This page lists 9 steering parts for the 1971 Fiat 128, across 2 part types, covering the 1.1L L4 engine. Every part shows its brand, manufacturer part number and fitment notes.
On the 1971 Fiat 128, the steering system connects driver to road through the rack, pump, tie rods, and column components. All 9 listed parts are Power Steering Fluid (5 parts) and Tie Rod End (4 parts).
The 1971 Fiat 128 came with a single engine, the 1.1L L4, and every part is verified against it.
4 brands supply steering parts for the 1971 Fiat 128, led by PRESTONE (5 parts), ULTRA-POWER (2 parts) and SUSPENSIA (1 part), plus 1 more brand. Quality grades include Economy and Daily Driver.
A "Popular" badge means the source catalog flagged the part as frequently chosen for the 1971 Fiat 128. 1 part has it: PRESTONE AS261 (Power Steering Fluid). Each part number opens a page with every vehicle that part fits.
Power Steering Fluid
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| PRESTONE Popular | AS261 | 🇺🇸 US 🇨🇦 CA | 32 Ounce | View on Amazon |
| PRESTONE | AS260Y | 🇺🇸 US 🇨🇦 CA | 12 oz. | View on Amazon |
| PRESTONE | AS262Y | 🇺🇸 US 🇨🇦 CA | Power Steering Fluid Plus Stop Leak12 Fluid Ounce | View on Amazon |
| PRESTONE | AS263Y | 🇺🇸 US 🇨🇦 CA | Power Steering Fluid Plus Stop Leak1 Quart | View on Amazon |
| PRESTONE | AS266Y6 | 🇺🇸 US 🇨🇦 CA | 1 Gallon | View on Amazon |
This table covers the fluids specified for this steering system. Typical signs include discolored fluid, a burnt smell, or a level that keeps dropping. Use only the specification in the notes — the tables group grades because they are not interchangeable.
5 Power Steering Fluid parts for the 1971 Fiat 128 come from PRESTONE. The "Popular" part is PRESTONE AS261.
Listed part numbers: PRESTONE AS261, PRESTONE AS260Y and PRESTONE AS262Y, plus the other parts above.
Tie Rod End
Daily Driver
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SUSPENSIA | X14TE0211 | 🇺🇸 US 🇨🇦 CA | Front Outer | View on Amazon |
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN | 532470 | 🇺🇸 US 🇨🇦 CA | Front Outer | View on Amazon |
| ULTRA-POWER | ES801018 | 🇺🇸 US 🇨🇦 CA | Outer2 Door or 4 Door | View on Amazon |
| ULTRA-POWER | ES473R | 🇺🇸 US 🇨🇦 CA | Outer | View on Amazon |
This table covers the inner and outer tie-rod ends that steer each front knuckle. Typical signs include play on center, a feathered front tire, or a boot that has split and packed with grit. Replace inner and outer ends together on a high-mileage axle, then get an alignment.
4 Tie Rod End parts for the 1971 Fiat 128 come from 3 brands — ULTRA-POWER, SUSPENSIA and DORMAN.
In the Daily Driver grade, SUSPENSIA supplies 1 part: grouped for everyday commuting duty. A representative part number is SUSPENSIA X14TE0211.
The Economy section lists 3 options from ULTRA-POWER and DORMAN — the catalog's value-priced group. DORMAN 532470 is listed in this group.
This group includes SUSPENSIA X14TE0211, DORMAN 532470 and ULTRA-POWER ES801018 and the remaining parts above.
Buying Steering Parts for a 1971 Fiat 128
On this vehicle, the steering system connects driver to road through the rack, pump, tie rods, and column components.
- Confirm you have the 1.1L L4 engine — every part on this page is matched to it.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the inner and outer tie-rod ends together on higher-mileage vehicles, then get an alignment.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Power Steering Fluid and Tie Rod End .
Frequently Asked Questions
How many steering parts fit the 1971 Fiat 128?
Our catalog currently lists 9 steering parts for the 1971 Fiat 128 across 2 subcategories and 4 brands, covering the 1.1L L4 engine. Each part is matched to the engine(s) it fits.
What are the signs of steering problems on a 1971 Fiat 128?
Common symptoms include play or looseness on center, a whine when turning, fluid weeping from rack boots, or uneven tire wear on the front axle. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace the inner and outer tie-rod ends together on higher-mileage vehicles, then get an alignment.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1971 Fiat 128 was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 1971 Fiat 128?
Every part on this page is matched to the 1.1L L4 engine. Then flush old power-steering fluid when replacing a pump or rack — grit in the old fluid is the number-one cause of repeat failure. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 1971 Fiat 128
Steering Parts for Other Fiat 128 Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.