1997 Ferrari 456 Ignition Parts

Engine:
5.5L V12

This page lists 11 ignition parts for the 1997 Ferrari 456, across 3 part types, covering the 5.5L V12 engine. Every part shows its brand, manufacturer part number and fitment notes.

The ignition system on the 1997 Ferrari 456 delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules. All 11 listed parts are Spark Plug (7 parts), Crankshaft Position Sensor (3 parts) and Ignition Coil (1 part).

Crankshaft Position Sensor

Full Service Kit

Brand Part Number Markets Notes Buy
WALKER PRODUCTS 23592056
🇺🇸 US 🇨🇦 CA
Full Service Kit
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
BOSCH 0261210152
🇺🇸 US 🇨🇦 CA
Engine Crankshaft Position Sensor
View on
Amazon
WALKER PRODUCTS 2352056
🇺🇸 US 🇨🇦 CA
Sensor Only
View on
Amazon

This table covers the sensors that report crankshaft position and engine speed. Typical signs include a stall, a no-start, or a code for cam or crank correlation. Check the connector and the reluctor gap before replacing the sensor.

Ignition Coil

Brand Part Number Markets Notes Buy
BOSCH 0221503449
🇺🇸 US 🇨🇦 CA
View on
Amazon

This table covers the coils that fire each spark plug. Typical signs include a misfire that follows one cylinder, a snap in damp weather, or a coil that is swollen or cracked. Swap a suspect coil with a neighbor to confirm, then replace boots that tore on the way off.

Spark Plug

Summary: Notes include pre-set gaps of 0.025", 0.028", 0.032", 0.035" and 0.036". Replacement brands in this table include NGK, AUTOLITE and CHAMPION.

Copper / Nickel

Brand Part Number Markets Notes Buy
AUTOLITE 4162
🇺🇸 US 🇨🇦 CA
Copper ResistorPre-Set Gap: 0.028"
Fitment notes — AUTOLITE 4162
Copper ResistorPre-Set Gap: 0.028"
Gap .028 (In) 0.7 (mm)OE Style
View on
Amazon
CHAMPION 905
🇺🇸 US 🇨🇦 CA
Copper PlusPre-Set Gap: 0.025"
Fitment notes — CHAMPION 905
Copper PlusPre-Set Gap: 0.025"
OE-Recommended Gap: 0.028"
View on
Amazon
NGK 2641
🇺🇸 US 🇨🇦 CA
StandardPre-Set Gap: 0.036"
Fitment notes — NGK 2641
StandardPre-Set Gap: 0.036"
OE-Recommended Gap: 0.028 IN
View on
Amazon

Iridium (lasts up to 4x longer than Copper / Nickel)

Brand Part Number Markets Notes Buy
DENSO Popular 5337
🇺🇸 US 🇨🇦 CA
Iridium PowerPre-Set Gap: 0.035"
Fitment notes — DENSO 5337
Iridium PowerPre-Set Gap: 0.035"
Gap .035
View on
Amazon
NGK Popular 2316
🇺🇸 US 🇨🇦 CA
Iridium IXPre-Set Gap: 0.032"
Fitment notes — NGK 2316
Iridium IXPre-Set Gap: 0.032"
OE-Recommended Gap: 0.028 IN
View on
Amazon

Platinum (lasts up to 2x longer than Copper / Nickel)

Brand Part Number Markets Notes Buy
NGK 6436
🇺🇸 US 🇨🇦 CA
VX Platinum
Fitment notes — NGK 6436
VX Platinum
Gap: 0.028
View on
Amazon
Brand Part Number Markets Notes Buy
MIGHTY 4162
🇺🇸 US 🇨🇦 CA
Autolite Resistor PlugOE Style
Fitment notes — MIGHTY 4162
Autolite Resistor PlugOE StyleCopperGap .028"
View on
Amazon

This table covers the spark plugs for this engine. Typical signs include misfire under load, rough idle, or a flashing check-engine light. Verify the gap even on pre-gapped plugs, and replace coil boots that come off a high-mileage engine.

Buying Ignition Parts for a 1997 Ferrari 456

On this vehicle, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules.

  • Confirm you have the 5.5L V12 engine — every part on this page is matched to it.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Spark Plug and Crankshaft Position Sensor .

Frequently Asked Questions

How many ignition parts fit the 1997 Ferrari 456?

Our catalog currently lists 11 ignition parts for the 1997 Ferrari 456 across 3 subcategories and 7 brands, covering the 5.5L V12 engine. Each part is matched to the engine(s) it fits.

What are the signs of ignition problems on a 1997 Ferrari 456?

Common symptoms include misfires under load, rough idle, flashing check-engine light, or poor starting in damp weather. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What spark-plug gap is listed for the 1997 Ferrari 456?

Notes on this page include pre-set gaps of 0.025", 0.028", 0.032", 0.035" and 0.036". Still verify against spec — even “pre-gapped” plugs should be checked before they go in.

What should I replace at the same time?

Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1997 Ferrari 456 was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 1997 Ferrari 456?

Every part on this page is matched to the 5.5L V12 engine. Then gap matters even on “pre-gapped” plugs — verify against spec, and replace coil boots when they come off a high-mileage engine. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 1997 Ferrari 456

Ignition Parts for Other Ferrari 456 Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.