6 Ignition parts are listed for the 2008 Fiat Panda, in 3 part types, covering the 1.2L L4 engine. Each one has a brand, a manufacturer part number and notes that say where it fits.
On the 2008 Fiat Panda, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules. All 6 listed parts are Camshaft Position Sensor (3 parts), Ignition Coil (2 parts) and Crankshaft Position Sensor (1 part).
Every part on this page is matched to the 1.2L L4 — the only engine offered in the 2008 Fiat Panda.
The most listed brands for 2008 Fiat Panda ignition parts are MARELLI (4 parts), STANDARD MOTOR PRODUCTS (1 part) and UNITED MOTOR PRODUCTS (1 part).
Each part number listed for the 2008 Fiat Panda opens a page with every vehicle that part fits.
Camshaft Position Sensor
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MARELLI | SAC092 | 🇲🇽 MX | View on Amazon | |
| MARELLI | SAC095 | 🇲🇽 MX | View on Amazon | |
| MARELLI | SAC132 | 🇲🇽 MX | View on Amazon |
This table covers the sensors that report camshaft position to the ECU. Typical signs include a stall, a no-start, or a code for cam or crank correlation. Check the connector and the reluctor gap before replacing the sensor.
MARELLI supplies the 3 Camshaft Position Sensor parts for the 2008 Fiat Panda.
Listed part numbers: MARELLI SAC092, MARELLI SAC095 and MARELLI SAC132.
Crankshaft Position Sensor
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MARELLI | SAG188 | 🇲🇽 MX | View on Amazon |
This table covers the sensors that report crankshaft position and engine speed. Typical signs include a stall, a no-start, or a code for cam or crank correlation. Check the connector and the reluctor gap before replacing the sensor.
One part is listed for the 2008 Fiat Panda — MARELLI SAG188.
Ignition Coil
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS | UF696 | 🇲🇽 MX | View on Amazon | |
| UNITED MOTOR PRODUCTS | COP607 | 🇲🇽 MX | View on Amazon |
This table covers the coils that fire each spark plug. Typical signs include a misfire that follows one cylinder, a snap in damp weather, or a coil that is swollen or cracked. Swap a suspect coil with a neighbor to confirm, then replace boots that tore on the way off.
2 Ignition Coil parts are listed for the 2008 Fiat Panda, from STANDARD MOTOR PRODUCTS and UNITED MOTOR PRODUCTS.
Listed part numbers: STANDARD MOTOR PRODUCTS UF696 and UNITED MOTOR PRODUCTS COP607.
Buying Ignition Parts for a 2008 Fiat Panda
On this vehicle, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules.
- Confirm you have the 1.2L L4 engine — every part on this page is matched to it.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Camshaft Position Sensor and Ignition Coil .
Frequently Asked Questions
How many ignition parts fit the 2008 Fiat Panda?
Our catalog currently lists 6 ignition parts for the 2008 Fiat Panda across 3 subcategories and 3 brands, covering the 1.2L L4 engine. Each part is matched to the engine(s) it fits.
What are the signs of ignition problems on a 2008 Fiat Panda?
Common symptoms include misfires under load, rough idle, flashing check-engine light, or poor starting in damp weather. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2008 Fiat Panda was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2008 Fiat Panda?
Every part on this page is matched to the 1.2L L4 engine. Then gap matters even on “pre-gapped” plugs — verify against spec, and replace coil boots when they come off a high-mileage engine. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2008 Fiat Panda
Ignition Parts for Other Fiat Panda Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.