1971 Fiat 850 Engine Parts

Engine:

Showing parts for every engine. Select an engine to see only what fits.

25 Engine parts are listed for the 1971 Fiat 850, in 11 part types, covering both the 817cc L4 and the 903cc L4. Each one has a brand, a manufacturer part number and notes that say where it fits.

The engine on the 1971 Fiat 850 covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. The largest groups are Expansion Plug (8 parts), Piston Ring (4 parts) and Camshaft Repair Sleeve (3 parts). The other 8 part types cover the remaining 10 parts.

Camshaft Repair Sleeve

Brand Part Number Markets Notes Buy
NATIONAL Fits: 903cc L4 99114
🇺🇸 US
View on
Amazon
SCHAEFFLER Fits: 903cc L4 SR3463
🇺🇸 US 🇨🇦 CA
11 MM Width35.56 mm Outside Diameter
View on
Amazon
WJB / INMOTION PARTS Fits: 903cc L4 WS99114
🇺🇸 US
View on
Amazon

This table covers the wear sleeves used to restore a Camshaft seal surface.

Camshaft Seal

Brand Part Number Markets Notes Buy
BCA Fits: 903cc L4 NS223035
🇺🇸 US 🇨🇦 CA
View on
Amazon
NATIONAL Fits: 903cc L4 223035
🇺🇸 US 🇨🇦 CA
View on
Amazon

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Crankshaft Seal

Brand Part Number Markets Notes Buy
ELRING Fits: 903cc L4 440780
🇨🇦 CA
Material: ACM (Polyacrylate)Radial Shaft Seal Design: AwithBS
Fitment notes — ELRING 440780
Material: ACM (Polyacrylate)Radial Shaft Seal Design: AwithBSSwirl Type: LD
CoupeBase Model
View on
Amazon

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Cylinder Head Gasket

Brand Part Number Markets Notes Buy
ELRING Fits: 903cc L4 985880
🇨🇦 CA
Thickness: 1.12 MM
Fitment notes — ELRING 985880
Thickness: 1.12 MM
CoupeBase Model
View on
Amazon
ELRING Fits: 903cc L4 144420
🇨🇦 CA
Thickness: 1.74 MM
Fitment notes — ELRING 144420
Thickness: 1.74 MM
CoupeBase Model
View on
Amazon

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Expansion Plug

Brand Part Number Markets Notes Buy
DORMAN Popular Fits: 903cc L4 555024
🇺🇸 US 🇨🇦 CA
Nominal Dia.: 31.91mmMetric Dia.
Fitment notes — DORMAN 555024
Nominal Dia.: 31.91mmMetric Dia.31.91mmSteelHeight: 0.300"Open End Dia.: 1.263"
1.25"Shallow Cup Type
View on
Amazon
DORMAN Popular Fits: 903cc L4 565027
🇺🇸 US 🇨🇦 CA
Nominal Dia.: 38.25mmMetric Dia.
Fitment notes — DORMAN 565027
Nominal Dia.: 38.25mmMetric Dia.38.25mmOpen End Dia.: 1.511"
1.500" Closed End Diameter1-1/2" Brass Cup
View on
Amazon
DORMAN Fits: 903cc L4 555027
🇺🇸 US 🇨🇦 CA
Nominal Dia.: 38.25mmMetric Dia.
Fitment notes — DORMAN 555027
Nominal Dia.: 38.25mmMetric Dia.38.25mmSteelHeight: 0.570"Open End Dia.: 1.514"
1.50"
View on
Amazon
DORMAN Fits: 903cc L4 568009
🇺🇸 US 🇨🇦 CA
Standard Size: 1-1/2"Metric Size: 38.5mm
Fitment notes — DORMAN 568009
Standard Size: 1-1/2"Metric Size: 38.5mmMetric Max. Expansion: 38.862mm
1-1/2" Quick Seal Copper
View on
Amazon
MELLING Fits: 903cc L4 MPE151R
🇺🇸 US 🇨🇦 CA
Steel
Fitment notes — MELLING MPE151R
Steel
Base Model or Spider
View on
Amazon
PIONEER Fits: 903cc L4 PE151R
🇺🇸 US 🇨🇦 CA
Steel
View on
Amazon
PIONEER Fits: 903cc L4 PE151
🇺🇸 US 🇨🇦 CA
Steel
View on
Amazon
PIONEER Fits: 903cc L4 PE151BR
🇺🇸 US 🇨🇦 CA
Brass or Steel
View on
Amazon

This table covers the Expansion plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes.

Oil Filter

Brand Part Number Markets Notes Buy
HASTINGS / BALDWIN Fits: 903cc L4 LF198
🇺🇸 US 🇨🇦 CA
COUPE,SPIDER
View on
Amazon

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive.

Oil Pan Gasket

Brand Part Number Markets Notes Buy
ELRING Fits: 903cc L4 918024
🇨🇦 CA
CoupeBase Model
View on
Amazon

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Piston Ring

Brand Part Number Markets Notes Buy
HASTINGS MANUFACTURING Fits: 903cc L4 2C6796S
🇺🇸 US 🇨🇦 CA
1 Cylinder SetChrome Top Ring
Fitment notes — HASTINGS MANUFACTURING 2C6796S
1 Cylinder SetChrome Top RingTop Groove: 1.75 mm2nd Groove: 2.00 mm1ST Oil Groove: 4.00 mm
Engine. Bore (In.): 2.559 (Size: Standard)
View on
Amazon
HASTINGS MANUFACTURING Fits: 903cc L4 2C6796
🇺🇸 US 🇨🇦 CA
Full SetChrome Top Ring
Fitment notes — HASTINGS MANUFACTURING 2C6796
Full SetChrome Top RingTop Groove: 1.75 mm2nd Groove: 2.00 mm1ST Oil Groove: 4.00 mmTop Ring Surface Treatment: Chrome
Engine. Bore (In.): 2.559
View on
Amazon
HASTINGS MANUFACTURING Fits: 903cc L4 6796
🇺🇸 US 🇨🇦 CA
Full SetPlain Cast Top Ring
Fitment notes — HASTINGS MANUFACTURING 6796
Full SetPlain Cast Top RingTop Groove: 1.75 mm2nd Groove: 2.00 mm1ST Oil Groove: 4.00 mmTop Ring Surface Treatment: Phosphate
Engine. Bore (In.): 2.559
View on
Amazon
HASTINGS MANUFACTURING Fits: 903cc L4 6796S
🇺🇸 US 🇨🇦 CA
1 Cylinder SetPlain Cast Top Ring
Fitment notes — HASTINGS MANUFACTURING 6796S
1 Cylinder SetPlain Cast Top RingTop Groove: 1.75 mm2nd Groove: 2.00 mm1ST Oil Groove: 4.00 mm
Engine. Bore (In.): 2.559 (Size: Standard)
View on
Amazon

This table covers the rings that seal each piston to the cylinder wall.

Timing Cover Seal

Brand Part Number Markets Notes Buy
NATIONAL Fits: 903cc L4 224220
🇺🇸 US 🇨🇦 CA
Timing Cover Seal OIL SEALBase Model
View on
Amazon

This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Valve Cover Gasket

Brand Part Number Markets Notes Buy
ELRING Fits: 903cc L4 154016
🇨🇦 CA
CoupeBase Model
View on
Amazon

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Valve Spring Shim

Brand Part Number Markets Notes Buy
PIONEER Fits: 903cc L4 B106
🇺🇸 US 🇨🇦 CA
View on
Amazon

This table covers the Valve Spring shims.

Buying Engine Parts for a 1971 Fiat 850

On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.

  • Match the engine first. Every engine part here is engine-specific; each row shows which engine(s) it fits.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Expansion Plug and Piston Ring .

Frequently Asked Questions

How many engine parts fit the 1971 Fiat 850?

Our catalog currently lists 25 engine parts for the 1971 Fiat 850 across 11 subcategories and 10 brands, covering both the 817cc L4 and the 903cc L4. Each part is matched to the engine(s) it fits.

Do engine parts differ between 1971 Fiat 850 engines?

Yes. Every engine part on this page is engine-specific. Each row shows which engine(s) it fits — use the filter at the top to hide the rest. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.

What are the signs of engine problems on a 1971 Fiat 850?

Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What should I replace at the same time?

Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1971 Fiat 850 was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 1971 Fiat 850?

First match the engine — each row shows which engine(s) the part fits. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 1971 Fiat 850

Engine Parts for Other Fiat 850 Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.