The 1978 Fiat Brava has 6 engine parts with verified fitment on this page — 3 part types and 5 brands, covering both the 1.8L L4 and the 2.0L L4. Each part includes a manufacturer part number and application notes.
The engine on the 1978 Fiat Brava covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. All 6 listed parts are Camshaft Seal (4 parts), Camshaft Repair Sleeve (1 part) and Expansion Plug (1 part).
The 1978 Fiat Brava was sold with both the 1.8L L4 and the 2.0L L4. Every part on this page is engine-specific. Each part shows which engine(s) it fits.
The most listed brands for 1978 Fiat Brava engine parts are SKF (2 parts), AJUSA (1 part) and ELRING (1 part), plus 2 more brands.
Each part number listed for the 1978 Fiat Brava opens a page with every vehicle that part fits.
Camshaft Repair Sleeve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SKF Fits: 2.0L L4 | 99114 | 🇺🇸 US | Shaft Diameter: 1.181 In | View on Amazon |
This table covers the wear sleeves used to restore a Camshaft seal surface.
One part is listed for the 1978 Fiat Brava — SKF 99114.
Camshaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 2.0L L4 | 15009700 | 🇺🇸 US | 30 x 52 x 7Clockwise | View on Amazon |
| ELRING Fits: 2.0L L4 | 212458 | 🇺🇸 US | Coupe | View on Amazon |
| SCHAEFFLER Fits: 2.0L L4 | SS2287 | 🇺🇸 US | 2.05" I:D X 2.05" O.D. X 0.31" Width | View on Amazon |
| SKF Fits: 2.0L L4 | 11640 | 🇺🇸 US | View on Amazon |
This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
4 Camshaft Seal parts are listed for the 1978 Fiat Brava, from AJUSA, ELRING, SCHAEFFLER and 1 other brand.
Part numbers include AJUSA 15009700, ELRING 212458 and SCHAEFFLER SS2287, among others listed above.
Expansion Plug
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Fits: 1.8L L4 | 116201 | 🇺🇸 US 🇨🇦 CA | 1/4"-28 | View on Amazon |
This table covers the Expansion plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes.
This group shows a single part: DORMAN 116201.
Buying Engine Parts for a 1978 Fiat Brava
On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.
- Match the engine first. Every engine part here is engine-specific; each row shows which engine(s) it fits.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Camshaft Seal and Camshaft Repair Sleeve .
Frequently Asked Questions
How many engine parts fit the 1978 Fiat Brava?
Our catalog currently lists 6 engine parts for the 1978 Fiat Brava across 3 subcategories and 5 brands, covering both the 1.8L L4 and the 2.0L L4. Each part is matched to the engine(s) it fits.
Do engine parts differ between 1978 Fiat Brava engines?
Yes. Every engine part on this page is engine-specific. Each row shows which engine(s) it fits — use the filter at the top to hide the rest. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.
What are the signs of engine problems on a 1978 Fiat Brava?
Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1978 Fiat Brava was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 1978 Fiat Brava?
First match the engine — each row shows which engine(s) the part fits. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 1978 Fiat Brava
Engine Parts for Other Fiat Brava Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.