The 1968 Fiat 850 has 38 ignition parts with verified fitment on this page — 7 part types and 15 brands, covering all 3 engine options (817cc L4, 843cc L4 and 903cc L4). Each part includes a manufacturer part number and application notes.
On the 1968 Fiat 850, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules. 26 parts of the 38 listed are Ignition Coil (10 parts), Spark Plug Wire (10 parts) and Spark Plug (6 parts). The other 4 part types cover the remaining 12 parts.
The 1968 Fiat 850 was sold with 3 engines. Every part on this page is engine-specific. Each part shows which engine(s) it fits.
15 brands supply ignition parts for the 1968 Fiat 850, led by STANDARD MOTOR PRODUCTS (13 parts), WELLS (6 parts) and ACDELCO (3 parts), plus 12 more brands. Quality grades include Standard Replacement, Economy and Premium.
A "Popular" badge means the source catalog flagged the part as frequently chosen for the 1968 Fiat 850. 6 parts have it, including STANDARD MOTOR PRODUCTS UC15T (Ignition Coil) and ACDELCO R42XLS (Spark Plug). Each part number opens a page with every vehicle that part fits.
Condenser / Capacitor
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS Fits: 817cc L4 | MA116 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| WELLS Fits: 817cc L4 | 5H1145 | 🇺🇸 US 🇨🇦 CA | with Marelli Distributor | View on Amazon |
This table covers the capacitors used in this electrical or A/C circuit.
2 Condenser / Capacitor parts for the 1968 Fiat 850 come from 2 brands — STANDARD MOTOR PRODUCTS and WELLS.
This group includes STANDARD MOTOR PRODUCTS MA116 and WELLS 5H1145.
Distributor Cap
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS Fits: 817cc L4 | MA407 | 🇺🇸 US 🇨🇦 CA | with Vertical Distributor Cap Towers | View on Amazon |
| STANDARD MOTOR PRODUCTS Fits: 817cc L4 | GB458 | 🇺🇸 US 🇨🇦 CA | with Horizontal Distributor Cap Towers | View on Amazon |
| WELLS Fits: 817cc L4 | 5D1355 | 🇺🇸 US 🇨🇦 CA | with Horizontal Distributor Cap Towers | View on Amazon |
| WELLS Fits: 817cc L4 | 5D1117 | 🇺🇸 US 🇨🇦 CA | with Vertical Distributor Cap Towers | View on Amazon |
This table covers the Distributor caps. Typical signs include a leak at the neck, a cap that will not hold pressure, or a missing tether. Match the pressure rating or thread in the notes — radiator, reservoir and fuel caps are not interchangeable.
4 Distributor Cap parts are listed for the 1968 Fiat 850, from STANDARD MOTOR PRODUCTS and WELLS.
This group includes STANDARD MOTOR PRODUCTS MA407, STANDARD MOTOR PRODUCTS GB458 and WELLS 5D1355 and the remaining parts above.
Distributor Rotor
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FACET Fits: 817cc L4 | 38254RS | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| LILAND GLOBAL Fits: 817cc L4 | MA307LG | 🇺🇸 US 🇨🇦 CA | PremiumBlack Brass | View on Amazon |
| STANDARD MOTOR PRODUCTS Fits: 817cc L4 | MA307 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| WELLS Fits: 817cc L4 | 4R1034 | 🇺🇸 US 🇨🇦 CA | with Horizontal Distributor Cap Towerswith Ducellier Distributor | View on Amazon |
This table covers the Distributor rotors. Typical signs include shudder under braking, or a lip at the outer edge. Do not put new pads on a rotor that is below minimum thickness.
4 Distributor Rotor parts are listed for the 1968 Fiat 850, from FACET, LILAND GLOBAL, STANDARD MOTOR PRODUCTS and 1 other brand.
Part numbers include FACET 38254RS, LILAND GLOBAL MA307LG and STANDARD MOTOR PRODUCTS MA307, among others listed above.
Ignition Breaker Points
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS Fits: 817cc L4 | MA3466 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| WELLS Fits: 817cc L4 | 4P1023 | 🇺🇸 US 🇨🇦 CA | with Ducellier Distributor | View on Amazon |
This table covers the breaker points in a points-type distributor.
2 Ignition Breaker Points parts for the 1968 Fiat 850 come from 2 brands — STANDARD MOTOR PRODUCTS and WELLS.
Part numbers include STANDARD MOTOR PRODUCTS MA3466 and WELLS 4P1023.
Ignition Coil
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS Popular Fits: 817cc L4 | UC15T | 🇺🇸 US 🇨🇦 CA | T-Series | View on Amazon |
| FVP Fits: 817cc L4 | UC15F | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| HOLSTEIN Fits: 817cc L4 | 2IGC0058 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| SKP Fits: 817cc L4 | SKUF3T | 🇺🇸 US 🇨🇦 CA | Coil Pack | View on Amazon |
| SPECTRA PREMIUM Fits: 817cc L4 | C654 | 🇺🇸 US 🇨🇦 CA | Pack | View on Amazon |
| WAI GLOBAL Fits: 817cc L4 | CUF3 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| NGK Popular Fits: 817cc L4 | 48863 | 🇺🇸 US 🇨🇦 CA | 12 VoltInternal Resistor Coil | View on Amazon |
| STANDARD MOTOR PRODUCTS Fits: 817cc L4 | UC15 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| UNITED MOTOR PRODUCTS Fits: 817cc L4 | C15 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| WELLS Fits: 817cc L4 | 5C1019 | 🇺🇸 US 🇨🇦 CA | Used on most import products with 12 Volt system with Internal resistorUniversal 12 Volt Coil | View on Amazon |
This table covers the coils that fire each spark plug. Typical signs include a misfire that follows one cylinder, a snap in damp weather, or a coil that is swollen or cracked. Swap a suspect coil with a neighbor to confirm, then replace boots that tore on the way off.
10 Ignition Coil parts for the 1968 Fiat 850 come from 9 brands — STANDARD MOTOR PRODUCTS, FVP, HOLSTEIN and 6 other brands. The "Popular" part is STANDARD MOTOR PRODUCTS UC15T.
The Economy section lists 6 options from STANDARD MOTOR PRODUCTS, FVP, HOLSTEIN and 3 other brands — the catalog's value-priced group. STANDARD MOTOR PRODUCTS UC15T is listed in this group.
In the Standard Replacement grade, NGK, STANDARD MOTOR PRODUCTS, UNITED MOTOR PRODUCTS and 1 other brand supply 4 parts: built to original-equipment specification. A representative part number is NGK 48863.
Spark Plug
Summary: Notes include pre-set gaps of 0.025", 0.032", 0.035" and 0.041". Replacement brands in this table include ACDELCO, AUTOLITE and SKP.
Copper / Nickel
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ACDELCO Popular Fits: 817cc L4 | R42XLS | 🇺🇸 US 🇨🇦 CA | ProfessionalConventional | View on Amazon |
| AUTOLITE Fits: 817cc L4 | 62 | 🇺🇸 US 🇨🇦 CA | Copper Resistor Spark Plug | View on Amazon |
Double Platinum (lasts up to 3x longer than Copper / Nickel)
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ACDELCO Fits: 817cc L4 | 41804 | 🇺🇸 US 🇨🇦 CA | ProfessionalDouble Platinum | View on Amazon |
Iridium (lasts up to 4x longer than Copper / Nickel)
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AUTOLITE Fits: 817cc L4 | XP63 | 🇺🇸 US 🇨🇦 CA | Iridium XPDisplay Pack | View on Amazon |
| SKP Fits: 817cc L4 | SP1041 | 🇺🇸 US 🇨🇦 CA | Tapered Ground Electrode with Platinum Chip | View on Amazon |
Platinum (lasts up to 2x longer than Copper / Nickel)
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ACDELCO Popular Fits: 817cc L4 | 4 | 🇺🇸 US 🇨🇦 CA | ProfessionalRapidfire | View on Amazon |
This table covers the spark plugs for this engine. Typical signs include misfire under load, rough idle, or a flashing check-engine light. Verify the gap even on pre-gapped plugs, and replace coil boots that come off a high-mileage engine.
6 Spark Plug parts are listed for the 1968 Fiat 850, from ACDELCO, AUTOLITE and SKP. ACDELCO R42XLS carries the "Popular" badge.
In the Copper / Nickel grade, ACDELCO and AUTOLITE supply 2 parts: grouped under the catalog's "Copper / Nickel" designation — the notes column spells out what sets them apart. A representative part number is ACDELCO R42XLS.
In the Double Platinum (lasts up to 3x longer than Copper / Nickel) grade, ACDELCO supplies 1 part: grouped under the catalog's "Double Platinum (lasts up to 3x longer than Copper / Nickel)" designation — the notes column spells out what sets them apart. A representative part number is ACDELCO 41804.
The Iridium (lasts up to 4x longer than Copper / Nickel) section lists 2 options from AUTOLITE and SKP — grouped under the catalog's "Iridium (lasts up to 4x longer than Copper / Nickel)" designation — the notes column spells out what sets them apart. AUTOLITE XP63 is listed in this group.
In the Platinum (lasts up to 2x longer than Copper / Nickel) grade, ACDELCO supplies 1 part: grouped under the catalog's "Platinum (lasts up to 2x longer than Copper / Nickel)" designation — the notes column spells out what sets them apart. A representative part number is ACDELCO 4.
Listed part numbers: ACDELCO R42XLS, AUTOLITE 62 and ACDELCO 41804, plus the other parts above.
Spark Plug Wire
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| B&B Fits: 817cc L4 | S429251 | 🇺🇸 US 🇨🇦 CA | Suppressor Wire Set | View on Amazon |
High Performance (Lowest Resistance)
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| B&B Fits: 817cc L4 | R410029251 | 🇺🇸 US 🇨🇦 CA | OML: The Platinum Racing Wire | View on Amazon |
Premium
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| UNITED MOTOR PRODUCTS Popular Fits: 817cc L4 | 9404 | 🇺🇸 US 🇨🇦 CA | United-PackardSet | View on Amazon |
| STANDARD MOTOR PRODUCTS Fits: 817cc L4 | 55430 | 🇺🇸 US 🇨🇦 CA | IntermotorSet | View on Amazon |
| STANDARD MOTOR PRODUCTS Fits: 817cc L4 | 3401 | 🇺🇸 US 🇨🇦 CA | SetStandard® Premium | View on Amazon |
| STANDARD MOTOR PRODUCTS Fits: 817cc L4 | 55109 | 🇺🇸 US 🇨🇦 CA | IntermotorSet | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS Popular Fits: 817cc L4 | 27478 | 🇺🇸 US 🇨🇦 CA | Pro SeriesSet | View on Amazon |
| STANDARD MOTOR PRODUCTS Fits: 817cc L4 | 27419 | 🇺🇸 US 🇨🇦 CA | Pro SeriesSet | View on Amazon |
| STANDARD MOTOR PRODUCTS Fits: 817cc L4 | 23401 | 🇺🇸 US 🇨🇦 CA | Pro SeriesSet | View on Amazon |
| WALKER PRODUCTS Fits: 817cc L4 | 9241024 | 🇺🇸 US 🇨🇦 CA | Direct FitSet | View on Amazon |
This table covers the Spark Plug wires.
10 Spark Plug Wire parts for the 1968 Fiat 850 come from 4 brands — STANDARD MOTOR PRODUCTS, B&B, UNITED MOTOR PRODUCTS and 1 other brand. The "Popular" part is UNITED MOTOR PRODUCTS 9404.
The Economy section: 1 option from B&B. B&B S429251 is listed in this group.
The High Performance (Lowest Resistance) section lists 1 option from B&B — engineered beyond original-equipment specification. B&B R410029251 is listed in this group.
In the Premium grade, STANDARD MOTOR PRODUCTS and UNITED MOTOR PRODUCTS supply 4 parts: a step above OE specification in materials, tolerances or warranty terms. A representative part number is UNITED MOTOR PRODUCTS 9404.
Standard Replacement: 4 parts, from STANDARD MOTOR PRODUCTS and WALKER PRODUCTS. A representative part number is STANDARD MOTOR PRODUCTS 27478.
Buying Ignition Parts for a 1968 Fiat 850
On this vehicle, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules.
- Match the engine first. Every ignition part here is engine-specific; each row shows which engine(s) it fits.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Ignition Coil and Spark Plug Wire .
Frequently Asked Questions
How many ignition parts fit the 1968 Fiat 850?
Our catalog currently lists 38 ignition parts for the 1968 Fiat 850 across 7 subcategories and 15 brands, covering all 3 engine options (817cc L4, 843cc L4 and 903cc L4). Each part is matched to the engine(s) it fits.
Do ignition parts differ between 1968 Fiat 850 engines?
Yes. Every ignition part on this page is engine-specific. Each row shows which engine(s) it fits — use the filter at the top to hide the rest. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.
What are the signs of ignition problems on a 1968 Fiat 850?
Common symptoms include misfires under load, rough idle, flashing check-engine light, or poor starting in damp weather. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What spark-plug gap is listed for the 1968 Fiat 850?
Notes on this page include pre-set gaps of 0.025", 0.032", 0.035" and 0.041". Still verify against spec — even “pre-gapped” plugs should be checked before they go in.
What should I replace at the same time?
Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1968 Fiat 850 was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 1968 Fiat 850?
First match the engine — each row shows which engine(s) the part fits. Then gap matters even on “pre-gapped” plugs — verify against spec, and replace coil boots when they come off a high-mileage engine. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 1968 Fiat 850
Ignition Parts for Other Fiat 850 Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.