1978 Fiat 128 Steering Parts

Engine:
1.3L L4

The 1978 Fiat 128 has 14 steering parts with verified fitment on this page — 3 part types and 6 brands, covering the 1.3L L4 engine. Each part includes a manufacturer part number and application notes.

On the 1978 Fiat 128, the steering system connects driver to road through the rack, pump, tie rods, and column components. All 14 listed parts are Tie Rod End (8 parts), Power Steering Fluid (5 parts) and Rack and Pinion (1 part).

Power Steering Fluid

Brand Part Number Markets Notes Buy
PRESTONE Popular AS261
🇺🇸 US 🇨🇦 CA
32 Ounce
View on
Amazon
PRESTONE AS260Y
🇺🇸 US 🇨🇦 CA
12 oz.
View on
Amazon
PRESTONE AS262Y
🇺🇸 US 🇨🇦 CA
Power Steering Fluid Plus Stop Leak12 Fluid Ounce
View on
Amazon
PRESTONE AS263Y
🇺🇸 US 🇨🇦 CA
Power Steering Fluid Plus Stop Leak1 Quart
View on
Amazon
PRESTONE AS266Y6
🇺🇸 US 🇨🇦 CA
1 Gallon
View on
Amazon

This table covers the fluids specified for this steering system. Typical signs include discolored fluid, a burnt smell, or a level that keeps dropping. Use only the specification in the notes — the tables group grades because they are not interchangeable.

Rack and Pinion

Brand Part Number Markets Notes Buy
MAVAL 9400M
🇺🇸 US 🇨🇦 CA
Remanufactured Rack and Pinion Assembly
Fitment notes — MAVAL 9400M
Remanufactured Rack and Pinion Assembly
Manual Steering
View on
Amazon

This table covers the steering gear assemblies that turn the tie rods. Typical signs include fluid at a torn boot, a growl when you turn, or play that the inner tie rods do not explain. Flush the old power-steering fluid with the rack — grit in the old fluid is the usual cause of a repeat leak.

Tie Rod End

Daily Driver

Brand Part Number Markets Notes Buy
CENTRIC 61204006
🇺🇸 US 🇨🇦 CA
Front Inner
View on
Amazon
SUSPENSIA X14TE0211
🇺🇸 US 🇨🇦 CA
Front Outer
View on
Amazon
SUSPENSIA X14TE0212
🇺🇸 US 🇨🇦 CA
Front Outer2 door
Fitment notes — SUSPENSIA X14TE0212
Front Outer2 door4 Door
View on
Amazon
SUSPENSIA X14TR0177
🇺🇸 US 🇨🇦 CA
Front Inner2 door or 4 door
View on
Amazon

Economy

Brand Part Number Markets Notes Buy
ULTRA-POWER Popular ES801018
🇺🇸 US 🇨🇦 CA
Outer2 Door or 4 Door
Fitment notes — ULTRA-POWER ES801018
Outer2 Door or 4 DoorSedan
View on
Amazon
ULTRA-POWER Popular ES473R
🇺🇸 US 🇨🇦 CA
Outer
View on
Amazon
DORMAN 532470
🇺🇸 US 🇨🇦 CA
Front Outer
View on
Amazon
DORMAN 532779
🇺🇸 US 🇨🇦 CA
Front Inner
View on
Amazon

This table covers the inner and outer tie-rod ends that steer each front knuckle. Typical signs include play on center, a feathered front tire, or a boot that has split and packed with grit. Replace inner and outer ends together on a high-mileage axle, then get an alignment.

Buying Steering Parts for a 1978 Fiat 128

On this vehicle, the steering system connects driver to road through the rack, pump, tie rods, and column components.

  • Confirm you have the 1.3L L4 engine — every part on this page is matched to it.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace the inner and outer tie-rod ends together on higher-mileage vehicles, then get an alignment.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Tie Rod End and Power Steering Fluid .

Frequently Asked Questions

How many steering parts fit the 1978 Fiat 128?

Our catalog currently lists 14 steering parts for the 1978 Fiat 128 across 3 subcategories and 6 brands, covering the 1.3L L4 engine. Each part is matched to the engine(s) it fits.

What are the signs of steering problems on a 1978 Fiat 128?

Common symptoms include play or looseness on center, a whine when turning, fluid weeping from rack boots, or uneven tire wear on the front axle. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What should I replace at the same time?

Where labor overlaps, replace the inner and outer tie-rod ends together on higher-mileage vehicles, then get an alignment.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1978 Fiat 128 was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 1978 Fiat 128?

Every part on this page is matched to the 1.3L L4 engine. Then flush old power-steering fluid when replacing a pump or rack — grit in the old fluid is the number-one cause of repeat failure. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 1978 Fiat 128

Steering Parts for Other Fiat 128 Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.