1996 Geo Tracker Drivetrain Parts

This table covers the Axle Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

5 Axle Shaft Bearing parts for the 1996 Geo Tracker come from 5 brands — WJB / INMOTION PARTS, BCA, SCHAEFFLER and 2 other brands. The "Popular" part is WJB / INMOTION PARTS RB62062RS.

The Economy section lists 1 option from WJB / INMOTION PARTS — the catalog's value-priced group. WJB / INMOTION PARTS RB62062RS is listed in this group.

In the Standard Replacement grade, BCA, SCHAEFFLER, SKF and 1 other brand supply 4 parts: built to original-equipment specification. A representative part number is BCA NB206FF.

This group includes WJB / INMOTION PARTS RB62062RS, BCA NB206FF and SCHAEFFLER 62062RSR and the remaining parts above.

This table covers the seals where an axle shaft exits the housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

6 Axle Shaft Seal parts are listed for the 1996 Geo Tracker, from NATIONAL, WJB / INMOTION PARTS, BCA and 3 other brands. NATIONAL 223553 carries the "Popular" badge.

Part numbers include NATIONAL 223553, WJB / INMOTION PARTS WS223553 and BCA NS223553, among others listed above.

This table covers the complete CV axle shafts from differential (or hub) to wheel. Typical signs include a click in tight turns, grease flung around the wheel well, or a vibration that builds with speed. A torn boot caught early is a boot kit; caught late it is the whole axle. Torque the axle nut to the method in the notes. Read more

4 CV Axle parts are listed for the 1996 Geo Tracker, from TRAKMOTIVE, GSP and TOP NOTCH.

Listed part numbers: GSP NCV68024, TOP NOTCH TN20306 and TRAKMOTIVE SK8022, plus the other parts above.

This table covers the boots that keep grease in a CV joint. Typical signs include a split boot, grease flung around the joint, or a click once grit is inside. A boot caught early is a kit. Once the joint has clicked, the joint itself is usually worn. Read more

7 CV Joint Boot parts are listed for the 1996 Geo Tracker, from DORMAN, BECK/ARNLEY and MEVOTECH. BECK/ARNLEY 1032824 carries the "Popular" badge.

Listed part numbers: BECK/ARNLEY 1032824, MEVOTECH DX818 and BECK/ARNLEY 1032624, plus the other parts above.

This table covers the bearings and races that support the differential carrier. Read more

11 Differential Carrier Bearing / Race parts are listed for the 1996 Geo Tracker, from TIMKEN, SCHAEFFLER, SKF and 3 other brands. NATIONAL KC11445Y carries the "Popular" badge.

Economy: 1 part, from WJB / INMOTION PARTS. A representative part number is WJB / INMOTION PARTS WTKC11445Y.

The Standard Replacement section: 10 options from TIMKEN, SCHAEFFLER, SKF and 2 other brands. NATIONAL KC11445Y is listed in this group.

This table covers the bearings and races on the differential pinion. Read more

11 Differential Pinion Bearing / Race parts for the 1996 Geo Tracker come from 5 brands — TIMKEN, WJB / INMOTION PARTS, BCA and 2 other brands. The "Popular" part is WJB / INMOTION PARTS WT30306.

The Economy section: 2 options from WJB / INMOTION PARTS. WJB / INMOTION PARTS WT30306 is listed in this group.

Standard Replacement: 9 parts, from TIMKEN, BCA, SCHAEFFLER and 1 other brand. A representative part number is BCA NB30306.

This table covers the wear sleeves used to restore a grooved pinion seal surface. Read more

One part is listed for the 1996 Geo Tracker — SKF 99147.

This table covers the seals at the differential pinion yoke. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

6 Differential Pinion Seal parts are listed for the 1996 Geo Tracker, from SKF, TIMKEN, BCA and 3 other brands. SKF 14762 carries the "Popular" badge.

Listed part numbers: SKF 14762, TIMKEN 710523 and BCA NS710523, plus the other parts above.

This table covers the seals at the Differential. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: ELRING 722590.

This table covers the driveshafts that carry torque from the transmission or transfer case. Read more

This group shows a single part: CARDONE 659471.

This table covers the gear oils specified for the axle or transfer case. Typical signs include a low-oil lamp, knocking, or oil that has gone thin before the next interval. Match the viscosity and spec in the notes, not just the weight on the bottle. Read more

2 Gear Oil parts are listed for the 1996 Geo Tracker, from IDEMITSU and MOBIL.

This group includes IDEMITSU 30305024750 and MOBIL 104361.

This table covers the fluids specified for the transfer case. Typical signs include discolored fluid, a burnt smell, or a level that keeps dropping. Use only the specification in the notes — the tables group grades because they are not interchangeable. Read more

One part is listed for the 1996 Geo Tracker — IDEMITSU 30305024750.

This table covers the Transfer Case Input Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

5 Transfer Case Input Shaft Bearing parts are listed for the 1996 Geo Tracker, from WJB / INMOTION PARTS, BCA, NATIONAL and 2 other brands. WJB / INMOTION PARTS RB6207 carries the "Popular" badge.

Economy: 1 part, from WJB / INMOTION PARTS. A representative part number is WJB / INMOTION PARTS RB6207.

The Standard Replacement section: 4 options from BCA, NATIONAL, SCHAEFFLER and 1 other brand. BCA WE61445 is listed in this group.

This group includes WJB / INMOTION PARTS RB6207, BCA WE61445 and NATIONAL 207 and the remaining parts above.

This table covers the wear sleeves used to restore a Transfer Case Input Shaft seal surface. Read more

6 Transfer Case Input Shaft Repair Sleeve parts for the 1996 Geo Tracker come from 5 brands — SKF, NATIONAL, BCA and 2 other brands. The "Popular" part is NATIONAL 99139.

This group includes NATIONAL 99139 and BCA NS99139 and the remaining parts above.

This table covers the seals at the Transfer Case Input Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

5 Transfer Case Input Shaft Seal parts for the 1996 Geo Tracker come from 5 brands — NATIONAL, BCA, SKF and 2 other brands. The "Popular" part is NATIONAL 223540.

Part numbers include NATIONAL 223540, BCA NS223540 and SKF 13861, among others listed above.

This table covers the Transfer Case Output Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

6 Transfer Case Output Shaft Bearing parts for the 1996 Geo Tracker come from 5 brands — BCA, WJB / INMOTION PARTS, SCHAEFFLER and 2 other brands. The "Popular" part is BCA NB306L.

The Economy section: 1 option from WJB / INMOTION PARTS. WJB / INMOTION PARTS RB6306NR is listed in this group.

Standard Replacement: 2 parts, from SCHAEFFLER and SKF. A representative part number is SCHAEFFLER 6306.

3 further parts sit outside the graded sections, with the same engine-level match.

Listed part numbers: BCA NB306L, WJB / INMOTION PARTS RB6306NR and SCHAEFFLER 6306, plus the other parts above.

This table covers the wear sleeves used to restore a Transfer Case Output Shaft seal surface. Read more

4 Transfer Case Output Shaft Repair Sleeve parts are listed for the 1996 Geo Tracker, from SCHAEFFLER, SKF, TIMKEN and 1 other brand.

Part numbers include SCHAEFFLER SR3483, SKF 99157 and TIMKEN KWK99157, among others listed above.

This table covers the seals at the Transfer Case Output Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

6 Transfer Case Output Shaft Seal parts are listed for the 1996 Geo Tracker, from SKF, WJB / INMOTION PARTS, BCA and 3 other brands. SKF 15807 carries the "Popular" badge.

Listed part numbers: SKF 15807, WJB / INMOTION PARTS WS1213N and BCA NS1213N, plus the other parts above.

This table covers the Transfer Case Overhaul kits. Read more

One part is listed for the 1996 Geo Tracker — USA STANDARD GEAR ZTBK236A.

This table covers the U-joints in the driveshaft. Read more

6 Universal Joint parts are listed for the 1996 Geo Tracker, from GMB, MOOG, DANA and 2 other brands. GMB 2150081 carries the "Popular" badge.

The Heavy Duty section lists 1 option from GMB — rated for severe service. GMB 2150081 is listed in this group.

The Standard Replacement section: 5 options from MOOG, DANA, FVP and 2 other brands. MOOG 398 is listed in this group.

Part numbers include GMB 2150081, MOOG 398 and DANA 51503X, among others listed above.