The 2012 Ferrari 458 has 28 wheel parts with verified fitment on this page — 2 part types and 5 brands, covering the 4.5L V8 engine. Each part includes a manufacturer part number and application notes.
On the 2012 Ferrari 458, the wheel hardware covers lug nuts, studs, hub caps, TPMS sensors and trim rings. All 28 listed parts are Tire Pressure Monitoring System (TPMS) Stem / Service Kit (24 parts) and Tire Pressure Monitoring System (TPMS) Sensor (4 parts).
The 2012 Ferrari 458 came with a single engine, the 4.5L V8, and every part is verified against it.
5 brands supply wheel parts for the 2012 Ferrari 458, led by STANDARD MOTOR PRODUCTS (11 parts), BH SENS (8 parts) and DENSO (6 parts), plus 2 more brands. Quality grades include Valve Stem Assembly, Hardware Only and OE Replacement.
A "Popular" badge means the source catalog flagged the part as frequently chosen for the 2012 Ferrari 458. 5 parts have it, including STANDARD MOTOR PRODUCTS TPM4012SK (Tire Pressure Monitoring System (TPMS) Stem / Service Kit) and BH SENS RDV021 (Tire Pressure Monitoring System (TPMS) Stem / Service Kit). Each part number opens a page with every vehicle that part fits.
Tire Pressure Monitoring System (TPMS) Sensor
Aftermarket / Multi-Application (Programmed)
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ULTRA-POWER | TPM3 | 🇺🇸 US 🇨🇦 CA | Tire Pressure Monitoring System Sensorwith 433 MHz Sensor | View on Amazon |
OE Replacement (Programmed)
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BH SENS | RDE048V21 | 🇺🇸 US 🇨🇦 CA | OE Quality 433MHZ Replacement SensorNo Programming Required | View on Amazon |
| DENSO | 5501911 | 🇺🇸 US 🇨🇦 CA | OE ManufacturedProgrammed | View on Amazon |
| STANDARD MOTOR PRODUCTS | TPM3 | 🇺🇸 US 🇨🇦 CA | Core Material: Nickel Coated CoreProgrammed | View on Amazon |
This table covers the TPMS sensors mounted in each wheel. Typical signs include a warning lamp, a stored code, or a reading that drops out when the harness is wiggled. Inspect the connector and ground before replacing the sensor — wiring faults are often condemned as bad sensors.
4 Tire Pressure Monitoring System (TPMS) Sensor parts are listed for the 2012 Ferrari 458, from ULTRA-POWER, BH SENS, DENSO and 1 other brand.
In the Aftermarket / Multi-Application (Programmed) grade, ULTRA-POWER supplies 1 part: grouped under the catalog's "Aftermarket / Multi-Application (Programmed)" designation — the notes column spells out what sets them apart. A representative part number is ULTRA-POWER TPM3.
The OE Replacement (Programmed) section lists 3 options from BH SENS, DENSO and STANDARD MOTOR PRODUCTS — manufactured to match the original-equipment part in form, fit and function. BH SENS RDE048V21 is listed in this group.
Part numbers include ULTRA-POWER TPM3, BH SENS RDE048V21 and DENSO 5501911, among others listed above.
Tire Pressure Monitoring System (TPMS) Stem / Service Kit
Hardware Only
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS Popular | TPM4012SK | 🇺🇸 US 🇨🇦 CA | Qwik-Sensor Service KitSold Individually | View on Amazon |
| STANDARD MOTOR PRODUCTS | TPM1090K | 🇺🇸 US 🇨🇦 CA | Mounting Style: Screwithoutn Core, Seal, Washer, Retaining Nut, Cap | View on Amazon |
| ULTRA-POWER | TPM1090K | 🇺🇸 US 🇨🇦 CA | Tire Pressure Monitoring System Sensor Service Kit25 Per Box | View on Amazon |
Valve Stem Assembly
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BH SENS Popular | RDV021 | 🇺🇸 US 🇨🇦 CA | Flexible Angle MetalSilver 43mm | View on Amazon |
| BH SENS Popular | RDV022 | 🇺🇸 US 🇨🇦 CA | Flexible Angle MetalSilver 48mm | View on Amazon |
| BH SENS Popular | RDV026 | 🇺🇸 US 🇨🇦 CA | Flexible Angle MetalBlack 43mm | View on Amazon |
| STANDARD MOTOR PRODUCTS Popular | TPM2011VK | 🇺🇸 US 🇨🇦 CA | Qwik-Sensor ValveSold Individually | View on Amazon |
| BH SENS | RDV023 | 🇺🇸 US 🇨🇦 CA | Flexible Angle MetalSilver 49mm | View on Amazon |
| BH SENS | RDV027 | 🇺🇸 US 🇨🇦 CA | Flexible Angle MetalTitanium 43mm | View on Amazon |
| BH SENS | RDV024 | 🇺🇸 US 🇨🇦 CA | Flexible Angle MetalSilver 51mm | View on Amazon |
| BH SENS | RDV025 | 🇺🇸 US 🇨🇦 CA | Flexible Angle MetalSilver 56mm | View on Amazon |
| DENSO | 9990651 | 🇺🇸 US 🇨🇦 CA | OE Manufactured | View on Amazon |
| DENSO | 9990648 | 🇺🇸 US 🇨🇦 CA | OE Manufactured | View on Amazon |
| DENSO | 9990649 | 🇺🇸 US 🇨🇦 CA | OE Manufactured | View on Amazon |
| DENSO | 9990656 | 🇺🇸 US 🇨🇦 CA | OE Manufactured | View on Amazon |
| DENSO | 9990643 | 🇺🇸 US 🇨🇦 CA | OE Manufactured | View on Amazon |
| STANDARD MOTOR PRODUCTS | TPM2012VK | 🇺🇸 US 🇨🇦 CA | Sold Individually | View on Amazon |
| STANDARD MOTOR PRODUCTS | TPM2012VBK | 🇺🇸 US 🇨🇦 CA | Qwik-Sensor Valve | View on Amazon |
| STANDARD MOTOR PRODUCTS | TPM2012VCK | 🇺🇸 US 🇨🇦 CA | Qwik-Sensor Valve | View on Amazon |
| STANDARD MOTOR PRODUCTS | TPM5 | 🇺🇸 US 🇨🇦 CA | Mounting Location: Wheel Stem, Seal, Bolt, Retaining Nut, Cap | View on Amazon |
| STANDARD MOTOR PRODUCTS | TPM11 | 🇺🇸 US 🇨🇦 CA | Notes: 48 mm in Length with Green EndMounting Location: Wheel | View on Amazon |
| STANDARD MOTOR PRODUCTS | TPM10 | 🇺🇸 US 🇨🇦 CA | BlackNotes: Valve Stem Only | View on Amazon |
| STANDARD MOTOR PRODUCTS | TPM2013VK | 🇺🇸 US 🇨🇦 CA | 458 ItaliaOverall Length of 56.5mm | View on Amazon |
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ALLIGATOR | 591305 | 🇺🇸 US 🇨🇦 CA | Tire Pressure Monitoring System Sensor Service KitOE Valves with Torx Screw | View on Amazon |
This table covers TPMS valve stems and the service kits used when a tire is changed.
24 Tire Pressure Monitoring System (TPMS) Stem / Service Kit parts for the 2012 Ferrari 458 come from 5 brands — STANDARD MOTOR PRODUCTS, BH SENS, DENSO and 2 other brands. The "Popular" part is STANDARD MOTOR PRODUCTS TPM4012SK.
The Hardware Only section lists 3 options from STANDARD MOTOR PRODUCTS and ULTRA-POWER — grouped under the catalog's "Hardware Only" designation — the notes column spells out what sets them apart. STANDARD MOTOR PRODUCTS TPM4012SK is listed in this group.
In the Valve Stem Assembly grade, STANDARD MOTOR PRODUCTS, BH SENS and DENSO supply 20 parts: grouped under the catalog's "Valve Stem Assembly" designation — the notes column spells out what sets them apart. A representative part number is BH SENS RDV021.
1 further part sits outside the graded sections, with the same engine-level match.
Buying Wheel Parts for a 2012 Ferrari 458
On this vehicle, the wheel hardware covers lug nuts, studs, hub caps, TPMS sensors and trim rings.
- Confirm you have the 4.5L V8 engine — every part on this page is matched to it.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the TPMS service kit (valve core, seal, nut) with every tire change on sensor-equipped wheels.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Tire Pressure Monitoring System (TPMS) Stem / Service Kit and Tire Pressure Monitoring System (TPMS) Sensor .
Frequently Asked Questions
How many wheel parts fit the 2012 Ferrari 458?
Our catalog currently lists 28 wheel parts for the 2012 Ferrari 458 across 2 subcategories and 5 brands, covering the 4.5L V8 engine. Each part is matched to the engine(s) it fits.
What are the signs of wheel problems on a 2012 Ferrari 458?
Common symptoms include a TPMS light that will not clear, vibration after a wheel was serviced, or studs damaged by past over-torquing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace the TPMS service kit (valve core, seal, nut) with every tire change on sensor-equipped wheels.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2012 Ferrari 458 was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2012 Ferrari 458?
Every part on this page is matched to the 4.5L V8 engine. Then always torque lug nuts to spec in a star pattern — impact guns without torque sticks warp rotors and stretch studs. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2012 Ferrari 458
Wheel Parts for Other Ferrari 458 Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.