1964 Griffith 200 Ignition Parts

Engine:
4.7L V8

The 1964 Griffith 200 has 16 ignition parts with verified fitment on this page — 3 part types and 10 brands, covering the 4.7L V8 engine. Each part includes a manufacturer part number and application notes.

On the 1964 Griffith 200, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules. All 16 listed parts are Spark Plug (8 parts), Ignition Coil (6 parts) and Distributor Mounting Gasket (2 parts).

Distributor Mounting Gasket

Brand Part Number Markets Notes Buy
FEL-PRO 5511
🇺🇸 US
O-Ring Type
View on
Amazon
VICTOR REINZ 411040300
🇺🇸 US
O-Ring Type
View on
Amazon

This table covers the gaskets that seal the Distributor Mounting. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Ignition Coil

Economy

Brand Part Number Markets Notes Buy
FVP UC12F
🇺🇸 US
with 12 Volt Systemwith External Resistor
View on
Amazon
SKP SKUC12
🇺🇸 US
with 12 Volt Systemfor with External Resistor.
View on
Amazon
STANDARD MOTOR PRODUCTS UC12T
🇺🇸 US
T-Series
Fitment notes — STANDARD MOTOR PRODUCTS UC12T
T-Series
with 12 Volt Systemwith External Resistor
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
ACDELCO Popular U505
🇺🇸 US 🇨🇦 CA
Professional
View on
Amazon
WELLS Popular 5C1026
🇺🇸 US
Requires External Resistor: YES
View on
Amazon
STANDARD MOTOR PRODUCTS UC12
🇺🇸 US
with 12 Volt Systemwith External Resistor
View on
Amazon

This table covers the coils that fire each spark plug. Typical signs include a misfire that follows one cylinder, a snap in damp weather, or a coil that is swollen or cracked. Swap a suspect coil with a neighbor to confirm, then replace boots that tore on the way off.

Spark Plug

Summary: Notes include pre-set gaps of 0.030", 0.035", 0.040" and 0.044". Replacement brands in this table include MOTORCRAFT, ACDELCO and CHAMPION.

Copper / Nickel

Brand Part Number Markets Notes Buy
ACDELCO Popular R83TS
🇺🇸 US 🇨🇦 CA
ProfessionalConventional
Fitment notes — ACDELCO R83TS
ProfessionalConventionalPre-Set Gap: 0.040"
Original Equipment-Recommended Gap: .030
View on
Amazon
MOTORCRAFT Popular SP420X
🇺🇸 US
Copper Spark PlugInsulator Height: 60.5282
Fitment notes — MOTORCRAFT SP420X
Copper Spark PlugInsulator Height: 60.5282Spark Plug Approximate Resistor Value: 2,000 or 12,000
with 18mm ThreadGap: .030
View on
Amazon
CHAMPION 409
🇺🇸 US
Copper PlusPre-Set Gap: 0.035"
Fitment notes — CHAMPION 409
Copper PlusPre-Set Gap: 0.035"
OE-Recommended Gap: 0.035"
View on
Amazon
MOTORCRAFT SP420
🇺🇸 US
Copper
Fitment notes — MOTORCRAFT SP420
Copper
OE Style.030"/0.8mm
View on
Amazon

Double Platinum (lasts up to 3x longer than Copper / Nickel)

Brand Part Number Markets Notes Buy
AUTOLITE APP45
🇺🇸 US
Double PlatinumPre-Set Gap: 0.044"
Fitment notes — AUTOLITE APP45
Double PlatinumPre-Set Gap: 0.044"
Gap .030 (In) 0.8 (mm)
View on
Amazon

Platinum (lasts up to 2x longer than Copper / Nickel)

Brand Part Number Markets Notes Buy
MOTORCRAFT SP549X
🇺🇸 US
Platinum Spark PlugPlatinum
Fitment notes — MOTORCRAFT SP549X
Platinum Spark PlugPlatinumSpark Plug Approximate Resistor Value: 2,00012,000
Gap: 0.030"/0.8mmwith 18mm Thread
View on
Amazon
MOTORCRAFT SP459
🇺🇸 US
Finewire Platinum
Fitment notes — MOTORCRAFT SP459
Finewire Platinum
Gap: .030with 14mm Thread Diameter
View on
Amazon
MOTORCRAFT SP459X
🇺🇸 US
Platinum
Fitment notes — MOTORCRAFT SP459X
Platinum
Gap: .030with 14mm Thread Diameter
View on
Amazon

This table covers the spark plugs for this engine. Typical signs include misfire under load, rough idle, or a flashing check-engine light. Verify the gap even on pre-gapped plugs, and replace coil boots that come off a high-mileage engine.

Buying Ignition Parts for a 1964 Griffith 200

On this vehicle, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules.

  • Confirm you have the 4.7L V8 engine — every part on this page is matched to it.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Spark Plug and Ignition Coil .

Frequently Asked Questions

How many ignition parts fit the 1964 Griffith 200?

Our catalog currently lists 16 ignition parts for the 1964 Griffith 200 across 3 subcategories and 10 brands, covering the 4.7L V8 engine. Each part is matched to the engine(s) it fits.

What are the signs of ignition problems on a 1964 Griffith 200?

Common symptoms include misfires under load, rough idle, flashing check-engine light, or poor starting in damp weather. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What spark-plug gap is listed for the 1964 Griffith 200?

Notes on this page include pre-set gaps of 0.030", 0.035", 0.040" and 0.044". Still verify against spec — even “pre-gapped” plugs should be checked before they go in.

What should I replace at the same time?

Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1964 Griffith 200 was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 1964 Griffith 200?

Every part on this page is matched to the 4.7L V8 engine. Then gap matters even on “pre-gapped” plugs — verify against spec, and replace coil boots when they come off a high-mileage engine. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 1964 Griffith 200

Ignition Parts for Other Griffith 200 Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.