1994 Geo Tracker Engine Parts

This table covers the wear sleeves used to restore a Camshaft seal surface. Read more

4 Camshaft Repair Sleeve parts for the 1994 Geo Tracker come from 4 brands — NATIONAL, SCHAEFFLER, SKF and 1 other brand.

This group includes NATIONAL 99128 and SCHAEFFLER SR3467 and the remaining parts above.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

10 Camshaft Seal parts for the 1994 Geo Tracker come from 9 brands — AJUSA, FEL-PRO, NATIONAL and 6 other brands. The "Popular" part is FEL-PRO TCS45852.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

7 Connecting Rod Bearing parts are listed for the 1994 Geo Tracker, from MAHLE / CLEVITE, ENGINETECH, ITM ENGINE COMPONENTS and 3 other brands. ENGINETECH BB8340 carries the "Popular" badge.

Part numbers include ENGINETECH BB8340, MAHLE / CLEVITE CB1477A4 and ITM ENGINE COMPONENTS 4B9549, among others listed above.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

7 Conversion / Lower Gasket Set parts are listed for the 1994 Geo Tracker, from AJUSA, APEX, ENGINETECH and 3 other brands. APEX ACS7003 carries the "Popular" badge.

Listed part numbers: APEX ACS7003, ENGINETECH SU16CS and AJUSA 54124100, plus the other parts above.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

6 Crankshaft Main Bearing parts for the 1994 Geo Tracker come from 5 brands — TOPLINE, ENGINETECH, MAHLE / CLEVITE and 2 other brands. The "Popular" part is ENGINETECH BC8339.

Part numbers include ENGINETECH BC8339, MAHLE / CLEVITE MS1820A and ITM ENGINE COMPONENTS 5M9378, among others listed above.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

3 Crankshaft Repair Sleeve parts for the 1994 Geo Tracker come from 3 brands — NATIONAL, SCHAEFFLER and WJB / INMOTION PARTS.

This group includes NATIONAL 99128, SCHAEFFLER SR3467 and WJB / INMOTION PARTS WS99128.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

17 Crankshaft Seal parts for the 1994 Geo Tracker come from 11 brands — FEL-PRO, NATIONAL, WJB / INMOTION PARTS and 8 other brands. The "Popular" part is FEL-PRO TCS45895.

This table covers the bolts that clamp the cylinder head to the block. Read more

6 Cylinder Head Bolt parts are listed for the 1994 Geo Tracker, from APEX, TOPLINE, ENGINETECH and 1 other brand. APEX AHB706 carries the "Popular" badge.

Part numbers include APEX AHB706, ENGINETECH HB185 and APEX AHB703, among others listed above.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

8 Cylinder Head Gasket parts are listed for the 1994 Geo Tracker, from ENGINETECH, APEX, FEL-PRO and 4 other brands. APEX AHG703 carries the "Popular" badge.

Listed part numbers: APEX AHG703, FEL-PRO 9683PT1 and AJUSA 10037000, plus the other parts above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

14 Cylinder Head Gasket Set parts are listed for the 1994 Geo Tracker, from ENGINETECH, APEX, AJUSA and 4 other brands. APEX AHS7006 carries the "Popular" badge.

This table covers the Cylinder Head plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

This group shows a single part: GM GENUINE 94033681.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

This group shows a single part: KAT'S HEATERS 16400.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

7 Engine Kit Gasket Set parts are listed for the 1994 Geo Tracker, from ENGINETECH, APEX, ITM ENGINE COMPONENTS and 1 other brand. ENGINETECH SU16K1 carries the "Popular" badge.

Part numbers include ENGINETECH SU16K1, ENGINETECH SU16K2 and APEX AFS7003, among others listed above.

This table covers the Engine rebuild kits. Read more

ENGINETECH supplies both parts for the 1994 Geo Tracker.

Part numbers include ENGINETECH RCGM16BP and ENGINETECH RCGM16CP.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

10 Exhaust Valve parts for the 1994 Geo Tracker come from 5 brands — QUALCAST, ENGINETECH, ITM ENGINE COMPONENTS and 2 other brands. The "Popular" part is ENGINETECH EM2697.

This table covers the Intake Manifold bolts. Read more

One part is listed for the 1994 Geo Tracker — GM GENUINE 11571223.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

11 Intake Manifold Gasket parts are listed for the 1994 Geo Tracker, from APEX, FEL-PRO, ITM ENGINE COMPONENTS and 3 other brands. APEX AMS7060 carries the "Popular" badge.

This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: APEX AMS7062.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

7 Intake Valve parts for the 1994 Geo Tracker come from 5 brands — ENGINETECH, QUALCAST, ITM ENGINE COMPONENTS and 2 other brands. The "Popular" part is ENGINETECH IM2696.

This group includes ENGINETECH IM2696, ENGINETECH IM2694 and ITM ENGINE COMPONENTS RV9538 and the remaining parts above.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

4 Motor Mount parts for the 1994 Geo Tracker come from 4 brands — ANCHOR, DEA / MARMON RIDE CONTROL, PIONEER and 1 other brand.

Listed part numbers: ANCHOR 8568, DEA / MARMON RIDE CONTROL A6827 and PIONEER 602856, plus the other parts above.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

20 Oil parts for the 1994 Geo Tracker come from 3 brands — MOBIL, VALVOLINE and IDEMITSU. The "Popular" part is MOBIL 125195.

The Full Synthetic section lists 7 options from MOBIL and VALVOLINE — full-synthetic oils. MOBIL 125195 is listed in this group.

In the High Mileage (>75,000 Miles) grade, VALVOLINE and MOBIL supply 8 parts: oils grouped for high-mileage engines. A representative part number is VALVOLINE VV1556.

The Racing section lists 1 option from IDEMITSU — grouped under the catalog's "Racing" designation — the notes column spells out what sets them apart. IDEMITSU 30018100750 is listed in this group.

The Synthetic Blend section lists 4 options from MOBIL and VALVOLINE — synthetic-blend oils. MOBIL 124406 is listed in this group.

This table covers the Oil Cooler Mounting kits. Read more

HAYDEN supplies both parts for the 1994 Geo Tracker.

Part numbers include HAYDEN 238 and HAYDEN 153.

This table covers the drain plugs in the oil pan. Read more

9 Oil Drain Plug parts for the 1994 Geo Tracker come from 4 brands — DORMAN, AGS, ENGINETECH and 1 other brand. The "Popular" part is AGS ODP00007.

In the Piggyback grade, DORMAN supplies 1 part: grouped under the catalog's "Piggyback" designation — the notes column spells out what sets them apart. A representative part number is DORMAN 65229.

In the Twist Drain grade, DORMAN supplies 1 part: grouped under the catalog's "Twist Drain" designation — the notes column spells out what sets them apart. A representative part number is DORMAN 092020.

In the Universal grade, DORMAN supplies 1 part: grouped under the catalog's "Universal" designation — the notes column spells out what sets them apart. A representative part number is DORMAN 65102.

6 further parts sit outside the graded sections, with the same engine-level match.

Part numbers include AGS ODP00007, DORMAN 65229 and DORMAN 092020, among others listed above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Oil Drain Plug Gasket parts are listed for the 1994 Geo Tracker, from DORMAN, FEL-PRO, JAPANESE OE and 1 other brand. DORMAN 095147 carries the "Popular" badge.

This group includes DORMAN 095147, DORMAN 995147CD and FEL-PRO 73351 and the remaining parts above.

This table covers the caps on the oil filler neck. Read more

2 Oil Filler Cap parts for the 1994 Geo Tracker come from MOTORAD.

Listed part numbers: MOTORAD MO83 and MOTORAD MO101.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

17 Oil Filter parts for the 1994 Geo Tracker come from 13 brands — BOSCH, VARIOUS MFR, WIX and 10 other brands. The "Popular" part is WIX 51348XP.

The Economy section lists 5 options from BOSCH, FRAM, FVP and 2 other brands — the catalog's value-priced group. BOSCH 72161WS is listed in this group.

The High Performance / Heavy Duty section lists 2 options from WIX and MOBIL — grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. WIX 51348XP is listed in this group.

In the Standard Replacement grade, MOTORCRAFT, DENSO, WIX and 6 other brands supply 10 parts: built to original-equipment specification. A representative part number is DENSO 1502010.

This table covers the Oil Galley plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

This group shows a single part: GM GENUINE 93439312.

This table covers the Oil Level sensors. Typical signs include a warning lamp, a stored code, or a reading that drops out when the harness is wiggled. Inspect the connector and ground before replacing the sensor — wiring faults are often condemned as bad sensors. Read more

This group shows a single part: WELLS 1S6556.

This table covers the oil pans that hold the engine's oil sump. Read more

6 Oil Pan parts are listed for the 1994 Geo Tracker, from DORMAN, LILAND GLOBAL, ATP and 3 other brands. DORMAN 264111 carries the "Popular" badge.

This group includes DORMAN 264111, LILAND GLOBAL IGMP15A and ATP 103051 and the remaining parts above.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

7 Oil Pan Gasket parts for the 1994 Geo Tracker come from 6 brands — VICTOR REINZ, ITM ENGINE COMPONENTS, AJUSA and 3 other brands. The "Popular" part is ITM ENGINE COMPONENTS 0991405.

Listed part numbers: ITM ENGINE COMPONENTS 0991405, VICTOR REINZ 703141410 and AJUSA 14063000, plus the other parts above.

This table covers the Oil pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit. Read more

5 Oil Pump parts for the 1994 Geo Tracker come from 5 brands — SKP, MELLING, ENGINETECH and 2 other brands. The "Popular" part is MELLING M169.

The Economy section: 1 option from SKP. SKP SKPM169 is listed in this group.

Standard Replacement: 4 parts, from MELLING, ENGINETECH, ITM ENGINE COMPONENTS and 1 other brand. A representative part number is MELLING M169.

Part numbers include MELLING M169, SKP SKPM169 and ENGINETECH EP169, among others listed above.

This table covers the gaskets that seal the Oil Pump. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 1994 Geo Tracker — BECK/ARNLEY 0398011.

This table covers the pistons that travel in each cylinder. Typical signs include knock, blow-by, or a cylinder that will not hold compression. Piston work is a short-block job. Match bore, pin and ring pack in the notes — not the photo. Read more

8 Piston parts are listed for the 1994 Geo Tracker, from ENGINETECH, TOPLINE, ITM ENGINE COMPONENTS and 1 other brand. ENGINETECH P4630 carries the "Popular" badge.

This group includes ENGINETECH P4630, ITM ENGINE COMPONENTS RY6414 and ENGINETECH K46294P and the remaining parts above.

This table covers the rings that seal each piston to the cylinder wall. Read more

7 Piston Ring parts are listed for the 1994 Geo Tracker, from HASTINGS MANUFACTURING, ENGINETECH, MAHLE / CLEVITE and 3 other brands. ENGINETECH C75154 carries the "Popular" badge.

The Premium section lists 3 options from ENGINETECH, MAHLE / CLEVITE and SEALED POWER — a step above OE specification in materials, tolerances or warranty terms. ENGINETECH C75154 is listed in this group.

The Standard Replacement section: 4 options from HASTINGS MANUFACTURING, ITM ENGINE COMPONENTS and TOPLINE. HASTINGS MANUFACTURING 2C4640 is listed in this group.

Part numbers include ENGINETECH C75154, MAHLE / CLEVITE 41592CP and SEALED POWER E515KC, among others listed above.

This table covers the Re-Ring kits. Read more

This group shows a single part: ENGINETECH RMGM16CP.

This table covers the rocker arms that transfer cam motion to the valves. Read more

3 Rocker Arm parts for the 1994 Geo Tracker come from 3 brands — ENGINETECH, ITM ENGINE COMPONENTS and TOPLINE.

Part numbers include ENGINETECH ER1001, ITM ENGINE COMPONENTS 0566143 and TOPLINE RASZ2.

This table covers the Rocker Arm shafts. Read more

2 Rocker Arm Shaft parts for the 1994 Geo Tracker come from ITM ENGINE COMPONENTS.

This group includes ITM ENGINE COMPONENTS 0568108 and ITM ENGINE COMPONENTS 0568107.

This table covers the Thrust washers. Read more

4 Thrust Washer parts for the 1994 Geo Tracker come from 4 brands — ENGINETECH, ITM ENGINE COMPONENTS, KING ENGINE BEARINGS and 1 other brand.

Part numbers include ENGINETECH TW8339, ITM ENGINE COMPONENTS 1T1000 and KING ENGINE BEARINGS TW144AM, among others listed above.

This table covers the Timing belts. Typical signs include squeal on cold start, cracked ribs, or glazing. Spin the tensioner and idlers by hand while the belt is off. Read more

18 Timing Belt parts are listed for the 1994 Geo Tracker, from CLOYES, GATES, ACDELCO and 8 other brands. CLOYES B212 carries the "Popular" badge.

Economy: 4 parts, from CLOYES, ENGINETECH and ITM ENGINE COMPONENTS. A representative part number is CLOYES B212.

The Standard Replacement section: 14 options from GATES, ACDELCO, BANDO and 5 other brands. GATES T164 is listed in this group.