2018 GMC Canyon Engine Parts

This table covers the chains that drive the balance shafts. Read more

7 Balance Shaft Chain parts are listed for the 2018 GMC Canyon, from CLOYES, MELLING, GM GENUINE and 2 other brands. CLOYES C919 carries the "Popular" badge.

The Chain Only section lists 5 options from CLOYES, MELLING, GM GENUINE and 2 other brands — grouped under the catalog's "Chain Only" designation — the notes column spells out what sets them apart. CLOYES C919 is listed in this group.

In the Kit grade, CLOYES and MELLING supply 2 parts: grouped under the catalog's "Kit" designation — the notes column spells out what sets them apart. A representative part number is CLOYES 90919S.

This group includes CLOYES C919, MELLING 1094 and GM GENUINE 12626983 and the remaining parts above.

This table covers the guides that keep the balance-shaft chain on its path. Read more

5 Balance Shaft Chain Guide parts are listed for the 2018 GMC Canyon, from MELLING, CLOYES, GM GENUINE and 2 other brands. MELLING BG5150 carries the "Popular" badge.

This group includes MELLING BG5150, CLOYES 95953 and GM GENUINE 12655471 and the remaining parts above.

This table covers the Balance Shaft Chain tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

6 Balance Shaft Chain Tensioner parts for the 2018 GMC Canyon come from 6 brands — GM GENUINE, MELLING, CLOYES and 3 other brands. The "Popular" part is GM GENUINE 12626984.

This group includes GM GENUINE 12626984, MELLING BT5208 and CLOYES 95952 and the remaining parts above.

This table covers the Balance Shaft sprockets. Read more

6 Balance Shaft Sprocket parts are listed for the 2018 GMC Canyon, from GM GENUINE, MELLING, CLOYES and 3 other brands. GM GENUINE 12655716 carries the "Popular" badge.

Listed part numbers: GM GENUINE 12655716, MELLING S1370 and CLOYES S1101, plus the other parts above.

This table covers the camshafts that open the valves. Read more

GM GENUINE supplies the 9 Camshaft parts for the 2018 GMC Canyon.

This group includes GM GENUINE 12638651, GM GENUINE 28290131 and GM GENUINE 12642853 and the remaining parts above.

This table covers the Camshaft Alignment tools. This is a service tool, not a wear part — match the application in the notes. Read more

This group shows a single part: LISLE 37530.

This table covers the Camshaft plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

One part is listed for the 2018 GMC Canyon — GM GENUINE 12643564.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Camshaft Seal parts for the 2018 GMC Canyon come from 2 brands — GM GENUINE and AJUSA.

This group includes AJUSA 15092300, GM GENUINE 12574477 and GM GENUINE 12643563 and the remaining parts above.

This table covers the Circular / Semi-Circular plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

This group shows a single part: GM GENUINE 11588547.

This table covers the connecting rods between each piston and the crankshaft. Read more

GM GENUINE supplies the 3 Connecting Rod parts for the 2018 GMC Canyon.

Part numbers include GM GENUINE 12674412, GM GENUINE 12625458 and GM GENUINE 12647161.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

8 Connecting Rod Bearing parts are listed for the 2018 GMC Canyon, from GM GENUINE and MAHLE / CLEVITE.

Listed part numbers: GM GENUINE 12668645, GM GENUINE 12625481 and GM GENUINE 12625468, plus the other parts above.

This table covers the Connecting Rod bolts. Read more

3 Connecting Rod Bolt parts for the 2018 GMC Canyon come from GM GENUINE.

Part numbers include GM GENUINE 11548927, GM GENUINE 12625461 and GM GENUINE 11519680.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

AJUSA supplies the 3 Conversion / Lower Gasket Set parts for the 2018 GMC Canyon.

This group includes AJUSA 54229400, AJUSA 54342300 and AJUSA 54323100.

This table covers the crankshafts that turn piston motion into rotation. Read more

GM GENUINE supplies both parts for the 2018 GMC Canyon.

Listed part numbers: GM GENUINE 24590075 and GM GENUINE 12699162.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

9 Crankshaft Main Bearing parts for the 2018 GMC Canyon come from GM GENUINE. The "Popular" part is GM GENUINE 12625399.

Listed part numbers: GM GENUINE 12625399, GM GENUINE 12668646 and GM GENUINE 12625397, plus the other parts above.

This table covers the Crankshaft Main Bearing Cap bolts. Read more

One part is listed for the 2018 GMC Canyon — GM GENUINE 11589001.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

6 Crankshaft Repair Sleeve parts for the 2018 GMC Canyon come from 3 brands — BCA, NATIONAL and WJB / INMOTION PARTS. 1 part fits every engine; the other 5 are engine-specific.

Part numbers include BCA NS99166, BCA NS99353 and NATIONAL 99353, among others listed above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

23 Crankshaft Seal parts for the 2018 GMC Canyon come from 12 brands — GM GENUINE, NATIONAL, AJUSA and 9 other brands. The "Popular" part is FEL-PRO BS40739.

This table covers the Crankshaft Seal covers. Read more

One part is listed for the 2018 GMC Canyon — GM GENUINE 55484756.

This table covers the Cylinder Head Alignment Dowel pins. Read more

One part is listed for the 2018 GMC Canyon — GM GENUINE 12570326.

This table covers the bolts that clamp the cylinder head to the block. Read more

9 Cylinder Head Bolt parts are listed for the 2018 GMC Canyon, from GM GENUINE, AJUSA, ARP and 1 other brand.

This group includes AJUSA 81065100, AJUSA 81044300 and AJUSA 81082800 and the remaining parts above.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

21 Cylinder Head Gasket parts are listed for the 2018 GMC Canyon, from GM GENUINE, AJUSA, APEX and 2 other brands. GM GENUINE 12648979 carries the "Popular" badge.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

10 Cylinder Head Gasket Set parts are listed for the 2018 GMC Canyon, from GM GENUINE, AJUSA, MAHLE / CLEVITE and 2 other brands. GM GENUINE 12659927 carries the "Popular" badge.

This table covers the Engine Block drain plugs. Read more

One part is listed for the 2018 GMC Canyon — GM GENUINE 11546667.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

7 Engine Block Heater parts for the 2018 GMC Canyon come from 2 brands — KAT'S HEATERS and GM GENUINE.

Listed part numbers: GM GENUINE 12586687, GM GENUINE 55503649 and GM GENUINE 12664613, plus the other parts above.

This table covers the Engine covers. Read more

2 Engine Cover parts are listed for the 2018 GMC Canyon, from TECHPRO and VARIOUS MFR. All of them fit every engine offered in the 2018 Canyon.

This group includes TECHPRO GM1228181 and the remaining parts above.

This table covers the Engine Cover bolts. Read more

This group shows a single part: GM GENUINE 11611795.

This table covers the Engine Cover grommets. Read more

This group shows a single part: GM GENUINE 12737359.

This table covers the Engine Cover retainers and clips. Read more

2 Engine Cover Retainer / Clip parts for the 2018 GMC Canyon come from GM GENUINE. 1 part fits every engine; the other 1 is engine-specific.

This group includes GM GENUINE 10121502 and GM GENUINE 11588327.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

AJUSA supplies the 3 Engine Kit Gasket Set parts for the 2018 GMC Canyon.

Part numbers include AJUSA 50548800, AJUSA 51114800 and AJUSA 50552200.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

9 Exhaust Valve parts for the 2018 GMC Canyon come from 4 brands — GM GENUINE, MELLING, QUALCAST and 1 other brand.

This group includes GM GENUINE 12627156, GM GENUINE 12625566 and GM GENUINE 12647868 and the remaining parts above.

This table covers the followers that drive a mechanical fuel pump off the camshaft. Read more

3 Fuel Pump Camshaft Follower parts are listed for the 2018 GMC Canyon, from GM GENUINE, STANDARD MOTOR PRODUCTS and WELLS.

This group includes GM GENUINE 12718357, STANDARD MOTOR PRODUCTS GDF102 and WELLS 5T5013.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

8 Harmonic Balancer parts are listed for the 2018 GMC Canyon, from GM GENUINE, SKP, ATP and 2 other brands. GM GENUINE 25202078 carries the "Popular" badge.

In the Economy grade, SKP supplies 2 parts: the catalog's value-priced group. A representative part number is SKP SK594713.

The Standard Replacement section lists 5 options from GM GENUINE, ATP, DORMAN and 1 other brand — built to original-equipment specification. GM GENUINE 25202078 is listed in this group.

1 ungrouped part is not assigned to a grade, with the same engine-level match.

This group includes GM GENUINE 25202078, SKP SK594713 and SKP SK12697769 and the remaining parts above.

This table covers the Harmonic Balancer bolts. Read more

4 Harmonic Balancer Bolt parts for the 2018 GMC Canyon come from 2 brands — GM GENUINE and DORMAN.

This group includes DORMAN 917139, GM GENUINE 12557840 and GM GENUINE 11515756 and the remaining parts above.

This table covers the Intake manifolds. Typical signs include an exhaust tick, a vacuum leak, or a gasket that has burned through. Replace the gaskets and hardware; a warped flange will leak with a new gasket alone. Read more

3 Intake Manifold parts for the 2018 GMC Canyon come from GM GENUINE.

Listed part numbers: GM GENUINE 12631023, GM GENUINE 12640048 and GM GENUINE 12675740.

This table covers the Intake Manifold bolts. Read more

GM GENUINE supplies the 3 Intake Manifold Bolt parts for the 2018 GMC Canyon. 2 parts fit every engine; the other 1 is engine-specific.

Part numbers include GM GENUINE 11588352, GM GENUINE 11547030 and GM GENUINE 11547321.

This table covers the Intake Manifold covers. Read more

One part is listed for the 2018 GMC Canyon — GM GENUINE 12680066.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

13 Intake Manifold Gasket parts are listed for the 2018 GMC Canyon, from GM GENUINE, AJUSA, FEL-PRO and 2 other brands. FEL-PRO MS97649 carries the "Popular" badge. 1 part fits every engine; the other 12 are engine-specific.

This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Intake Plenum Gasket parts for the 2018 GMC Canyon come from 2 brands — AJUSA and GM GENUINE.

This group includes AJUSA 01600000 and GM GENUINE 12700744.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

7 Intake Valve parts for the 2018 GMC Canyon come from 4 brands — GM GENUINE, MELLING, QUALCAST and 1 other brand.

Part numbers include GM GENUINE 12662527, GM GENUINE 12647867 and MELLING V3441, among others listed above.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

17 Motor Mount parts for the 2018 GMC Canyon come from 5 brands — DEA / MARMON RIDE CONTROL, GM GENUINE, ANCHOR and 2 other brands. The "Popular" part is ANCHOR 3349. 4 parts fit every engine; the other 13 are engine-specific.

This table covers the Motor Mount bolts. Read more

One part is listed for the 2018 GMC Canyon — GM GENUINE 11588740.

This table covers the brackets that mount the Motor Mount. Typical signs include a cracked mount, a rattle, or a bracket that no longer holds alignment. Confirm position in the notes. Many brackets look alike and bolt to different corners. Read more

This group shows a single part: GM GENUINE 84060315.

This table covers the Motor Mount Bracket bolts. Read more

GM GENUINE supplies the 3 Motor Mount Bracket Bolt parts for the 2018 GMC Canyon. 1 part fits every engine; the other 2 are engine-specific.

Part numbers include GM GENUINE 11588740, GM GENUINE 11588273 and GM GENUINE 11515775.

This table covers the Motor Mount kits. Read more

3 Motor Mount Kit parts for the 2018 GMC Canyon come from ANCHOR. 1 part fits every engine; the other 2 are engine-specific.

Listed part numbers: ANCHOR 300017, ANCHOR 300018 and ANCHOR 300016.