2023 Ford F-650 Engine Parts

Engine:

Showing parts for every engine. Select an engine to see only what fits.

115 Engine parts are listed for the 2023 Ford F-650, in 43 part types, covering both the 6.7L V8 DIESEL Turbocharged and the 7.3L V8. Each one has a brand, a manufacturer part number and notes that say where it fits.

On the 2023 Ford F-650, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. 32 parts of the 115 listed are Oil Filter (19 parts), Oil (7 parts) and Camshaft Bearing (6 parts). The other 40 part types cover the remaining 83 parts.

Camshaft Bearing

Brand Part Number Markets Notes Buy
DURA-BOND Popular Fits: 7.3L V8 FP35T
🇺🇸 US 🇨🇦 CA
Coated
View on
Amazon
DURA-BOND Fits: 7.3L V8 FP351T
🇺🇸 US 🇨🇦 CA
Coated
View on
Amazon
DURA-BOND Fits: 7.3L V8 FP352T
🇺🇸 US 🇨🇦 CA
Coated
View on
Amazon
DURA-BOND Fits: 7.3L V8 FP353T
🇺🇸 US 🇨🇦 CA
Coated
View on
Amazon
DURA-BOND Fits: 7.3L V8 FP354T
🇺🇸 US 🇨🇦 CA
Coated
View on
Amazon
ENGINE PRO Fits: 6.7L V8 DIESEL Turbocharged 152232
🇺🇸 US 🇨🇦 CA
View on
Amazon

This table covers the Camshaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.

Conversion / Lower Gasket Set

Brand Part Number Markets Notes Buy
MAHLE / CLEVITE Fits: 7.3L V8 CS55516
🇺🇸 US 🇨🇦 CA
View on
Amazon

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.

Crankshaft Seal

Brand Part Number Markets Notes Buy
MAHLE / CLEVITE Fits: 7.3L V8 68115
🇺🇸 US 🇨🇦 CA
Fluoroelastomer
Fitment notes — MAHLE / CLEVITE 68115
Fluoroelastomer
Rear
View on
Amazon

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Crankshaft Seal Gasket

Brand Part Number Markets Notes Buy
MAHLE / CLEVITE Fits: 7.3L V8 B33824
🇺🇸 US 🇨🇦 CA
Crankshaft Seal Retainer GasketMolded Rubber
Fitment notes — MAHLE / CLEVITE B33824
Crankshaft Seal Retainer GasketMolded RubberRear
View on
Amazon

This table covers the gaskets that seal the Crankshaft Seal. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Cylinder Head

Brand Part Number Markets Notes Buy
ENGINE PRO Fits: 6.7L V8 DIESEL Turbocharged 910092
🇺🇸 US 🇨🇦 CA
BareDoes not include Valves, Cam, or Springs
Fitment notes — ENGINE PRO 910092
BareDoes not include Valves, Cam, or Springs
Powerstroke2011-Up C# RFHC30-6C064AA Left Side
View on
Amazon
ENGINE PRO Fits: 6.7L V8 DIESEL Turbocharged 910093
🇺🇸 US 🇨🇦 CA
BareDoes not include Valves, Cam, or Springs
Fitment notes — ENGINE PRO 910093
BareDoes not include Valves, Cam, or Springs
RightPowerstroke EngineCasting#: RF3Z306090CC
View on
Amazon
QUALCAST Fits: 6.7L V8 DIESEL Turbocharged 16267001R
🇺🇸 US 🇨🇦 CA
RightAluminum Right OE New Bare with Seats, Guides, Injector Tubes
View on
Amazon
QUALCAST Fits: 6.7L V8 DIESEL Turbocharged 16267001L
🇺🇸 US 🇨🇦 CA
LeftAluminum Left OE New Bare with Seats, Guides, Injector Tubes
View on
Amazon

This table covers the cylinder heads that close the top of the block.

Cylinder Head Alignment Dowel Pin

Brand Part Number Markets Notes Buy
MAHLE / CLEVITE Fits: 7.3L V8 GS34087
🇺🇸 US 🇨🇦 CA
SteelContains 2 Pieces
Fitment notes — MAHLE / CLEVITE GS34087
SteelContains 2 Pieces
16mm Straight Dowel Pin
View on
Amazon

This table covers the Cylinder Head Alignment Dowel pins.

Cylinder Head Bolt

Brand Part Number Markets Notes Buy
MAHLE / CLEVITE Fits: 6.7L V8 DIESEL Turbocharged GS33693
🇺🇸 US 🇨🇦 CA
Cylinder Head Bolt KitSet
View on
Amazon
MAHLE / CLEVITE Fits: 7.3L V8 GS34082
🇺🇸 US 🇨🇦 CA
Cylinder Head Bolt KitSet
View on
Amazon

This table covers the bolts that clamp the cylinder head to the block.

Cylinder Head Gasket

Brand Part Number Markets Notes Buy
MAHLE / CLEVITE Fits: 7.3L V8 55517
🇺🇸 US 🇨🇦 CA
Multi-Layered Steel
Fitment notes — MAHLE / CLEVITE 55517
Multi-Layered Steel
Right
View on
Amazon
MAHLE / CLEVITE Fits: 7.3L V8 55516
🇺🇸 US 🇨🇦 CA
Multi-Layered Steel
Fitment notes — MAHLE / CLEVITE 55516
Multi-Layered Steel
Left
View on
Amazon

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Cylinder Head Gasket Set

Brand Part Number Markets Notes Buy
MAHLE / CLEVITE Fits: 7.3L V8 HS55516
🇺🇸 US 🇨🇦 CA
Includes Valve Stem Seals
Fitment notes — MAHLE / CLEVITE HS55516
Includes Valve Stem Seals
Exhaust Manifold Gaskets Not IncludedCylinder Head Bolt Replacement recommended
View on
Amazon
MOTORCRAFT Fits: 6.7L V8 DIESEL Turbocharged EVG4
🇺🇸 US 🇨🇦 CA
Head Gaskets and Head Bolts Must be Ordered Separately
View on
Amazon

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.

Cylinder Head Temperature Sensor

Brand Part Number Markets Notes Buy
STANDARD MOTOR PRODUCTS Fits: 7.3L V8 TX365
🇺🇸 US 🇨🇦 CA
View on
Amazon

This table covers the Cylinder Head temperature sensors. Typical signs include hard cold starts, a fan that never comes on, or a gauge that disagrees with the scan tool. A sensor that reads open or shorted is usually the part; an implausible-but-smooth reading can be wiring.

Exhaust Valve

Brand Part Number Markets Notes Buy
QUALCAST Fits: 6.7L V8 DIESEL Turbocharged 10VKFOR67A5
🇺🇸 US 🇨🇦 CA
Intake and Exhaust Valve Kit
Fitment notes — QUALCAST 10VKFOR67A5
Intake and Exhaust Valve Kit
Kit For Assembly with 32 Valves, Springs, Stem Seals, Retainers, 64 Keepers
View on
Amazon
QUALCAST Fits: 7.3L V8 1013512
🇺🇸 US 🇨🇦 CA
1.670 Head Diameter. 0.312 stem. 5.690 OAL. 3G
View on
Amazon
SBI Fits: 6.7L V8 DIESEL Turbocharged 13266
🇺🇸 US 🇨🇦 CA
Superalloy
View on
Amazon
SBI Fits: 7.3L V8 13512
🇺🇸 US 🇨🇦 CA
Hollow Stem
View on
Amazon

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one.

Harmonic Balancer

Brand Part Number Markets Notes Buy
DAYCO Fits: 6.7L V8 DIESEL Turbocharged PB1645N
🇺🇸 US 🇨🇦 CA
Premium
View on
Amazon

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine.

Intake Manifold Gasket

Brand Part Number Markets Notes Buy
MAHLE / CLEVITE Fits: 7.3L V8 MS20624
🇺🇸 US 🇨🇦 CA
SetMolded Rubber
View on
Amazon
MOTORCRAFT Fits: 6.7L V8 DIESEL Turbocharged GSKI8
🇺🇸 US 🇨🇦 CA
Contains Mandatory Replacing Parts For Installing Engine ASY.
View on
Amazon

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Intake Valve

Brand Part Number Markets Notes Buy
QUALCAST Fits: 7.3L V8 1013511
🇺🇸 US 🇨🇦 CA
2.163 Head DIA. 0.313 Stem. 5.743 OAL. 3G.
View on
Amazon
SBI Fits: 6.7L V8 DIESEL Turbocharged 13265
🇺🇸 US 🇨🇦 CA
View on
Amazon
SBI Fits: 7.3L V8 13511
🇺🇸 US 🇨🇦 CA
Hollow Stem
View on
Amazon

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one.

Oil

Summary: Notes list SAE 10W-30 and SAE 15W-40. Confirm the engine and the weight on the filler cap before you buy. Replacement brands in this table include VALVOLINE and MOTORCRAFT.

Full Synthetic

Brand Part Number Markets Notes Buy
VALVOLINE Fits: 6.7L V8 DIESEL Turbocharged 909772
🇺🇸 US
Heavy Duty Full Synthetic SAE 15W-40 DIESEL1 Gallon
Fitment notes — VALVOLINE 909772
Heavy Duty Full Synthetic SAE 15W-40 DIESEL1 Gallon
Fits:
300
or:
270
or:
330
View on
Amazon

Heavy Duty / Diesel

Brand Part Number Markets Notes Buy
MOTORCRAFT Popular Fits: 6.7L V8 DIESEL Turbocharged XO10W30QSDF
🇺🇸 US 🇨🇦 CA
Super Duty DieselSAE 10W-30
Fitment notes — MOTORCRAFT XO10W30QSDF
Super Duty DieselSAE 10W-301 Quart
Ambient Temperature Rating: Above 0 Degrees (F) / -18 Degrees (C)
View on
Amazon
MOTORCRAFT Popular Fits: 6.7L V8 DIESEL Turbocharged XO10W305Q3SD
🇺🇸 US 🇨🇦 CA
Super Duty DieselSAE 10W-30
Fitment notes — MOTORCRAFT XO10W305Q3SD
Super Duty DieselSAE 10W-305 Quart
Ambient Temperature Rating: Above 0 Degrees (F) / -18 Degrees (C)
View on
Amazon
VALVOLINE Fits: 6.7L V8 DIESEL Turbocharged 909778
🇺🇸 US
Heavy Duty Conventional SAE 15W-40 DIESEL1 Gallon
Fitment notes — VALVOLINE 909778
Heavy Duty Conventional SAE 15W-40 DIESEL1 Gallon
Fits:
300
or:
270
or:
330
View on
Amazon

Synthetic Blend

Brand Part Number Markets Notes Buy
VALVOLINE Fits: 6.7L V8 DIESEL Turbocharged 909766
🇺🇸 US
Heavy Duty Synthetic Blend SAE 15W-40 DIESEL1 Gallon
Fitment notes — VALVOLINE 909766
Heavy Duty Synthetic Blend SAE 15W-40 DIESEL1 Gallon
Fits:
300
or:
270
or:
330
View on
Amazon
VALVOLINE Fits: 6.7L V8 DIESEL Turbocharged 909776
🇺🇸 US
Heavy Duty Synthetic Blend SAE 10W-30 DIESEL1 Gallon
Fitment notes — VALVOLINE 909776
Heavy Duty Synthetic Blend SAE 10W-30 DIESEL1 Gallon
Fits:
300
or:
270
or:
330
View on
Amazon
VALVOLINE Fits: 6.7L V8 DIESEL Turbocharged 909782
🇺🇸 US
Heavy Duty Synthetic Blend SAE 15W-40 DIESEL2.5 Gallon
Fitment notes — VALVOLINE 909782
Heavy Duty Synthetic Blend SAE 15W-40 DIESEL2.5 Gallon
Fits:
300
or:
270
or:
330
View on
Amazon

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable.

Oil Cooler

Brand Part Number Markets Notes Buy
MOTORCRAFT Fits: 7.3L V8 YOC32
🇺🇸 US 🇨🇦 CA
Includes Filter
View on
Amazon
STANDARD MOTOR PRODUCTS Fits: 6.7L V8 DIESEL Turbocharged OCK112
🇺🇸 US 🇨🇦 CA
View on
Amazon

This table covers the heat exchangers that cool engine oil. Typical signs include oil at the cooler fittings, or coolant that looks like a milkshake. Pressure-test both circuits after a cooler swap — a leak here mixes oil and coolant.

Oil Cooler Gasket

Brand Part Number Markets Notes Buy
MAHLE / CLEVITE Fits: 7.3L V8 GS34083
🇺🇸 US 🇨🇦 CA
Engine Oil Cooler Gasket Set
View on
Amazon

This table covers the gaskets that seal the Oil Cooler. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Oil Dipstick / Tube

Brand Part Number Markets Notes Buy
MOTORCRAFT Fits: 6.7L V8 DIESEL Turbocharged EDPST38
🇺🇸 US 🇨🇦 CA
Engine Oil Dipstick TubeTube Only
View on
Amazon
MOTORCRAFT Fits: 6.7L V8 DIESEL Turbocharged EDPS69
🇺🇸 US 🇨🇦 CA
Engine Oil DipstickDipstick Only
View on
Amazon
MOTORCRAFT Fits: 7.3L V8 EDPST42
🇺🇸 US 🇨🇦 CA
Engine Oil Dipstick TubeTube Only
View on
Amazon
MOTORCRAFT Fits: 7.3L V8 EDPS68
🇺🇸 US 🇨🇦 CA
Engine Oil DipstickDipstick Only
View on
Amazon
MOTORCRAFT Fits: 7.3L V8 EDPST2
🇺🇸 US 🇨🇦 CA
Engine Oil Dipstick TubeTube Only
Fitment notes — MOTORCRAFT EDPST2
Engine Oil Dipstick TubeTube Only
Extension
View on
Amazon

This table covers the Oil Dipstick tubes.

Oil Drain Plug

Brand Part Number Markets Notes Buy
DORMAN Fits: 6.7L V8 DIESEL Turbocharged 090053
🇺🇸 US 🇨🇦 CA
MetalPilot Point
Fitment notes — DORMAN 090053
MetalPilot PointM14-1.50Head Size 16MM
M14 x 1.50 Thread
View on
Amazon
DORMAN Fits: 6.7L V8 DIESEL Turbocharged 090161
🇺🇸 US 🇨🇦 CA
MetalPilot Point
Fitment notes — DORMAN 090161
MetalPilot PointM14-1.5Head Size 16MM
M14 x 1.50 Thread
View on
Amazon
DORMAN Fits: 7.3L V8 090175
🇺🇸 US 🇨🇦 CA
Integrated GasketM12 x 1.75 Thread
View on
Amazon
SKP Fits: 6.7L V8 DIESEL Turbocharged SK090053CD
🇺🇸 US 🇨🇦 CA
Metal
Fitment notes — SKP SK090053CD
Metal
16 mm HeadThread Pitch: 1.5 mm
View on
Amazon

This table covers the drain plugs in the oil pan.

Oil Drain Plug Gasket

Brand Part Number Markets Notes Buy
MAHLE / CLEVITE Fits: 7.3L V8 B33828
🇺🇸 US 🇨🇦 CA
Molded Rubber
Fitment notes — MAHLE / CLEVITE B33828
Molded Rubber
M11 or 7/16 IN Drain Plug Gasket Size
View on
Amazon

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Oil Filler Cap

Brand Part Number Markets Notes Buy
MOTORCRAFT Fits: 6.7L V8 DIESEL Turbocharged EC802
🇺🇸 US 🇨🇦 CA
Cap Assy - Oil Filter
View on
Amazon
MOTORCRAFT Fits: 7.3L V8 EC791
🇺🇸 US 🇨🇦 CA
SAE-5W30
View on
Amazon

This table covers the caps on the oil filler neck.

Oil Filter

Economy

Brand Part Number Markets Notes Buy
BOSCH Fits: 6.7L V8 DIESEL Turbocharged 72400WS
🇺🇸 US 🇨🇦 CA
Workshop Oil Filter
View on
Amazon
BOSCH Fits: 7.3L V8 72227WS
🇺🇸 US 🇨🇦 CA
Workshop Oil Filter
View on
Amazon
ULTRA-POWER Fits: 6.7L V8 DIESEL Turbocharged 57151
🇺🇸 US 🇨🇦 CA
OE# LF17494
View on
Amazon
VARIOUS MFR Fits: 6.7L V8 DIESEL Turbocharged PG6128
🇺🇸 US 🇨🇦 CA
View on
Amazon
VARIOUS MFR Fits: 7.3L V8 PG4651
🇺🇸 US 🇨🇦 CA
View on
Amazon

High Performance / Heavy Duty

Brand Part Number Markets Notes Buy
MOBIL Popular Fits: 6.7L V8 DIESEL Turbocharged M1405A
🇺🇸 US 🇨🇦 CA
Extended Performance
View on
Amazon
MOBIL Fits: 7.3L V8 M1210A
🇺🇸 US 🇨🇦 CA
Extended Performance
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
MOTORCRAFT Popular Fits: 6.7L V8 DIESEL Turbocharged FL2124S
🇺🇸 US 🇨🇦 CA
Oil Cooler and FilterSilicone
View on
Amazon
MOTORCRAFT Popular Fits: 7.3L V8 FL820S
🇺🇸 US 🇨🇦 CA
View on
Amazon
WIX Popular Fits: 6.7L V8 DIESEL Turbocharged 57151
🇺🇸 US 🇨🇦 CA
View on
Amazon
WIX Popular Fits: 7.3L V8 51372
🇺🇸 US 🇨🇦 CA
Part may be slightly shorter than OE old design due to product update.
View on
Amazon
ACDELCO Fits: 6.7L V8 DIESEL Turbocharged PF67
🇺🇸 US 🇨🇦 CA
Gold / Professional
View on
Amazon
BOSCH Fits: 6.7L V8 DIESEL Turbocharged 3973
🇺🇸 US 🇨🇦 CA
Premium Oil Filter
View on
Amazon
BOSCH Fits: 7.3L V8 3410
🇺🇸 US 🇨🇦 CA
Premium Oil Filter
View on
Amazon
DONALDSON Fits: 6.7L V8 DIESEL Turbocharged P502503
🇺🇸 US 🇨🇦 CA
Lube filter, Spin-On full flowMedia Type: Synthetic
View on
Amazon
FRAM Fits: 6.7L V8 DIESEL Turbocharged PH10890
🇺🇸 US 🇨🇦 CA
Extra Guard
View on
Amazon
HASTINGS / BALDWIN Fits: 6.7L V8 DIESEL Turbocharged LF651
🇺🇸 US 🇨🇦 CA
View on
Amazon
HASTINGS / BALDWIN Fits: 7.3L V8 LF110
🇺🇸 US 🇨🇦 CA
View on
Amazon
VARIOUS MFR Fits: 7.3L V8 PG4651EX
🇺🇸 US 🇨🇦 CA
Extended Life
View on
Amazon

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive.

Oil Pan

Brand Part Number Markets Notes Buy
DORMAN Popular Fits: 6.7L V8 DIESEL Turbocharged 264452
🇺🇸 US 🇨🇦 CA
Lower
View on
Amazon
AUTOTECNICA Fits: 6.7L V8 DIESEL Turbocharged FD1421561
🇺🇸 US 🇨🇦 CA
Includes Gasket
View on
Amazon
SKP Fits: 6.7L V8 DIESEL Turbocharged SK264452
🇺🇸 US 🇨🇦 CA
Includes Drain Plug
Fitment notes — SKP SK264452
Includes Drain Plug
Lower
View on
Amazon
SKP Fits: 6.7L V8 DIESEL Turbocharged SK103494
🇺🇸 US 🇨🇦 CA
Upperwith Grooves
Fitment notes — SKP SK103494
Upperwith Grooveswithout Gaskets & Seals
View on
Amazon
SPECTRA PREMIUM Fits: 6.7L V8 DIESEL Turbocharged FP64A
🇺🇸 US 🇨🇦 CA
Lower
View on
Amazon

This table covers the oil pans that hold the engine's oil sump.

Oil Pan Gasket

Brand Part Number Markets Notes Buy
MAHLE / CLEVITE Fits: 6.7L V8 DIESEL Turbocharged OS32438
🇺🇸 US 🇨🇦 CA
Beaded Paper
Fitment notes — MAHLE / CLEVITE OS32438
Beaded Paper
Lowerwith Steel Oil Pan
View on
Amazon
MAHLE / CLEVITE Fits: 7.3L V8 OS32453
🇺🇸 US 🇨🇦 CA
View on
Amazon

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Oil Pressure Relief Valve Gasket

Brand Part Number Markets Notes Buy
MAHLE / CLEVITE Fits: 7.3L V8 GS34085
🇺🇸 US 🇨🇦 CA
Molded Rubber
Fitment notes — MAHLE / CLEVITE GS34085
Molded Rubber
Oil Return Tube O-Ring Set
View on
Amazon

This table covers the gaskets that seal the Oil Pressure Relief Valve. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Oil Pump Control Valve / Solenoid

Brand Part Number Markets Notes Buy
DORMAN Fits: all 2023 F-650 engines 926542
🇺🇸 US 🇨🇦 CA
View on
Amazon
STANDARD MOTOR PRODUCTS Fits: all 2023 F-650 engines OPS407
🇺🇸 US 🇨🇦 CA
View on
Amazon

This table covers the Oil Pump Control Valve solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid.

Push Rod

Brand Part Number Markets Notes Buy
SBI Fits: 7.3L V8 1901556
🇺🇸 US 🇨🇦 CA
Intake and Exhaust8.415 Length
Fitment notes — SBI 1901556
Intake and Exhaust8.415 Length375X075 Diameter/Wall
View on
Amazon

This table covers the pushrods that transfer lifter motion to the rocker arms.

Timing Cover Gasket

Brand Part Number Markets Notes Buy
MAHLE / CLEVITE Fits: 7.3L V8 JV5289
🇺🇸 US 🇨🇦 CA
Set
View on
Amazon

This table covers the gaskets that seal the Timing Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Timing Cover Seal

Brand Part Number Markets Notes Buy
MAHLE / CLEVITE Fits: 7.3L V8 68114
🇺🇸 US 🇨🇦 CA
PTFE (Polytetrafluoroethylene)
View on
Amazon

This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Turbocharger

Brand Part Number Markets Notes Buy
GPD Fits: 6.7L V8 DIESEL Turbocharged 2513009
🇺🇸 US 🇨🇦 CA
View on
Amazon
MOTORCRAFT Fits: 6.7L V8 DIESEL Turbocharged TC42
🇺🇸 US 🇨🇦 CA
ChassisTurbo Actuator Only Service In Turbo Assembly
View on
Amazon

This table covers the turbochargers that compress intake air.

Turbocharger Coolant Line

Brand Part Number Markets Notes Buy
STANDARD MOTOR PRODUCTS Fits: 6.7L V8 DIESEL Turbocharged TIH58
🇺🇸 US 🇨🇦 CA
Supply
View on
Amazon

This table covers the Turbocharger Coolant lines. Typical signs include a wet fitting, a rusted pipe, or a pressure loss in this circuit. Flare or thread the new line the way the notes specify; a kinked replacement will fail early.

Turbocharger Gasket

Brand Part Number Markets Notes Buy
GPD Fits: 6.7L V8 DIESEL Turbocharged 2535120
🇺🇸 US 🇨🇦 CA
Only Fits Compatible Aftermarket Turbochargers
View on
Amazon
MAHLE / CLEVITE Fits: 6.7L V8 DIESEL Turbocharged F33386
🇺🇸 US 🇨🇦 CA
Beaded Steel
Fitment notes — MAHLE / CLEVITE F33386
Beaded Steel
Turbocharger Mounting Gasket
View on
Amazon

This table covers the gaskets that seal the Turbocharger. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Turbocharger Mounting Hardware

Brand Part Number Markets Notes Buy
MOTORCRAFT Fits: 6.7L V8 DIESEL Turbocharged PTC9
🇺🇸 US 🇨🇦 CA
Service Turbo without Oil Tube - Will Use HC3Z-9T514-A Kit. This Includes 6 Hole Gasket & Filter.
View on
Amazon
MOTORCRAFT Fits: 6.7L V8 DIESEL Turbocharged PTC10
🇺🇸 US 🇨🇦 CA
View on
Amazon

This table covers the fasteners that mount the turbocharger.

Turbocharger Oil Filter

Brand Part Number Markets Notes Buy
DORMAN Fits: 6.7L V8 DIESEL Turbocharged 667656
🇺🇸 US 🇨🇦 CA
Boost Pressure Solenoid Filter
View on
Amazon

This table covers the Turbocharger Oil filters. Typical signs include restricted flow — long cranking, weak airflow, or dirty fluid after a short interval. Seat the new filter so it cannot bypass, and use the grade the notes call for.

Turbocharger Oil Line

Brand Part Number Markets Notes Buy
MOTORCRAFT Fits: 6.7L V8 DIESEL Turbocharged OSL17
🇺🇸 US 🇨🇦 CA
Tube - Oil FeedSupply Line
View on
Amazon

This table covers the Turbocharger Oil lines. Typical signs include a wet fitting, a rusted pipe, or a pressure loss in this circuit. Flare or thread the new line the way the notes specify; a kinked replacement will fail early.

Valve Cover Gasket

Brand Part Number Markets Notes Buy
MAHLE / CLEVITE Fits: 7.3L V8 VS50977S
🇺🇸 US 🇨🇦 CA
Molded Rubber
View on
Amazon
MAHLE / CLEVITE Fits: 7.3L V8 VS50977
🇺🇸 US 🇨🇦 CA
Set
Fitment notes — MAHLE / CLEVITE VS50977
Set
Use with # GS34084
View on
Amazon

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Valve Cover Grommet

Brand Part Number Markets Notes Buy
MAHLE / CLEVITE Fits: 7.3L V8 GS34084
🇺🇸 US 🇨🇦 CA
Contains 10 pcsKit
Fitment notes — MAHLE / CLEVITE GS34084
Contains 10 pcsKitSetMolded Rubber
View on
Amazon

This table covers the Valve Cover grommets.

Valve Guide

Brand Part Number Markets Notes Buy
QUALCAST Fits: 7.3L V8 303229
🇺🇸 US 🇨🇦 CA
2.240 OAL. 0.3146 I.D. 0.5145 O.D.
View on
Amazon
SBI Fits: 6.7L V8 DIESEL Turbocharged 1403163
🇺🇸 US 🇨🇦 CA
Intake and Exhaust0.2764 I.D.
Fitment notes — SBI 1403163
Intake and Exhaust0.2764 I.D.0.4725 O.D.2.150 Length1-P Type
View on
Amazon
SBI Fits: 7.3L V8 1403229
🇺🇸 US 🇨🇦 CA
Intake and Exhaust0.3146 I.D.
Fitment notes — SBI 1403229
Intake and Exhaust0.3146 I.D.0.5145 O.D.2.240 Length1-P TypeNote: Install I.D. Chamfer Towards Cumbustion Chamber
View on
Amazon

This table covers the pressed-in bronze and cast-iron guides that align valve stems. Typical signs include oil smoke on startup, a guide that has gone oval, or a valve that no longer seats quietly. Guides are a machine-shop fit. Confirm stem diameter in the notes before ordering.

Valve Seat

Brand Part Number Markets Notes Buy
QUALCAST Fits: 7.3L V8 21175050N
🇺🇸 US 🇨🇦 CA
INSERT
Fitment notes — QUALCAST 21175050N
INSERT
Exhaust1.406T Inner Diameter 1.750 Outer Diameter 0.250 Depth. Nickel
View on
Amazon
QUALCAST Fits: 7.3L V8 21218751
🇺🇸 US 🇨🇦 CA
INSERT
Fitment notes — QUALCAST 21218751
INSERT
Intake1.950T I.D. 2.187 O.D. 0.250 Depth
View on
Amazon
SBI Fits: 7.3L V8 SB218751
🇺🇸 US 🇨🇦 CA
Intake2-3/16 O.D.
Fitment notes — SBI SB218751
Intake2-3/16 O.D.1.950T I.D.0.2250 Depth
View on
Amazon
SBI Fits: 7.3L V8 SB175070N
🇺🇸 US 🇨🇦 CA
Non-Magnetic
Fitment notes — SBI SB175070N
Non-Magnetic
Exhaust1-3/4 O.D.1.406T I.D.1/4 Depth
View on
Amazon

This table covers the Valve seats.

Valve Spring

Brand Part Number Markets Notes Buy
SBI Fits: 6.7L V8 DIESEL Turbocharged 1601616
🇺🇸 US 🇨🇦 CA
Intake and Exhaust1.979 Length
Fitment notes — SBI 1601616
Intake and Exhaust1.979 Length1.020T O.D.0.714T I.DConical
View on
Amazon
SBI Fits: 7.3L V8 1601710
🇺🇸 US 🇨🇦 CA
Exhaust2.821 Length
Fitment notes — SBI 1601710
Exhaust2.821 Length1.250T O.D.0.822T I.DConicalNote: with Green StripeAlso Services Spring with Purple Stripe
View on
Amazon
SBI Fits: 7.3L V8 1601709
🇺🇸 US 🇨🇦 CA
Intake2.679 Length
Fitment notes — SBI 1601709
Intake2.679 Length1.267T O.D.0.822T I.DConicalNote: with Yellow StripeAlso Services Spring with Pink Stripe
View on
Amazon

This table covers the springs that close each intake and exhaust valve. Typical signs include a sagging corner, a broken coil, or a clunk from the spring pocket. Replace springs in axle pairs and inspect the seats.

Valve Spring Retainer

Brand Part Number Markets Notes Buy
SBI Fits: 6.7L V8 DIESEL Turbocharged 1611080
🇺🇸 US 🇨🇦 CA
Retainer Description
View on
Amazon
SBI Fits: 7.3L V8 1611084
🇺🇸 US 🇨🇦 CA
Intake and ExhaustRetainer
View on
Amazon

This table covers the Valve Spring retainers.

Valve Spring Retainer Keeper

Brand Part Number Markets Notes Buy
SBI Fits: 6.7L V8 DIESEL Turbocharged 1211084
🇺🇸 US 🇨🇦 CA
Intake and Exhaust0.2900 Length
Fitment notes — SBI 1211084
Intake and Exhaust0.2900 Length3 Round bead type0.2180 I.D.
View on
Amazon
SBI Fits: 7.3L V8 1211083
🇺🇸 US 🇨🇦 CA
Intake and Exhaust0.2940 Length
Fitment notes — SBI 1211083
Intake and Exhaust0.2940 Length3 Round bead type0.2550 I.D.
View on
Amazon

This table covers the keepers that lock each valve-spring retainer to the stem.

Valve Stem Seal

Brand Part Number Markets Notes Buy
MAHLE / CLEVITE Fits: 6.7L V8 DIESEL Turbocharged SS46062
🇺🇸 US 🇨🇦 CA
FluoroelastomerContains 32 PCS
Fitment notes — MAHLE / CLEVITE SS46062
FluoroelastomerContains 32 PCS
Intake and ExhaustPositive Type
View on
Amazon
MAHLE / CLEVITE Fits: 7.3L V8 SS46156
🇺🇸 US 🇨🇦 CA
FluoroelastomerContains 16 PCS
Fitment notes — MAHLE / CLEVITE SS46156
FluoroelastomerContains 16 PCS
Intake and ExhaustPositive Type
View on
Amazon
SBI Fits: 6.7L V8 DIESEL Turbocharged 1221441
🇺🇸 US 🇨🇦 CA
Intake and ExhaustViton Material
Fitment notes — SBI 1221441
Intake and ExhaustViton MaterialPositive TypeTop Hat Style7 mm Nominal Stem Diameter
View on
Amazon
SBI Fits: 7.3L V8 1221519
🇺🇸 US 🇨🇦 CA
Intake and ExhaustViton Material
Fitment notes — SBI 1221519
Intake and ExhaustViton MaterialPositive TypeTop Hat Style5/16 Nominal Stem Diameter
View on
Amazon

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Buying Engine Parts for a 2023 Ford F-650

On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.

  • Match the engine first. Some engine parts fit every engine; others are engine-specific. Each row shows which engine(s) it fits.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Oil Filter and Oil .

Frequently Asked Questions

How many engine parts fit the 2023 Ford F-650?

Our catalog currently lists 115 engine parts for the 2023 Ford F-650 across 43 subcategories and 23 brands, covering both the 6.7L V8 DIESEL Turbocharged and the 7.3L V8. Each part is matched to the engine(s) it fits.

Do engine parts differ between 2023 Ford F-650 engines?

Some do. 2 parts fit every engine; the other 113 are engine-specific. Each row (and the filter at the top) shows which. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.

What are the signs of engine problems on a 2023 Ford F-650?

Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What oil viscosity is listed for the 2023 Ford F-650?

Oil rows on this page include SAE 10W-30 and SAE 15W-40. Confirm the engine and the weight on the filler cap before you buy — high-mileage and standard fills can differ.

What should I replace at the same time?

Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2023 Ford F-650 was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 2023 Ford F-650?

First match the engine — each row shows which engine(s) the part fits. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 2023 Ford F-650

Engine Parts for Other Ford F-650 Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.