2018 GMC Canyon Ignition Parts

This table covers the sensors that report camshaft position to the ECU. Typical signs include a stall, a no-start, or a code for cam or crank correlation. Check the connector and the reluctor gap before replacing the sensor. Read more

19 Camshaft Position Sensor parts are listed for the 2018 GMC Canyon, from HOLSTEIN, DELPHI, GM GENUINE and 9 other brands. DELPHI SS11963 carries the "Popular" badge.

In the Economy grade, HOLSTEIN, PRENCO, UNITED MOTOR PRODUCTS and 1 other brand supply 5 parts: the catalog's value-priced group. A representative part number is HOLSTEIN 2CAM0408.

The Standard Replacement section lists 12 options from GM GENUINE, STANDARD MOTOR PRODUCTS, WALKER PRODUCTS and 4 other brands — built to original-equipment specification. DELPHI SS11963 is listed in this group.

2 ungrouped parts are not assigned to a grade, with the same engine-level match.

This table covers the seals at the Camshaft Position Sensor. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: GM GENUINE 12626252.

This table covers the sensors that report crankshaft position and engine speed. Typical signs include a stall, a no-start, or a code for cam or crank correlation. Check the connector and the reluctor gap before replacing the sensor. Read more

19 Crankshaft Position Sensor parts are listed for the 2018 GMC Canyon, from HOLSTEIN, SPECTRA PREMIUM, DELPHI and 8 other brands. SHEE-MAR SM303 carries the "Popular" badge.

Economy: 7 parts, from HOLSTEIN, SPECTRA PREMIUM, SHEE-MAR and 2 other brands. A representative part number is SHEE-MAR SM303.

The Standard Replacement section: 12 options from DELPHI, GM GENUINE, STANDARD MOTOR PRODUCTS and 3 other brands. DELPHI SS12172 is listed in this group.

This table covers the coils that fire each spark plug. Typical signs include a misfire that follows one cylinder, a snap in damp weather, or a coil that is swollen or cracked. Swap a suspect coil with a neighbor to confirm, then replace boots that tore on the way off. Read more

26 Ignition Coil parts are listed for the 2018 GMC Canyon, from DELPHI, GM GENUINE, SKP and 10 other brands. SKP SKUF680 carries the "Popular" badge. They are grouped as Economy, Premium and Standard Replacement, with Standard Replacement the largest group at 14 parts from GM GENUINE, NGK, STANDARD MOTOR PRODUCTS and 4 other brands.

This table covers the lock cylinders in the ignition switch. Read more

3 Ignition Lock Cylinder parts are listed for the 2018 GMC Canyon, from GM GENUINE, STANDARD MOTOR PRODUCTS and WELLS.

Part numbers include GM GENUINE D1464G, STANDARD MOTOR PRODUCTS US644L and WELLS 4H1762.

This table covers the Ignition Lock housings. Read more

2 Ignition Lock Housing parts for the 2018 GMC Canyon come from GM GENUINE.

Listed part numbers: GM GENUINE 84714720 and GM GENUINE 84714721.

This table covers the spark plugs for this engine. Typical signs include misfire under load, rough idle, or a flashing check-engine light. Verify the gap even on pre-gapped plugs, and replace coil boots that come off a high-mileage engine. Read more

21 Spark Plug parts for the 2018 GMC Canyon come from 7 brands — NGK, CHAMPION, BOSCH and 4 other brands. The "Popular" part is CHAMPION 570.

The Copper / Nickel section lists 1 option from CHAMPION — grouped under the catalog's "Copper / Nickel" designation — the notes column spells out what sets them apart. CHAMPION 570 is listed in this group.

The Double Platinum (lasts up to 3x longer than Copper / Nickel) section lists 3 options from AUTOLITE, BOSCH and CHAMPION — grouped under the catalog's "Double Platinum (lasts up to 3x longer than Copper / Nickel)" designation — the notes column spells out what sets them apart. AUTOLITE APP5364 is listed in this group.

In the Iridium (lasts up to 4x longer than Copper / Nickel) grade, NGK, DENSO, ACDELCO and 4 other brands supply 9 parts: grouped under the catalog's "Iridium (lasts up to 4x longer than Copper / Nickel)" designation — the notes column spells out what sets them apart. A representative part number is NGK 4344.

The Platinum (lasts up to 2x longer than Copper / Nickel) section lists 3 options from NGK, BOSCH and CHAMPION — grouped under the catalog's "Platinum (lasts up to 2x longer than Copper / Nickel)" designation — the notes column spells out what sets them apart. NGK 5019 is listed in this group.

The Ruthenium (maximum durability & ignitability) section lists 1 option from NGK — grouped under the catalog's "Ruthenium (maximum durability & ignitability)" designation — the notes column spells out what sets them apart. NGK 90220 is listed in this group.

4 further parts sit outside the graded sections, with the same engine-level match.

This table covers the silicone and rubber boots that insulate the coil-to-plug spark path. Typical signs include a misfire in the rain, carbon tracking on the boot, or a snap when you pop the coil off. Replace boots as a set on a high-mileage engine; one cracked boot will take the coil with it. Read more

STANDARD MOTOR PRODUCTS supplies the 4 Spark Plug / Ignition Coil Boot parts for the 2018 GMC Canyon.

Economy: 2 parts, from STANDARD MOTOR PRODUCTS. A representative part number is STANDARD MOTOR PRODUCTS 20951.

The Standard Replacement section: 2 options from STANDARD MOTOR PRODUCTS. STANDARD MOTOR PRODUCTS SPP190E is listed in this group.

This group includes STANDARD MOTOR PRODUCTS 20951, STANDARD MOTOR PRODUCTS 34181 and STANDARD MOTOR PRODUCTS SPP190E and the remaining parts above.

This table covers the seals at the Spark Plug Tube. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Spark Plug Tube Seal parts are listed for the 2018 GMC Canyon, from MAHLE / CLEVITE and GM GENUINE.

Part numbers include GM GENUINE 12613249, MAHLE / CLEVITE GS34108 and MAHLE / CLEVITE GS34091.