This page lists 11 ignition parts for the 1998 Ferrari 456, across 3 part types, covering the 5.5L V12 engine. Every part shows its brand, manufacturer part number and fitment notes.
On the 1998 Ferrari 456, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules. All 11 listed parts are Spark Plug (7 parts), Crankshaft Position Sensor (3 parts) and Ignition Coil (1 part).
The 1998 Ferrari 456 came with a single engine, the 5.5L V12, and every part is verified against it.
7 brands supply ignition parts for the 1998 Ferrari 456, led by NGK (3 parts), WALKER PRODUCTS (2 parts) and BOSCH (2 parts), plus 4 more brands. Quality grades include Copper / Nickel, Iridium and Standard Replacement.
A "Popular" badge means the source catalog flagged the part as frequently chosen for the 1998 Ferrari 456. 2 parts have it, including DENSO 5337 (Spark Plug) and NGK 2316 (Spark Plug). Each part number opens a page with every vehicle that part fits.
Crankshaft Position Sensor
Full Service Kit
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| WALKER PRODUCTS | 23592056 | 🇺🇸 US | Full Service Kit | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BOSCH | 0261210152 | 🇺🇸 US | Engine Crankshaft Position Sensor | View on Amazon |
| WALKER PRODUCTS | 2352056 | 🇺🇸 US | Sensor Only | View on Amazon |
This table covers the sensors that report crankshaft position and engine speed. Typical signs include a stall, a no-start, or a code for cam or crank correlation. Check the connector and the reluctor gap before replacing the sensor.
3 Crankshaft Position Sensor parts for the 1998 Ferrari 456 come from 2 brands — WALKER PRODUCTS and BOSCH.
The Full Service Kit section lists 1 option from WALKER PRODUCTS — grouped under the catalog's "Full Service Kit" designation — the notes column spells out what sets them apart. WALKER PRODUCTS 23592056 is listed in this group.
In the Standard Replacement grade, BOSCH and WALKER PRODUCTS supply 2 parts: built to original-equipment specification. A representative part number is BOSCH 0261210152.
This group includes WALKER PRODUCTS 23592056, BOSCH 0261210152 and WALKER PRODUCTS 2352056.
Ignition Coil
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BOSCH | 0221503449 | 🇺🇸 US | View on Amazon |
This table covers the coils that fire each spark plug. Typical signs include a misfire that follows one cylinder, a snap in damp weather, or a coil that is swollen or cracked. Swap a suspect coil with a neighbor to confirm, then replace boots that tore on the way off.
This group shows a single part: BOSCH 0221503449.
Spark Plug
Summary: Notes include pre-set gaps of 0.025", 0.028", 0.032", 0.035" and 0.036". Replacement brands in this table include NGK, AUTOLITE and CHAMPION.
Copper / Nickel
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AUTOLITE | 4162 | 🇺🇸 US | Copper ResistorPre-Set Gap: 0.028" | View on Amazon |
| CHAMPION | 905 | 🇺🇸 US | Copper PlusPre-Set Gap: 0.025" | View on Amazon |
| NGK | 2641 | 🇺🇸 US | StandardPre-Set Gap: 0.036" | View on Amazon |
Iridium (lasts up to 4x longer than Copper / Nickel)
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DENSO Popular | 5337 | 🇺🇸 US | Iridium PowerPre-Set Gap: 0.035" | View on Amazon |
| NGK Popular | 2316 | 🇺🇸 US | Iridium IXPre-Set Gap: 0.032" | View on Amazon |
Platinum (lasts up to 2x longer than Copper / Nickel)
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| NGK | 6436 | 🇺🇸 US 🇨🇦 CA | VX Platinum | View on Amazon |
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MIGHTY | 4162 | 🇺🇸 US 🇨🇦 CA | Autolite Resistor PlugOE Style | View on Amazon |
This table covers the spark plugs for this engine. Typical signs include misfire under load, rough idle, or a flashing check-engine light. Verify the gap even on pre-gapped plugs, and replace coil boots that come off a high-mileage engine.
7 Spark Plug parts are listed for the 1998 Ferrari 456, from NGK, AUTOLITE, CHAMPION and 2 other brands. DENSO 5337 carries the "Popular" badge.
In the Copper / Nickel grade, AUTOLITE, CHAMPION and NGK supply 3 parts: grouped under the catalog's "Copper / Nickel" designation — the notes column spells out what sets them apart. A representative part number is AUTOLITE 4162.
The Iridium (lasts up to 4x longer than Copper / Nickel) section lists 2 options from DENSO and NGK — grouped under the catalog's "Iridium (lasts up to 4x longer than Copper / Nickel)" designation — the notes column spells out what sets them apart. DENSO 5337 is listed in this group.
In the Platinum (lasts up to 2x longer than Copper / Nickel) grade, NGK supplies 1 part: grouped under the catalog's "Platinum (lasts up to 2x longer than Copper / Nickel)" designation — the notes column spells out what sets them apart. A representative part number is NGK 6436.
1 ungrouped part is not assigned to a grade, with the same engine-level match.
This group includes DENSO 5337, AUTOLITE 4162 and CHAMPION 905 and the remaining parts above.
Buying Ignition Parts for a 1998 Ferrari 456
On this vehicle, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules.
- Confirm you have the 5.5L V12 engine — every part on this page is matched to it.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Spark Plug and Crankshaft Position Sensor .
Frequently Asked Questions
How many ignition parts fit the 1998 Ferrari 456?
Our catalog currently lists 11 ignition parts for the 1998 Ferrari 456 across 3 subcategories and 7 brands, covering the 5.5L V12 engine. Each part is matched to the engine(s) it fits.
What are the signs of ignition problems on a 1998 Ferrari 456?
Common symptoms include misfires under load, rough idle, flashing check-engine light, or poor starting in damp weather. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What spark-plug gap is listed for the 1998 Ferrari 456?
Notes on this page include pre-set gaps of 0.025", 0.028", 0.032", 0.035" and 0.036". Still verify against spec — even “pre-gapped” plugs should be checked before they go in.
What should I replace at the same time?
Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1998 Ferrari 456 was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 1998 Ferrari 456?
Every part on this page is matched to the 5.5L V12 engine. Then gap matters even on “pre-gapped” plugs — verify against spec, and replace coil boots when they come off a high-mileage engine. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 1998 Ferrari 456
Ignition Parts for Other Ferrari 456 Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.