1983 Fiat X-1/9 Engine Parts

This table covers the wear sleeves used to restore a Camshaft seal surface. Read more

3 Camshaft Repair Sleeve parts are listed for the 1983 Fiat X-1/9, from NATIONAL, SCHAEFFLER and WJB / INMOTION PARTS. 2 parts fit every engine; the other 1 is engine-specific.

This group includes NATIONAL 99114, SCHAEFFLER SR3463 and WJB / INMOTION PARTS WS99114.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Camshaft Seal parts are listed for the 1983 Fiat X-1/9, from BCA, ELRING, ITM ENGINE COMPONENTS and 1 other brand. 2 parts fit every engine; the other 2 are engine-specific.

Part numbers include BCA NS223035, ELRING 440750 and ITM ENGINE COMPONENTS 1506303, among others listed above.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

4 Connecting Rod Bearing parts for the 1983 Fiat X-1/9 come from 2 brands — KING ENGINE BEARINGS and MAHLE / CLEVITE.

Part numbers include KING ENGINE BEARINGS CR4099AM, KING ENGINE BEARINGS CR4488AM and MAHLE / CLEVITE CB1332A, among others listed above.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

2 Crankshaft Main Bearing parts are listed for the 1983 Fiat X-1/9, from ITM ENGINE COMPONENTS and KING ENGINE BEARINGS.

This group includes ITM ENGINE COMPONENTS 5M1442 and KING ENGINE BEARINGS MB562AM.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

5 Crankshaft Repair Sleeve parts are listed for the 1983 Fiat X-1/9, from WJB / INMOTION PARTS, NATIONAL, BCA and 1 other brand. NATIONAL 99157 carries the "Popular" badge. 3 parts fit every engine; the other 2 are engine-specific.

This group includes NATIONAL 99157, BCA NS99157 and SCHAEFFLER SR3483 and the remaining parts above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

6 Crankshaft Seal parts are listed for the 1983 Fiat X-1/9, from NATIONAL, WJB / INMOTION PARTS, ELRING and 1 other brand. NATIONAL 224025 carries the "Popular" badge. 4 parts fit every engine; the other 2 are engine-specific.

Listed part numbers: NATIONAL 224025, ELRING 440780 and NATIONAL 227040, plus the other parts above.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

KAT'S HEATERS supplies both parts for the 1983 Fiat X-1/9. 1 part fits every engine; the other 1 is engine-specific.

This group includes KAT'S HEATERS 30501 and KAT'S HEATERS 11401.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

One part is listed for the 1983 Fiat X-1/9 — ITM ENGINE COMPONENTS RX9337.

This table covers the Expansion plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

7 Expansion Plug parts for the 1983 Fiat X-1/9 come from 3 brands — DORMAN, QUALCAST and MELLING.

Part numbers include DORMAN 555027, DORMAN 568009 and DORMAN 565027, among others listed above.

This table covers the Intake & Exhaust Manifold gasket sets. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

This group shows a single part: ELRING 189768.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

One part is listed for the 1983 Fiat X-1/9 — ITM ENGINE COMPONENTS RV34496.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

8 Oil Filter parts are listed for the 1983 Fiat X-1/9, from VARIOUS MFR, WIX, CHAMP / LUBER-FINER and 2 other brands. VARIOUS MFR PG241 carries the "Popular" badge.

In the Economy grade, VARIOUS MFR and CHAMP / LUBER-FINER supply 3 parts: the catalog's value-priced group. A representative part number is VARIOUS MFR PG241.

The Standard Replacement section lists 5 options from WIX, ACDELCO, MANN and 1 other brand — built to original-equipment specification. WIX 51056 is listed in this group.

Part numbers include VARIOUS MFR PG241, CHAMP / LUBER-FINER PH2814 and VARIOUS MFR PG101, among others listed above.