2021 Ford F-650 Engine Parts

Engine:

Showing parts for every engine. Select an engine to see only what fits.

This page lists 61 engine parts for the 2021 Ford F-650, across 34 part types, covering both the 6.7L V8 DIESEL Turbocharged and the 7.3L V8. Every part shows its brand, manufacturer part number and fitment notes.

The engine on the 2021 Ford F-650 covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. The largest groups are Oil Filter (10 parts), Camshaft Bearing (5 parts) and Valve Seat (4 parts). The other 31 part types cover the remaining 42 parts.

Camshaft Bearing

Brand Part Number Markets Notes Buy
DURA-BOND Popular Fits: 7.3L V8 FP35T
🇺🇸 US 🇨🇦 CA
Coated
View on
Amazon
DURA-BOND Fits: 7.3L V8 FP351T
🇺🇸 US 🇨🇦 CA
Coated
View on
Amazon
DURA-BOND Fits: 7.3L V8 FP352T
🇺🇸 US 🇨🇦 CA
Coated
View on
Amazon
DURA-BOND Fits: 7.3L V8 FP353T
🇺🇸 US 🇨🇦 CA
Coated
View on
Amazon
DURA-BOND Fits: 7.3L V8 FP354T
🇺🇸 US 🇨🇦 CA
Coated
View on
Amazon

This table covers the Camshaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.

Conversion / Lower Gasket Set

Brand Part Number Markets Notes Buy
MAHLE / CLEVITE Fits: 7.3L V8 CS55516
🇺🇸 US 🇨🇦 CA
View on
Amazon

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.

Crankshaft Seal

Brand Part Number Markets Notes Buy
MAHLE / CLEVITE Fits: 7.3L V8 68115
🇺🇸 US 🇨🇦 CA
Fluoroelastomer
Fitment notes — MAHLE / CLEVITE 68115
Fluoroelastomer
Rear
View on
Amazon

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Crankshaft Seal Gasket

Brand Part Number Markets Notes Buy
MAHLE / CLEVITE Fits: 7.3L V8 B33824
🇺🇸 US 🇨🇦 CA
Crankshaft Seal Retainer GasketMolded Rubber
Fitment notes — MAHLE / CLEVITE B33824
Crankshaft Seal Retainer GasketMolded RubberRear
View on
Amazon

This table covers the gaskets that seal the Crankshaft Seal. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Cylinder Head Alignment Dowel Pin

Brand Part Number Markets Notes Buy
MAHLE / CLEVITE Fits: 7.3L V8 GS34087
🇺🇸 US 🇨🇦 CA
SteelContains 2 Pieces
Fitment notes — MAHLE / CLEVITE GS34087
SteelContains 2 Pieces
16mm Straight Dowel Pin
View on
Amazon

This table covers the Cylinder Head Alignment Dowel pins.

Cylinder Head Bolt

Brand Part Number Markets Notes Buy
MAHLE / CLEVITE Fits: 7.3L V8 GS34082
🇺🇸 US 🇨🇦 CA
Cylinder Head Bolt KitSet
View on
Amazon

This table covers the bolts that clamp the cylinder head to the block.

Cylinder Head Gasket

Brand Part Number Markets Notes Buy
MAHLE / CLEVITE Fits: 7.3L V8 55517
🇺🇸 US 🇨🇦 CA
Multi-Layered Steel
Fitment notes — MAHLE / CLEVITE 55517
Multi-Layered Steel
Right
View on
Amazon
MAHLE / CLEVITE Fits: 7.3L V8 55516
🇺🇸 US 🇨🇦 CA
Multi-Layered Steel
Fitment notes — MAHLE / CLEVITE 55516
Multi-Layered Steel
Left
View on
Amazon

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Cylinder Head Gasket Set

Brand Part Number Markets Notes Buy
MAHLE / CLEVITE Fits: 7.3L V8 HS55516
🇺🇸 US 🇨🇦 CA
Includes Valve Stem Seals
Fitment notes — MAHLE / CLEVITE HS55516
Includes Valve Stem Seals
Exhaust Manifold Gaskets Not IncludedCylinder Head Bolt Replacement recommended
View on
Amazon

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.

Cylinder Head Temperature Sensor

Brand Part Number Markets Notes Buy
STANDARD MOTOR PRODUCTS Fits: 7.3L V8 TX365
🇺🇸 US 🇨🇦 CA
View on
Amazon

This table covers the Cylinder Head temperature sensors. Typical signs include hard cold starts, a fan that never comes on, or a gauge that disagrees with the scan tool. A sensor that reads open or shorted is usually the part; an implausible-but-smooth reading can be wiring.

Exhaust Valve

Brand Part Number Markets Notes Buy
QUALCAST Fits: 7.3L V8 1013512
🇺🇸 US 🇨🇦 CA
1.670 Head Diameter. 0.312 stem. 5.690 OAL. 3G
View on
Amazon
SBI Fits: 7.3L V8 13512
🇺🇸 US 🇨🇦 CA
Hollow Stem
View on
Amazon

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one.

Intake Manifold Gasket

Brand Part Number Markets Notes Buy
MAHLE / CLEVITE Fits: 7.3L V8 MS20624
🇺🇸 US 🇨🇦 CA
SetMolded Rubber
View on
Amazon

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Intake Valve

Brand Part Number Markets Notes Buy
QUALCAST Fits: 7.3L V8 1013511
🇺🇸 US 🇨🇦 CA
2.163 Head DIA. 0.313 Stem. 5.743 OAL. 3G.
View on
Amazon
SBI Fits: 7.3L V8 13511
🇺🇸 US 🇨🇦 CA
Hollow Stem
View on
Amazon

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one.

Oil Cooler

Brand Part Number Markets Notes Buy
MOTORCRAFT Fits: 7.3L V8 YOC32
🇺🇸 US 🇨🇦 CA
Includes Filter
View on
Amazon

This table covers the heat exchangers that cool engine oil. Typical signs include oil at the cooler fittings, or coolant that looks like a milkshake. Pressure-test both circuits after a cooler swap — a leak here mixes oil and coolant.

Oil Cooler Gasket

Brand Part Number Markets Notes Buy
MAHLE / CLEVITE Fits: 7.3L V8 GS34083
🇺🇸 US 🇨🇦 CA
Engine Oil Cooler Gasket Set
View on
Amazon

This table covers the gaskets that seal the Oil Cooler. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Oil Dipstick / Tube

Brand Part Number Markets Notes Buy
MOTORCRAFT Fits: 7.3L V8 EDPST42
🇺🇸 US 🇨🇦 CA
Engine Oil Dipstick TubeTube Only
View on
Amazon
MOTORCRAFT Fits: 7.3L V8 EDPS68
🇺🇸 US 🇨🇦 CA
Engine Oil DipstickDipstick Only
View on
Amazon
MOTORCRAFT Fits: 7.3L V8 EDPST2
🇺🇸 US 🇨🇦 CA
Engine Oil Dipstick TubeTube Only
Fitment notes — MOTORCRAFT EDPST2
Engine Oil Dipstick TubeTube Only
Extension
View on
Amazon

This table covers the Oil Dipstick tubes.

Oil Drain Plug

Brand Part Number Markets Notes Buy
DORMAN Fits: 7.3L V8 090175
🇺🇸 US 🇨🇦 CA
Integrated GasketM12 x 1.75 Thread
View on
Amazon

This table covers the drain plugs in the oil pan.

Oil Drain Plug Gasket

Brand Part Number Markets Notes Buy
MAHLE / CLEVITE Fits: 7.3L V8 B33828
🇺🇸 US 🇨🇦 CA
Molded Rubber
Fitment notes — MAHLE / CLEVITE B33828
Molded Rubber
M11 or 7/16 IN Drain Plug Gasket Size
View on
Amazon
VICTOR REINZ Fits: 7.3L V8 712492000
🇺🇸 US 🇨🇦 CA
View on
Amazon

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Oil Filler Cap

Brand Part Number Markets Notes Buy
MOTORCRAFT Fits: 7.3L V8 EC791
🇺🇸 US 🇨🇦 CA
SAE-5W30
View on
Amazon

This table covers the caps on the oil filler neck.

Oil Filter

Economy

Brand Part Number Markets Notes Buy
BOSCH Fits: 7.3L V8 72227WS
🇺🇸 US 🇨🇦 CA
Workshop Oil Filter
View on
Amazon
VARIOUS MFR Fits: 7.3L V8 PG4651
🇺🇸 US 🇨🇦 CA
View on
Amazon

High Performance / Heavy Duty

Brand Part Number Markets Notes Buy
MOBIL Fits: 7.3L V8 M1210A
🇺🇸 US 🇨🇦 CA
Extended Performance
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
MOTORCRAFT Popular Fits: 7.3L V8 FL820S
🇺🇸 US 🇨🇦 CA
View on
Amazon
WIX Popular Fits: 7.3L V8 51372
🇺🇸 US 🇨🇦 CA
Part may be slightly shorter than OE old design due to product update.
View on
Amazon
BOSCH Fits: 7.3L V8 3410
🇺🇸 US 🇨🇦 CA
Premium Oil Filter
View on
Amazon
HASTINGS / BALDWIN Fits: 7.3L V8 LF110
🇺🇸 US 🇨🇦 CA
View on
Amazon
MAHLE / CLEVITE Fits: 7.3L V8 OC705
🇺🇸 US 🇨🇦 CA
Filter Outside Diameter (mm): 93.00Spin-On
View on
Amazon
MOTORCRAFT Fits: 7.3L V8 FL2122
🇺🇸 US 🇨🇦 CA
View on
Amazon
VARIOUS MFR Fits: 7.3L V8 PG4651EX
🇺🇸 US 🇨🇦 CA
Extended Life
View on
Amazon

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive.

Oil Pan Gasket

Brand Part Number Markets Notes Buy
MAHLE / CLEVITE Fits: 7.3L V8 OS32453
🇺🇸 US 🇨🇦 CA
View on
Amazon

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Oil Pressure Relief Valve Gasket

Brand Part Number Markets Notes Buy
MAHLE / CLEVITE Fits: 7.3L V8 GS34085
🇺🇸 US 🇨🇦 CA
Molded Rubber
Fitment notes — MAHLE / CLEVITE GS34085
Molded Rubber
Oil Return Tube O-Ring Set
View on
Amazon

This table covers the gaskets that seal the Oil Pressure Relief Valve. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Oil Pump Control Valve / Solenoid

Brand Part Number Markets Notes Buy
DORMAN Fits: 7.3L V8 926542
🇺🇸 US 🇨🇦 CA
View on
Amazon
STANDARD MOTOR PRODUCTS Fits: 7.3L V8 OPS407
🇺🇸 US 🇨🇦 CA
View on
Amazon

This table covers the Oil Pump Control Valve solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid.

Piston Ring

Brand Part Number Markets Notes Buy
ITM ENGINE COMPONENTS Fits: 7.3L V8 0219073
🇺🇸 US 🇨🇦 CA
Set
Fitment notes — ITM ENGINE COMPONENTS 0219073
Set
(Size: Standard)
View on
Amazon

This table covers the rings that seal each piston to the cylinder wall.

Push Rod

Brand Part Number Markets Notes Buy
SBI Fits: 7.3L V8 1901556
🇺🇸 US 🇨🇦 CA
Intake and Exhaust8.415 Length
Fitment notes — SBI 1901556
Intake and Exhaust8.415 Length375X075 Diameter/Wall
View on
Amazon

This table covers the pushrods that transfer lifter motion to the rocker arms.

Timing Cover Gasket

Brand Part Number Markets Notes Buy
MAHLE / CLEVITE Fits: 7.3L V8 JV5289
🇺🇸 US 🇨🇦 CA
Set
View on
Amazon

This table covers the gaskets that seal the Timing Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Timing Cover Seal

Brand Part Number Markets Notes Buy
MAHLE / CLEVITE Fits: 7.3L V8 68114
🇺🇸 US 🇨🇦 CA
PTFE (Polytetrafluoroethylene)
View on
Amazon

This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Valve Cover Gasket

Brand Part Number Markets Notes Buy
MAHLE / CLEVITE Fits: 7.3L V8 VS50977S
🇺🇸 US 🇨🇦 CA
Molded Rubber
View on
Amazon
MAHLE / CLEVITE Fits: 7.3L V8 VS50977
🇺🇸 US 🇨🇦 CA
Set
Fitment notes — MAHLE / CLEVITE VS50977
Set
Use with # GS34084
View on
Amazon

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Valve Cover Grommet

Brand Part Number Markets Notes Buy
MAHLE / CLEVITE Fits: 7.3L V8 GS34084
🇺🇸 US 🇨🇦 CA
Contains 10 pcsKit
Fitment notes — MAHLE / CLEVITE GS34084
Contains 10 pcsKitSetMolded Rubber
View on
Amazon

This table covers the Valve Cover grommets.

Valve Guide

Brand Part Number Markets Notes Buy
QUALCAST Fits: 7.3L V8 303229
🇺🇸 US 🇨🇦 CA
2.240 OAL. 0.3146 I.D. 0.5145 O.D.
View on
Amazon
SBI Fits: 7.3L V8 1403229
🇺🇸 US 🇨🇦 CA
Intake and Exhaust0.3146 I.D.
Fitment notes — SBI 1403229
Intake and Exhaust0.3146 I.D.0.5145 O.D.2.240 Length1-P TypeNote: Install I.D. Chamfer Towards Cumbustion Chamber
View on
Amazon

This table covers the pressed-in bronze and cast-iron guides that align valve stems. Typical signs include oil smoke on startup, a guide that has gone oval, or a valve that no longer seats quietly. Guides are a machine-shop fit. Confirm stem diameter in the notes before ordering.

Valve Seat

Brand Part Number Markets Notes Buy
QUALCAST Fits: 7.3L V8 21175050N
🇺🇸 US 🇨🇦 CA
INSERT
Fitment notes — QUALCAST 21175050N
INSERT
Exhaust1.406T Inner Diameter 1.750 Outer Diameter 0.250 Depth. Nickel
View on
Amazon
QUALCAST Fits: 7.3L V8 21218751
🇺🇸 US 🇨🇦 CA
INSERT
Fitment notes — QUALCAST 21218751
INSERT
Intake1.950T I.D. 2.187 O.D. 0.250 Depth
View on
Amazon
SBI Fits: 7.3L V8 SB218751
🇺🇸 US 🇨🇦 CA
Intake2-3/16 O.D.
Fitment notes — SBI SB218751
Intake2-3/16 O.D.1.950T I.D.0.2250 Depth
View on
Amazon
SBI Fits: 7.3L V8 SB175070N
🇺🇸 US 🇨🇦 CA
Non-Magnetic
Fitment notes — SBI SB175070N
Non-Magnetic
Exhaust1-3/4 O.D.1.406T I.D.1/4 Depth
View on
Amazon

This table covers the Valve seats.

Valve Spring

Brand Part Number Markets Notes Buy
SBI Fits: 7.3L V8 1601710
🇺🇸 US 🇨🇦 CA
Exhaust2.821 Length
Fitment notes — SBI 1601710
Exhaust2.821 Length1.250T O.D.0.822T I.DConicalNote: with Green StripeAlso Services Spring with Purple Stripe
View on
Amazon
SBI Fits: 7.3L V8 1601709
🇺🇸 US 🇨🇦 CA
Intake2.679 Length
Fitment notes — SBI 1601709
Intake2.679 Length1.267T O.D.0.822T I.DConicalNote: with Yellow StripeAlso Services Spring with Pink Stripe
View on
Amazon

This table covers the springs that close each intake and exhaust valve. Typical signs include a sagging corner, a broken coil, or a clunk from the spring pocket. Replace springs in axle pairs and inspect the seats.

Valve Spring Retainer

Brand Part Number Markets Notes Buy
SBI Fits: 7.3L V8 1611084
🇺🇸 US 🇨🇦 CA
Intake and ExhaustRetainer
View on
Amazon

This table covers the Valve Spring retainers.

Valve Spring Retainer Keeper

Brand Part Number Markets Notes Buy
SBI Fits: 7.3L V8 1211083
🇺🇸 US 🇨🇦 CA
Intake and Exhaust0.2940 Length
Fitment notes — SBI 1211083
Intake and Exhaust0.2940 Length3 Round bead type0.2550 I.D.
View on
Amazon

This table covers the keepers that lock each valve-spring retainer to the stem.

Valve Stem Seal

Brand Part Number Markets Notes Buy
MAHLE / CLEVITE Fits: 7.3L V8 SS46156
🇺🇸 US 🇨🇦 CA
FluoroelastomerContains 16 PCS
Fitment notes — MAHLE / CLEVITE SS46156
FluoroelastomerContains 16 PCS
Intake and ExhaustPositive Type
View on
Amazon
SBI Fits: 7.3L V8 1221519
🇺🇸 US 🇨🇦 CA
Intake and ExhaustViton Material
Fitment notes — SBI 1221519
Intake and ExhaustViton MaterialPositive TypeTop Hat Style5/16 Nominal Stem Diameter
View on
Amazon

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Buying Engine Parts for a 2021 Ford F-650

On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.

  • Match the engine first. Every engine part here is engine-specific; each row shows which engine(s) it fits.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Oil Filter and Camshaft Bearing .

Frequently Asked Questions

How many engine parts fit the 2021 Ford F-650?

Our catalog currently lists 61 engine parts for the 2021 Ford F-650 across 34 subcategories and 14 brands, covering both the 6.7L V8 DIESEL Turbocharged and the 7.3L V8. Each part is matched to the engine(s) it fits.

Do engine parts differ between 2021 Ford F-650 engines?

Yes. Every engine part on this page is engine-specific. Each row shows which engine(s) it fits — use the filter at the top to hide the rest. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.

What are the signs of engine problems on a 2021 Ford F-650?

Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What should I replace at the same time?

Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2021 Ford F-650 was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 2021 Ford F-650?

First match the engine — each row shows which engine(s) the part fits. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 2021 Ford F-650

Engine Parts for Other Ford F-650 Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.