1964 Griffith 200 Engine Parts

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

9 Connecting Rod Bearing parts for the 1964 Griffith 200 come from KING ENGINE BEARINGS. The "Popular" part is KING ENGINE BEARINGS CR804SI.

The High Performance section lists 7 options from KING ENGINE BEARINGS — engineered beyond original-equipment specification. KING ENGINE BEARINGS CR804HPN is listed in this group.

In the Standard Replacement grade, KING ENGINE BEARINGS supplies 2 parts: built to original-equipment specification. A representative part number is KING ENGINE BEARINGS CR804SI.

This group includes KING ENGINE BEARINGS CR804SI, KING ENGINE BEARINGS CR804HPN and KING ENGINE BEARINGS CR804HPNX and the remaining parts above.

This table covers the Connecting Rod bolts. Read more

One part is listed for the 1964 Griffith 200 — ARP 1546002.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

2 Conversion / Lower Gasket Set parts for the 1964 Griffith 200 come from 2 brands — FEL-PRO and VICTOR REINZ.

This group includes FEL-PRO CS85484 and VICTOR REINZ 081009401.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

KING ENGINE BEARINGS supplies the 7 Crankshaft Main Bearing parts for the 1964 Griffith 200. KING ENGINE BEARINGS MB529XP carries the "Popular" badge.

High Performance: 5 parts, from KING ENGINE BEARINGS. A representative part number is KING ENGINE BEARINGS MB529XP.

The Standard Replacement section: 2 options from KING ENGINE BEARINGS. KING ENGINE BEARINGS MB529SI is listed in this group.

Part numbers include KING ENGINE BEARINGS MB529XP, KING ENGINE BEARINGS MB529HP and KING ENGINE BEARINGS MB529HPX, among others listed above.

This table covers the Crankshaft Main Bearing Cap bolts. Read more

This group shows a single part: ARP 1545001.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Crankshaft Seal parts are listed for the 1964 Griffith 200, from FEL-PRO and VICTOR REINZ.

This group includes FEL-PRO BS30136 and VICTOR REINZ 191015601.

This table covers the bolts that clamp the cylinder head to the block. Read more

4 Cylinder Head Bolt parts for the 1964 Griffith 200 come from ARP.

Part numbers include ARP 1543601, ARP 1543701 and ARP 4543601, among others listed above.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Cylinder Head Gasket parts for the 1964 Griffith 200 come from 3 brands — FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ. The "Popular" part is FEL-PRO 9333PT1.

Part numbers include FEL-PRO 9333PT1, FEL-PRO 8548PT2 and MAHLE / CLEVITE 3428, among others listed above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

3 Cylinder Head Gasket Set parts for the 1964 Griffith 200 come from 3 brands — FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.

This group includes FEL-PRO HS8548PT11, MAHLE / CLEVITE HS3530VJ and VICTOR REINZ 021060201.

This table covers the Cylinder Head Spacer shims. Read more

2 Cylinder Head Spacer Shim parts for the 1964 Griffith 200 come from 2 brands — MAHLE / CLEVITE and VICTOR REINZ.

Part numbers include MAHLE / CLEVITE 3428SH and VICTOR REINZ 711638100.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

2 Engine Kit Gasket Set parts for the 1964 Griffith 200 come from 2 brands — FEL-PRO and VICTOR REINZ.

Part numbers include FEL-PRO FS8548PT16 and VICTOR REINZ 011005801.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

7 Harmonic Balancer parts for the 1964 Griffith 200 come from ENGINE PRO. The "Popular" part is ENGINE PRO PB1203ST.

Part numbers include ENGINE PRO PB1203ST, ENGINE PRO PB1008ST and ENGINE PRO PB1009ST, among others listed above.

This table covers the wear sleeves used to restore a Harmonic Balancer seal surface. Read more

One part is listed for the 1964 Griffith 200 — MAHLE / CLEVITE 66595RS.

This table covers the Intake Manifold bolts. Read more

3 Intake Manifold Bolt parts for the 1964 Griffith 200 come from ARP.

Listed part numbers: ARP 1542001, ARP 4542001 and ARP 4542101.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Intake Manifold Gasket parts for the 1964 Griffith 200 come from 3 brands — FEL-PRO, VICTOR REINZ and MAHLE / CLEVITE. The "Popular" part is FEL-PRO MS901031.

Part numbers include FEL-PRO MS901031, FEL-PRO MS901161 and MAHLE / CLEVITE 95010SG, among others listed above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Oil Drain Plug Gasket parts for the 1964 Griffith 200 come from 2 brands — FEL-PRO and VICTOR REINZ.

Part numbers include FEL-PRO 70822 and VICTOR REINZ 711346200.

This table covers the Oil Pan bolts. Read more

One part is listed for the 1964 Griffith 200 — ARP 2541802.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

7 Oil Pan Gasket parts are listed for the 1964 Griffith 200, from FEL-PRO, MAHLE / CLEVITE, VICTOR REINZ and 1 other brand. FEL-PRO OS13260C carries the "Popular" badge.

Listed part numbers: FEL-PRO OS13260C, FEL-PRO OS13260T and ENGINE PRO 3113260, plus the other parts above.

This table covers the gaskets that seal the Oil Pump. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Oil Pump Gasket parts for the 1964 Griffith 200 come from 2 brands — FEL-PRO and VICTOR REINZ.

Part numbers include FEL-PRO 70083 and VICTOR REINZ 711462300.

This table covers the gaskets that seal the Oil Pump Pickup Tube. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Oil Pump Pickup Tube Gasket parts for the 1964 Griffith 200 come from 2 brands — FEL-PRO and VICTOR REINZ.

Listed part numbers: FEL-PRO 72516 and VICTOR REINZ 711350300.

This table covers the Oil Pump shafts. Read more

One part is listed for the 1964 Griffith 200 — ARP 1547904.

This table covers the pistons that travel in each cylinder. Typical signs include knock, blow-by, or a cylinder that will not hold compression. Piston work is a short-block job. Match bore, pin and ring pack in the notes — not the photo. Read more

5 Piston parts for the 1964 Griffith 200 come from SILV-O-LITE. The "Popular" part is SILV-O-LITE 3101HC.

In the Premium grade, SILV-O-LITE supplies 3 parts: a step above OE specification in materials, tolerances or warranty terms. A representative part number is SILV-O-LITE 3101HC.

Standard Replacement: 2 parts, from SILV-O-LITE. A representative part number is SILV-O-LITE 1157.

Part numbers include SILV-O-LITE 3101HC, SILV-O-LITE 1177HC and SILV-O-LITE S1177HC, among others listed above.

This table covers the Timing Cover bolts. Read more

ARP supplies the 4 Timing Cover Bolt parts for the 1964 Griffith 200.

This group includes ARP 1543202, ARP 1543201 and ARP 1543204 and the remaining parts above.

This table covers the gaskets that seal the Timing Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Timing Cover Gasket parts are listed for the 1964 Griffith 200, from FEL-PRO and VICTOR REINZ.

This group includes FEL-PRO TCS45008, FEL-PRO TCS45168 and VICTOR REINZ 151025301 and the remaining parts above.

This table covers the wear sleeves used to restore a Timing Cover seal surface. Read more

2 Timing Cover Repair Sleeve parts are listed for the 1964 Griffith 200, from FEL-PRO and VICTOR REINZ.

This group includes FEL-PRO 16213 and VICTOR REINZ 711346500.

This table covers the Timing Cover Repair Sleeve tools. This is a service tool, not a wear part — match the application in the notes. Read more

One part is listed for the 1964 Griffith 200 — VICTOR REINZ 711541700.

This table covers the Valve covers. Read more

This group shows a single part: ENGINE PRO 311684.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

7 Valve Cover Gasket parts are listed for the 1964 Griffith 200, from FEL-PRO and VICTOR REINZ. FEL-PRO VS13264T carries the "Popular" badge.

The Premium section: 2 options from FEL-PRO and VICTOR REINZ. FEL-PRO VS13264T is listed in this group.

The Standard Replacement section: 5 options from FEL-PRO and VICTOR REINZ. FEL-PRO VS50029C is listed in this group.

Listed part numbers: FEL-PRO VS13264T, VICTOR REINZ 151064301 and FEL-PRO VS50029C, plus the other parts above.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Valve Stem Seal parts are listed for the 1964 Griffith 200, from FEL-PRO and VICTOR REINZ.

Part numbers include FEL-PRO SS133641, FEL-PRO SS72562 and VICTOR REINZ 121005801, among others listed above.