1993 Geo Tracker Drivetrain Parts

This table covers the Axle Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

5 Axle Shaft Bearing parts are listed for the 1993 Geo Tracker, from WJB / INMOTION PARTS, BCA, SCHAEFFLER and 2 other brands. WJB / INMOTION PARTS RB62062RS carries the "Popular" badge.

In the Economy grade, WJB / INMOTION PARTS supplies 1 part: the catalog's value-priced group. A representative part number is WJB / INMOTION PARTS RB62062RS.

The Standard Replacement section lists 4 options from BCA, SCHAEFFLER, SKF and 1 other brand — built to original-equipment specification. BCA NB206FF is listed in this group.

Listed part numbers: WJB / INMOTION PARTS RB62062RS, BCA NB206FF and SCHAEFFLER 62062RSR, plus the other parts above.

This table covers the seals where an axle shaft exits the housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

6 Axle Shaft Seal parts for the 1993 Geo Tracker come from 6 brands — NATIONAL, WJB / INMOTION PARTS, BCA and 3 other brands. The "Popular" part is NATIONAL 223553.

Listed part numbers: NATIONAL 223553, WJB / INMOTION PARTS WS223553 and BCA NS223553, plus the other parts above.

This table covers the complete CV axle shafts from differential (or hub) to wheel. Typical signs include a click in tight turns, grease flung around the wheel well, or a vibration that builds with speed. A torn boot caught early is a boot kit; caught late it is the whole axle. Torque the axle nut to the method in the notes. Read more

5 CV Axle parts for the 1993 Geo Tracker come from 4 brands — TRAKMOTIVE, CARDONE, GSP and 1 other brand. The "Popular" part is TRAKMOTIVE SK8013.

The Economy section: 1 option from CARDONE. CARDONE 601085 is listed in this group.

Standard Replacement: 4 parts, from TRAKMOTIVE, GSP and TOP NOTCH. A representative part number is TRAKMOTIVE SK8013.

Listed part numbers: TRAKMOTIVE SK8013, CARDONE 601085 and GSP NCV68010, plus the other parts above.

This table covers the boots that keep grease in a CV joint. Typical signs include a split boot, grease flung around the joint, or a click once grit is inside. A boot caught early is a kit. Once the joint has clicked, the joint itself is usually worn. Read more

7 CV Joint Boot parts for the 1993 Geo Tracker come from 3 brands — DORMAN, BECK/ARNLEY and MEVOTECH. The "Popular" part is BECK/ARNLEY 1032824.

Part numbers include BECK/ARNLEY 1032824, MEVOTECH DX818 and BECK/ARNLEY 1032624, among others listed above.

This table covers the bearings and races that support the differential carrier. Read more

11 Differential Carrier Bearing / Race parts for the 1993 Geo Tracker come from 6 brands — TIMKEN, SCHAEFFLER, SKF and 3 other brands. The "Popular" part is NATIONAL KC11445Y.

The Economy section: 1 option from WJB / INMOTION PARTS. WJB / INMOTION PARTS WTKC11445Y is listed in this group.

Standard Replacement: 10 parts, from TIMKEN, SCHAEFFLER, SKF and 2 other brands. A representative part number is NATIONAL KC11445Y.

This table covers the bearings and races on the differential pinion. Read more

11 Differential Pinion Bearing / Race parts are listed for the 1993 Geo Tracker, from TIMKEN, WJB / INMOTION PARTS, BCA and 2 other brands. WJB / INMOTION PARTS WT30306 carries the "Popular" badge.

Economy: 2 parts, from WJB / INMOTION PARTS. A representative part number is WJB / INMOTION PARTS WT30306.

The Standard Replacement section: 9 options from TIMKEN, BCA, SCHAEFFLER and 1 other brand. BCA NB30306 is listed in this group.

This table covers the wear sleeves used to restore a grooved pinion seal surface. Read more

This group shows a single part: SKF 99147.

This table covers the seals at the differential pinion yoke. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

6 Differential Pinion Seal parts for the 1993 Geo Tracker come from 6 brands — SKF, TIMKEN, BCA and 3 other brands. The "Popular" part is SKF 14762.

This group includes SKF 14762, TIMKEN 710523 and BCA NS710523 and the remaining parts above.

This table covers the seals at the Differential. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 1993 Geo Tracker — ELRING 722590.

This table covers the gear oils specified for the axle or transfer case. Typical signs include a low-oil lamp, knocking, or oil that has gone thin before the next interval. Match the viscosity and spec in the notes, not just the weight on the bottle. Read more

3 Gear Oil parts for the 1993 Geo Tracker come from 2 brands — IDEMITSU and MOBIL.

Listed part numbers: IDEMITSU 30305075750, IDEMITSU 30305024750 and MOBIL 104361.

This table covers the fluids specified for the transfer case. Typical signs include discolored fluid, a burnt smell, or a level that keeps dropping. Use only the specification in the notes — the tables group grades because they are not interchangeable. Read more

This group shows a single part: IDEMITSU 30305024750.

This table covers the Transfer Case Input Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

5 Transfer Case Input Shaft Bearing parts for the 1993 Geo Tracker come from 5 brands — WJB / INMOTION PARTS, BCA, NATIONAL and 2 other brands. The "Popular" part is WJB / INMOTION PARTS RB6207.

The Economy section: 1 option from WJB / INMOTION PARTS. WJB / INMOTION PARTS RB6207 is listed in this group.

Standard Replacement: 4 parts, from BCA, NATIONAL, SCHAEFFLER and 1 other brand. A representative part number is BCA WE61445.

This group includes WJB / INMOTION PARTS RB6207, BCA WE61445 and NATIONAL 207 and the remaining parts above.

This table covers the wear sleeves used to restore a Transfer Case Input Shaft seal surface. Read more

6 Transfer Case Input Shaft Repair Sleeve parts are listed for the 1993 Geo Tracker, from SKF, NATIONAL, BCA and 2 other brands. NATIONAL 99139 carries the "Popular" badge.

This group includes NATIONAL 99139 and BCA NS99139 and the remaining parts above.

This table covers the seals at the Transfer Case Input Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

5 Transfer Case Input Shaft Seal parts are listed for the 1993 Geo Tracker, from NATIONAL, BCA, SKF and 2 other brands. NATIONAL 223540 carries the "Popular" badge.

This group includes NATIONAL 223540, BCA NS223540 and SKF 13861 and the remaining parts above.

This table covers the Transfer Case Output Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

6 Transfer Case Output Shaft Bearing parts are listed for the 1993 Geo Tracker, from BCA, WJB / INMOTION PARTS, SCHAEFFLER and 2 other brands. BCA NB306L carries the "Popular" badge.

Economy: 1 part, from WJB / INMOTION PARTS. A representative part number is WJB / INMOTION PARTS RB6306NR.

The Standard Replacement section: 2 options from SCHAEFFLER and SKF. SCHAEFFLER 6306 is listed in this group.

3 ungrouped parts are not assigned to a grade, with the same engine-level match.

Listed part numbers: BCA NB306L, WJB / INMOTION PARTS RB6306NR and SCHAEFFLER 6306, plus the other parts above.

This table covers the wear sleeves used to restore a Transfer Case Output Shaft seal surface. Read more

4 Transfer Case Output Shaft Repair Sleeve parts for the 1993 Geo Tracker come from 4 brands — SCHAEFFLER, SKF, TIMKEN and 1 other brand.

This group includes SCHAEFFLER SR3483, SKF 99157 and TIMKEN KWK99157 and the remaining parts above.

This table covers the seals at the Transfer Case Output Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

7 Transfer Case Output Shaft Seal parts for the 1993 Geo Tracker come from 6 brands — SKF, WJB / INMOTION PARTS, BCA and 3 other brands. The "Popular" part is SKF 18692.

Part numbers include SKF 18692, WJB / INMOTION PARTS WS1213N and BCA NS1213N, among others listed above.

This table covers the Transfer Case Overhaul kits. Read more

This group shows a single part: USA STANDARD GEAR ZTBK236A.

This table covers the U-joints in the driveshaft. Read more

6 Universal Joint parts for the 1993 Geo Tracker come from 5 brands — GMB, MOOG, DANA and 2 other brands. The "Popular" part is GMB 2150081.

In the Heavy Duty grade, GMB supplies 1 part: rated for severe service. A representative part number is GMB 2150081.

Standard Replacement: 5 parts, from MOOG, DANA, FVP and 2 other brands. A representative part number is MOOG 398.

Part numbers include GMB 2150081, MOOG 398 and DANA 51503X, among others listed above.