The 2012 Fiat Panda has 6 ignition parts with verified fitment on this page — 3 part types and 3 brands, covering the 1.2L L4 engine. Each part includes a manufacturer part number and application notes.
The ignition system on the 2012 Fiat Panda delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules. All 6 listed parts are Camshaft Position Sensor (3 parts), Crankshaft Position Sensor (2 parts) and Ignition Coil (1 part).
The 2012 Fiat Panda came with a single engine, the 1.2L L4, and every part is verified against it.
3 brands supply ignition parts for the 2012 Fiat Panda, led by MARELLI (4 parts), WALKER PRODUCTS (1 part) and STANDARD MOTOR PRODUCTS (1 part).
Each part number listed for the 2012 Fiat Panda opens a page with every vehicle that part fits.
Camshaft Position Sensor
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MARELLI | SAC092 | 🇲🇽 MX | View on Amazon | |
| MARELLI | SAC095 | 🇲🇽 MX | View on Amazon | |
| MARELLI | SAC132 | 🇲🇽 MX | View on Amazon |
This table covers the sensors that report camshaft position to the ECU. Typical signs include a stall, a no-start, or a code for cam or crank correlation. Check the connector and the reluctor gap before replacing the sensor.
3 Camshaft Position Sensor parts for the 2012 Fiat Panda come from MARELLI.
Part numbers include MARELLI SAC092, MARELLI SAC095 and MARELLI SAC132.
Crankshaft Position Sensor
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MARELLI | SAG188 | 🇲🇽 MX | View on Amazon | |
| WALKER PRODUCTS | 2351954 | 🇲🇽 MX | Sensor Only | View on Amazon |
This table covers the sensors that report crankshaft position and engine speed. Typical signs include a stall, a no-start, or a code for cam or crank correlation. Check the connector and the reluctor gap before replacing the sensor.
2 Crankshaft Position Sensor parts for the 2012 Fiat Panda come from 2 brands — MARELLI and WALKER PRODUCTS.
This group includes MARELLI SAG188 and WALKER PRODUCTS 2351954.
Ignition Coil
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS | UF696 | 🇲🇽 MX | View on Amazon |
This table covers the coils that fire each spark plug. Typical signs include a misfire that follows one cylinder, a snap in damp weather, or a coil that is swollen or cracked. Swap a suspect coil with a neighbor to confirm, then replace boots that tore on the way off.
This group shows a single part: STANDARD MOTOR PRODUCTS UF696.
Buying Ignition Parts for a 2012 Fiat Panda
On this vehicle, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules.
- Confirm you have the 1.2L L4 engine — every part on this page is matched to it.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Camshaft Position Sensor and Crankshaft Position Sensor .
Frequently Asked Questions
How many ignition parts fit the 2012 Fiat Panda?
Our catalog currently lists 6 ignition parts for the 2012 Fiat Panda across 3 subcategories and 3 brands, covering the 1.2L L4 engine. Each part is matched to the engine(s) it fits.
What are the signs of ignition problems on a 2012 Fiat Panda?
Common symptoms include misfires under load, rough idle, flashing check-engine light, or poor starting in damp weather. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2012 Fiat Panda was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2012 Fiat Panda?
Every part on this page is matched to the 1.2L L4 engine. Then gap matters even on “pre-gapped” plugs — verify against spec, and replace coil boots when they come off a high-mileage engine. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2012 Fiat Panda
Ignition Parts for Other Fiat Panda Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.