6, 5.2L 318cid V8 and 6.6L 400cid V8).

Part numbers include NATIONAL 99212, SCHAEFFLER SR3514 and WJB / INMOTION PARTS WS99212.

This table covers the seals at the Transfer Case Output Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Transfer Case Output Shaft Seal parts for the 1972 Fargo W200 Pickup come from 4 brands — BCA, NATIONAL, SCHAEFFLER and 1 other brand. Every part fits all 3 engine options (3.7L 225cid L6, 5.2L 318cid V8 and 6.6L 400cid V8).

Listed part numbers: BCA NS473468, NATIONAL 473468 and SCHAEFFLER SS3109, plus the other parts above.

This table covers the wear sleeves used to restore a Transfer Case Shift Shaft seal surface. Read more

4 Transfer Case Shift Shaft Repair Sleeve parts are listed for the 1972 Fargo W200 Pickup, from BCA, NATIONAL, SCHAEFFLER and 1 other brand. All of them fit every engine offered in the 1972 W200 Pickup.

This group includes BCA NS99076, NATIONAL 99076 and SCHAEFFLER SR3453 and the remaining parts above.

This table covers the seals at the Transfer Case Shift Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Transfer Case Shift Shaft Seal parts are listed for the 1972 Fargo W200 Pickup, from BCA, NATIONAL, SCHAEFFLER and 1 other brand. All of them fit every engine offered in the 1972 W200 Pickup.

This group includes BCA NS2287, NATIONAL 2287 and SCHAEFFLER SS2158 and the remaining parts above.

This table covers the U-joints in the driveshaft. Read more

4 Universal Joint parts for the 1972 Fargo W200 Pickup come from MOOG.

In the Heavy Duty grade, MOOG supplies 2 parts: rated for severe service. A representative part number is MOOG 371.

Standard Replacement: 2 parts, from MOOG. A representative part number is MOOG 315G.

This group includes MOOG 371, MOOG 377 and MOOG 315G and the remaining parts above.