62 Engine parts are listed for the 1972 Fargo W200 Pickup, in 11 part types, covering all 3 engine options (3.7L 225cid L6, 5.2L 318cid V8 and 6.6L 400cid V8). Each one has a brand, a manufacturer part number and notes that say where it fits.
The engine on the 1972 Fargo W200 Pickup covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. The largest groups are Connecting Rod Bearing (18 parts), Crankshaft Seal (11 parts) and Crankshaft Main Bearing (7 parts). The other 8 part types cover the remaining 26 parts.
The 1972 Fargo W200 Pickup was sold with 3 engines. Every part on this page is engine-specific. Each part shows which engine(s) it fits.
The most listed brands for 1972 Fargo W200 Pickup engine parts are MAHLE / CLEVITE (22 parts), FEL-PRO (9 parts) and KING ENGINE BEARINGS (7 parts), plus 7 more brands. Quality grades include Standard Replacement and High Performance.
8 parts on this 1972 Fargo W200 Pickup page carry a "Popular" badge — the source catalog's flag for options frequently chosen for this vehicle — including MAHLE / CLEVITE CB481P (Connecting Rod Bearing) and MAHLE / CLEVITE MS540H (Crankshaft Main Bearing). Click any part number to see every vehicle that part fits.
Camshaft Bearing
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MAHLE / CLEVITE Fits: 5.2L 318cid V8 | SH875S | 🇨🇦 CA | Full Set | View on Amazon |
| SEALED POWER Fits: 3.7L 225cid L6 | 1454M | 🇨🇦 CA | (Size: Standard) | View on Amazon |
| SEALED POWER Fits: 5.2L 318cid V8 | 1451M | 🇨🇦 CA | 0.760 IN Length Center Bearing | View on Amazon |
This table covers the Camshaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.
3 Camshaft Bearing parts for the 1972 Fargo W200 Pickup come from 2 brands — SEALED POWER and MAHLE / CLEVITE.
Listed part numbers: MAHLE / CLEVITE SH875S, SEALED POWER 1454M and SEALED POWER 1451M.
Connecting Rod Bearing
High Performance
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINE PRO Fits: 5.2L 318cid V8 | 11481HX | 🇨🇦 CA | High PerformanceExtra Oil Clearance of .001 | View on Amazon |
| ENGINE PRO Fits: 5.2L 318cid V8 | 11481H | 🇨🇦 CA | Performance H SeriesSet | View on Amazon |
| KING ENGINE BEARINGS Fits: 5.2L 318cid V8 | CR805XPN | 🇨🇦 CA | Race bearings, Trimetal [Pmax Black]Set | View on Amazon |
| MAHLE / CLEVITE Fits: 5.2L 318cid V8 | CB481HN | 🇨🇦 CA | High PerformanceH Series (Tri-Metal) | View on Amazon |
| MAHLE / CLEVITE Fits: 5.2L 318cid V8 | CB481HXN | 🇨🇦 CA | High Performance.001in Extra Oil Clearance / Narrowed | View on Amazon |
| MAHLE / CLEVITE Fits: 5.2L 318cid V8 | CB481HNC | 🇨🇦 CA | High PerformanceH Series (Tri-Metal) | View on Amazon |
| MAHLE / CLEVITE Fits: 5.2L 318cid V8 | CB481HXNC | 🇨🇦 CA | High Performance.001in Extra Oil Clearance / Narrowed / Coated | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MAHLE / CLEVITE Popular Fits: 5.2L 318cid V8 | CB481P | 🇨🇦 CA | P Series (Tri-Metal)Pair | View on Amazon |
| MAHLE / CLEVITE Popular Fits: 5.2L 318cid V8 | CB481A8 | 🇨🇦 CA | A Series (Aluminum)Set | View on Amazon |
| MAHLE / CLEVITE Popular Fits: 5.2L 318cid V8 | CB481P8 | 🇨🇦 CA | P Series (Tri-Metal)Set | View on Amazon |
| SEALED POWER Popular Fits: 5.2L 318cid V8 | 82130CP | 🇨🇦 CA | Set | View on Amazon |
| KING ENGINE BEARINGS Fits: 5.2L 318cid V8 | CR805SI | 🇨🇦 CA | SetBimetal (Aluminum Silicon Base) | View on Amazon |
| MAHLE / CLEVITE Fits: 5.2L 318cid V8 | CB481A | 🇨🇦 CA | A Series (Aluminum)Pair | View on Amazon |
| MAHLE / CLEVITE Fits: 5.2L 318cid V8 | CB1779A | 🇨🇦 CA | A Series (Aluminum)Pair | View on Amazon |
| MAHLE / CLEVITE Fits: 5.2L 318cid V8 | CB1779A8 | 🇨🇦 CA | A Series (Aluminum)Set | View on Amazon |
| SEALED POWER Fits: 5.2L 318cid V8 | 2130CP | 🇨🇦 CA | View on Amazon |
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| KING ENGINE BEARINGS Fits: 3.7L 225cid L6 | CR614AM | 🇨🇦 CA | SetBimetal (Aluminum Base) | View on Amazon |
| SEALED POWER Fits: 3.7L 225cid L6 | 62375CP | 🇨🇦 CA | Set | View on Amazon |
This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.
18 Connecting Rod Bearing parts for the 1972 Fargo W200 Pickup come from 4 brands — MAHLE / CLEVITE, KING ENGINE BEARINGS, SEALED POWER and 1 other brand. The "Popular" part is MAHLE / CLEVITE CB481P.
The High Performance section lists 7 options from MAHLE / CLEVITE, ENGINE PRO and KING ENGINE BEARINGS — engineered beyond original-equipment specification. ENGINE PRO 11481HX is listed in this group.
In the Standard Replacement grade, MAHLE / CLEVITE, SEALED POWER and KING ENGINE BEARINGS supply 9 parts: built to original-equipment specification. A representative part number is MAHLE / CLEVITE CB481P.
2 further parts sit outside the graded sections, with the same engine-level match.
Conversion / Lower Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Fits: 5.2L 318cid V8 | CS8553 | 🇨🇦 CA | with 5 Bolt Valve Cover | View on Amazon |
| MAHLE / CLEVITE Fits: 5.2L 318cid V8 | CS3536B | 🇨🇦 CA | Timing Cover Gaskets/Seal Included: YES | View on Amazon |
| VICTOR REINZ Fits: 5.2L 318cid V8 | 081009701 | 🇨🇦 CA | with 5 Bolt Valve Cover | View on Amazon |
This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
3 Conversion / Lower Gasket Set parts for the 1972 Fargo W200 Pickup come from 3 brands — FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.
Part numbers include FEL-PRO CS8553, MAHLE / CLEVITE CS3536B and VICTOR REINZ 081009701.
Crankshaft Main Bearing
High Performance
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MAHLE / CLEVITE Popular Fits: 5.2L 318cid V8 | MS540H | 🇨🇦 CA | High PerformanceH Series (Tri-Metal) | View on Amazon |
| KING ENGINE BEARINGS Fits: 5.2L 318cid V8 | MB558XPC | 🇨🇦 CA | pmaxkote (racing line), polymer coatedSet | View on Amazon |
| KING ENGINE BEARINGS Fits: 5.2L 318cid V8 | MB558XPCX | 🇨🇦 CA | pmaxkote (racing line), polymer coatedSet | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MAHLE / CLEVITE Popular Fits: 5.2L 318cid V8 | MS540P | 🇨🇦 CA | P Series (Tri-Metal)Set | View on Amazon |
| KING ENGINE BEARINGS Fits: 5.2L 318cid V8 | MB558SI | 🇨🇦 CA | SetBimetal (Aluminum Silicon Base) | View on Amazon |
| SEALED POWER Fits: 5.2L 318cid V8 | 5024MA | 🇨🇦 CA | SetA-Series Aluminum Bearings | View on Amazon |
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| KING ENGINE BEARINGS Fits: 3.7L 225cid L6 | MB407AM | 🇨🇦 CA | SetBimetal (Aluminum Base) | View on Amazon |
This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.
7 Crankshaft Main Bearing parts are listed for the 1972 Fargo W200 Pickup, from KING ENGINE BEARINGS, MAHLE / CLEVITE and SEALED POWER. MAHLE / CLEVITE MS540H carries the "Popular" badge.
High Performance: 3 parts, from KING ENGINE BEARINGS and MAHLE / CLEVITE. A representative part number is MAHLE / CLEVITE MS540H.
The Standard Replacement section: 3 options from MAHLE / CLEVITE, KING ENGINE BEARINGS and SEALED POWER. MAHLE / CLEVITE MS540P is listed in this group.
1 ungrouped part is not assigned to a grade, with the same engine-level match.
Part numbers include MAHLE / CLEVITE MS540H, KING ENGINE BEARINGS MB558XPC and KING ENGINE BEARINGS MB558XPCX, among others listed above.
Crankshaft Repair Sleeve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| NATIONAL Fits: 5.2L 318cid V8 | 99218 | 🇨🇦 CA | Front | View on Amazon |
| WJB / INMOTION PARTS Fits: 3.7L 225cid L6 | WS99226 | 🇨🇦 CA | Front | View on Amazon |
| WJB / INMOTION PARTS Fits: 5.2L 318cid V8 | WS99218 | 🇨🇦 CA | Front | View on Amazon |
This table covers the sleeves used to restore a grooved crankshaft seal surface.
3 Crankshaft Repair Sleeve parts are listed for the 1972 Fargo W200 Pickup, from WJB / INMOTION PARTS and NATIONAL.
Listed part numbers: NATIONAL 99218, WJB / INMOTION PARTS WS99226 and WJB / INMOTION PARTS WS99218.
Crankshaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Popular Fits: 5.2L 318cid V8 | BS40245 | 🇨🇦 CA | Rubber | View on Amazon |
| NATIONAL Popular Fits: 5.2L 318cid V8 | 3103 | 🇨🇦 CA | Front | View on Amazon |
| BCA Fits: 5.2L 318cid V8 | NS3103 | 🇨🇦 CA | Front | View on Amazon |
| FEL-PRO Fits: 3.7L 225cid L6 | BS40240 | 🇨🇦 CA | Rubber | View on Amazon |
| MAHLE / CLEVITE Fits: 3.7L 225cid L6 | JV607 | 🇨🇦 CA | Set | View on Amazon |
| MAHLE / CLEVITE Fits: 5.2L 318cid V8 | JV606 | 🇨🇦 CA | SetRubber | View on Amazon |
| NATIONAL Fits: 5.2L 318cid V8 | 5414 | 🇨🇦 CA | RearSplit Type | View on Amazon |
| SCHAEFFLER Fits: 5.2L 318cid V8 | SS3145 | 🇨🇦 CA | Front | View on Amazon |
| VICTOR REINZ Fits: 5.2L 318cid V8 | 191014701 | 🇨🇦 CA | SetRubber | View on Amazon |
| WJB / INMOTION PARTS Fits: 5.2L 318cid V8 | WS3103 | 🇨🇦 CA | Front | View on Amazon |
| WJB / INMOTION PARTS Fits: 5.2L 318cid V8 | WS5414 | 🇨🇦 CA | RearSplit Type | View on Amazon |
This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
11 Crankshaft Seal parts are listed for the 1972 Fargo W200 Pickup, from FEL-PRO, NATIONAL, MAHLE / CLEVITE and 4 other brands. FEL-PRO BS40245 carries the "Popular" badge.
Cylinder Head Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Fits: 3.7L 225cid L6 | 7918PT1 | 🇨🇦 CA | View on Amazon | |
| FEL-PRO Fits: 5.2L 318cid V8 | 8553PT | 🇨🇦 CA | Permatorque | View on Amazon |
| FEL-PRO Fits: 5.2L 318cid V8 | 521SD | 🇨🇦 CA | Permatorque Severe Duty | View on Amazon |
| MAHLE / CLEVITE Fits: 3.7L 225cid L6 | 1162VC | 🇨🇦 CA | Composite | View on Amazon |
| MAHLE / CLEVITE Fits: 5.2L 318cid V8 | 3536SG | 🇨🇦 CA | Graphite | View on Amazon |
| VICTOR REINZ Fits: 5.2L 318cid V8 | 611033700 | 🇨🇦 CA | with 5 Bolt Valve Cover | View on Amazon |
This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
6 Cylinder Head Gasket parts for the 1972 Fargo W200 Pickup come from 3 brands — FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.
Part numbers include FEL-PRO 7918PT1, FEL-PRO 8553PT and FEL-PRO 521SD, among others listed above.
Cylinder Head Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Fits: 3.7L 225cid L6 | HS7918PT4 | 🇨🇦 CA | Includes Valve Stem Seals | View on Amazon |
| FEL-PRO Fits: 5.2L 318cid V8 | HS8553PT12 | 🇨🇦 CA | Includes Valve Stem SealsLarge Port Intake Manifold Gaskets Not Included | View on Amazon |
| MAHLE / CLEVITE Fits: 3.7L 225cid L6 | HS1162VE | 🇨🇦 CA | Includes Valve Stem Seals | View on Amazon |
| MAHLE / CLEVITE Fits: 5.2L 318cid V8 | HS3536 | 🇨🇦 CA | CompositeIncludes Valve Stem Seals | View on Amazon |
| VICTOR REINZ Fits: 3.7L 225cid L6 | 021012901 | 🇨🇦 CA | View on Amazon | |
| VICTOR REINZ Fits: 5.2L 318cid V8 | 021013701 | 🇨🇦 CA | Small Port Intake Manifold Gaskets Includedwith 5 Bolt Valve Cover | View on Amazon |
This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
6 Cylinder Head Gasket Set parts for the 1972 Fargo W200 Pickup come from 3 brands — FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.
Listed part numbers: FEL-PRO HS7918PT4, FEL-PRO HS8553PT12 and MAHLE / CLEVITE HS1162VE, plus the other parts above.
Cylinder Head Spacer Shim
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| VICTOR REINZ Fits: 5.2L 318cid V8 | 711638000 | 🇨🇦 CA | with 5 Bolt Valve Cover | View on Amazon |
This table covers the Cylinder Head Spacer shims.
This group shows a single part: VICTOR REINZ 711638000.
Harmonic Balancer Repair Sleeve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MAHLE / CLEVITE Fits: 3.7L 225cid L6 | 66593RS | 🇨🇦 CA | Nickel Plated Formed Steel | View on Amazon |
This table covers the wear sleeves used to restore a Harmonic Balancer seal surface.
One part is listed for the 1972 Fargo W200 Pickup — MAHLE / CLEVITE 66593RS.
Intake & Exhaust Manifold Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Fits: 3.7L 225cid L6 | MS9610B1 | 🇨🇦 CA | View on Amazon | |
| MAHLE / CLEVITE Fits: 3.7L 225cid L6 | MS16030 | 🇨🇦 CA | Composite | View on Amazon |
| VICTOR REINZ Fits: 3.7L 225cid L6 | 711472900 | 🇨🇦 CA | View on Amazon |
This table covers the Intake & Exhaust Manifold gasket sets. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
3 Intake & Exhaust Manifold Gasket Set parts for the 1972 Fargo W200 Pickup come from 3 brands — FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.
Part numbers include FEL-PRO MS9610B1, MAHLE / CLEVITE MS16030 and VICTOR REINZ 711472900.
Buying Engine Parts for a 1972 Fargo W200 Pickup
On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.
- Match the engine first. Every engine part here is engine-specific; each row shows which engine(s) it fits.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Connecting Rod Bearing and Crankshaft Seal .
Frequently Asked Questions
How many engine parts fit the 1972 Fargo W200 Pickup?
Our catalog currently lists 62 engine parts for the 1972 Fargo W200 Pickup across 11 subcategories and 10 brands, covering all 3 engine options (3.7L 225cid L6, 5.2L 318cid V8 and 6.6L 400cid V8). Each part is matched to the engine(s) it fits.
Do engine parts differ between 1972 Fargo W200 Pickup engines?
Yes. Every engine part on this page is engine-specific. Each row shows which engine(s) it fits — use the filter at the top to hide the rest. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.
What are the signs of engine problems on a 1972 Fargo W200 Pickup?
Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1972 Fargo W200 Pickup was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 1972 Fargo W200 Pickup?
First match the engine — each row shows which engine(s) the part fits. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 1972 Fargo W200 Pickup
Engine Parts for Other Fargo W200 Pickup Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.