2011 Fiat Strada Engine Parts

Engine:
1.8L L4

This page lists 35 engine parts for the 2011 Fiat Strada, across 19 part types, covering the 1.8L L4 engine. Every part shows its brand, manufacturer part number and fitment notes.

On the 2011 Fiat Strada, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. Most of the listed parts are Crankshaft Seal (4 parts), Oil Filter (3 parts) and Valve Cover Gasket (3 parts). The other 16 part types cover the remaining 25 parts.

Camshaft Seal

Brand Part Number Markets Notes Buy
AJUSA 15012600
🇲🇽 MX
35 x 48 x 7Clockwise
View on
Amazon

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Conversion / Lower Gasket Set

Brand Part Number Markets Notes Buy
AJUSA 54144100
🇲🇽 MX
View on
Amazon
ELRING 903590
🇲🇽 MX
with Crankshaft Seal
Fitment notes — ELRING 903590
with Crankshaft Seal
Adventure
View on
Amazon

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.

Crankshaft Seal

Brand Part Number Markets Notes Buy
AJUSA 15035700
🇲🇽 MX
RearCounter Clockwise
View on
Amazon
AJUSA 15005300
🇲🇽 MX
FrontClockwise
View on
Amazon
ELRING 583050
🇲🇽 MX
Height [MM]: 6Inner Diameter [mm]: 32
Fitment notes — ELRING 583050
Height [MM]: 6Inner Diameter [mm]: 32Material: FPM (Fluoride Rubber)Radial Shaft Seal Design: ASSwirl Type: Right-hand Twist
Adventure
View on
Amazon
ELRING 902760
🇲🇽 MX
Inner Diameter [mm]: 91Material: FPM (Fluoride Rubber)
Fitment notes — ELRING 902760
Inner Diameter [mm]: 91Material: FPM (Fluoride Rubber)Outer Diameter [mm]: 111Radial Shaft Seal Design: A/BSSwirl Type: Left-hand Twist
Adventure
View on
Amazon

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Cylinder Head Bolt

Brand Part Number Markets Notes Buy
AJUSA 81004800
🇲🇽 MX
View on
Amazon

This table covers the bolts that clamp the cylinder head to the block.

Cylinder Head Gasket

Brand Part Number Markets Notes Buy
AJUSA 10158300
🇲🇽 MX
Multi Layered Steel
Fitment notes — AJUSA 10158300
Multi Layered Steel
82 Bore Diameter
View on
Amazon
ELRING 571670
🇲🇽 MX
Adventure
View on
Amazon

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Cylinder Head Gasket Set

Brand Part Number Markets Notes Buy
AJUSA 52244500
🇲🇽 MX
Multi Layered Steel
View on
Amazon
ELRING 572920
🇲🇽 MX
Includes Valve Stem Seals
Fitment notes — ELRING 572920
Includes Valve Stem Seals
Adventure
View on
Amazon

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.

Engine Kit Gasket Set

Brand Part Number Markets Notes Buy
AJUSA 50262900
🇲🇽 MX
Multi Layered Steel
View on
Amazon
ELRING 574370
🇲🇽 MX
with crankshaft sealwith valve stem seals
Fitment notes — ELRING 574370
with crankshaft sealwith valve stem seals
Adventure
View on
Amazon

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.

Intake Manifold Gasket

Brand Part Number Markets Notes Buy
AJUSA 13079600
🇲🇽 MX
View on
Amazon
ELRING 939340
🇲🇽 MX
Adventure
View on
Amazon

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Oil Drain Plug

Brand Part Number Markets Notes Buy
ELRING 012001
🇲🇽 MX
with Seal RingSpanner Size: 13 mm
Fitment notes — ELRING 012001
with Seal RingSpanner Size: 13 mmThread Size: M14X1,5x20
Adventure
View on
Amazon

This table covers the drain plugs in the oil pan.

Oil Drain Plug Gasket

Brand Part Number Markets Notes Buy
ELRING 176090
🇲🇽 MX
Material: ElastomerShape: Asymmetrical
Fitment notes — ELRING 176090
Material: ElastomerShape: Asymmetrical
Adventure
View on
Amazon

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Oil Filler Cap

Brand Part Number Markets Notes Buy
MOTORAD MO150
🇲🇽 MX
View on
Amazon

This table covers the caps on the oil filler neck.

Oil Filter

Economy

Brand Part Number Markets Notes Buy
VARIOUS MFR PG111
🇲🇽 MX
Spin-On
View on
Amazon

High Performance / Heavy Duty

Brand Part Number Markets Notes Buy
MOBIL M1101A
🇲🇽 MX
Extended Performance
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
VARIOUS MFR PG111EX
🇲🇽 MX
Extended LifeSpin-On
View on
Amazon

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive.

Oil Filter Housing Seal

Brand Part Number Markets Notes Buy
ELRING 903570
🇲🇽 MX
Housing Material: Cast Aluminium
Fitment notes — ELRING 903570
Housing Material: Cast Aluminium
Adventure
View on
Amazon

This table covers the seals at the Oil Filter Housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Oil Pan Gasket

Brand Part Number Markets Notes Buy
ELRING 485960
🇲🇽 MX
Material: Ethylene Acrylic Elastomer (AEM)
Fitment notes — ELRING 485960
Material: Ethylene Acrylic Elastomer (AEM)
Adventure
View on
Amazon

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Oil Pump Gasket

Brand Part Number Markets Notes Buy
ELRING 571850
🇲🇽 MX
RightAdventure
View on
Amazon
ELRING 573060
🇲🇽 MX
LeftAdventure
View on
Amazon

This table covers the gaskets that seal the Oil Pump. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Timing Cover Gasket

Brand Part Number Markets Notes Buy
ELRING 574080
🇲🇽 MX
with Crankshaft Seal
Fitment notes — ELRING 574080
with Crankshaft Seal
Adventure
View on
Amazon
ELRING 571760
🇲🇽 MX
Material: ACM (Polyacrylate)
Fitment notes — ELRING 571760
Material: ACM (Polyacrylate)
Adventure
View on
Amazon

This table covers the gaskets that seal the Timing Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Valve Cover Gasket

Brand Part Number Markets Notes Buy
AJUSA 11043400
🇲🇽 MX
View on
Amazon
ELRING 518030
🇲🇽 MX
Material: Polyacrylate Rubber (ACM)
Fitment notes — ELRING 518030
Material: Polyacrylate Rubber (ACM)
Adventure
View on
Amazon
ELRING 763880
🇲🇽 MX
Material: Zinc-Copper brazing alloy (ZN-CU)
Fitment notes — ELRING 763880
Material: Zinc-Copper brazing alloy (ZN-CU)
Adventure
View on
Amazon

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Valve Lifter

Brand Part Number Markets Notes Buy
AJUSA 85000100
🇲🇽 MX
View on
Amazon

This table covers the lifters / tappets that transfer cam motion to the valves.

Valve Stem Seal

Brand Part Number Markets Notes Buy
AJUSA 12002300
🇲🇽 MX
6 x 10.5 x 10
View on
Amazon
AJUSA 57003800
🇲🇽 MX
View on
Amazon
ELRING 191420
🇲🇽 MX
Set
Fitment notes — ELRING 191420
Set
Adventure
View on
Amazon

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Buying Engine Parts for a 2011 Fiat Strada

On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.

  • Confirm you have the 1.8L L4 engine — every part on this page is matched to it.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Crankshaft Seal and Oil Filter .

Frequently Asked Questions

How many engine parts fit the 2011 Fiat Strada?

Our catalog currently lists 35 engine parts for the 2011 Fiat Strada across 19 subcategories and 5 brands, covering the 1.8L L4 engine. Each part is matched to the engine(s) it fits.

What are the signs of engine problems on a 2011 Fiat Strada?

Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What should I replace at the same time?

Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2011 Fiat Strada was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 2011 Fiat Strada?

Every part on this page is matched to the 1.8L L4 engine. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 2011 Fiat Strada

Engine Parts for Other Fiat Strada Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.