This page lists 54 electrical parts for the 1981 Honda Prelude, across 11 part types, covering both the 1.6L L4 and the 1.8L L4. Every part shows its brand, manufacturer part number and fitment notes.
The electrical system on the 1981 Honda Prelude covers charging, starting and the sensors and modules the vehicle relies on, from alternator and starter to oxygen sensors. The largest groups are Alternator / Generator End Bearing (10 parts), Alternator / Generator (8 parts) and Flasher (8 parts). The other 8 part types cover the remaining 28 parts.
The 1981 Honda Prelude was sold with both the 1.6L L4 and the 1.8L L4. 4 parts fit every engine; the other 50 are engine-specific. Each part shows which engine(s) it fits.
19 brands supply electrical parts for the 1981 Honda Prelude, led by STANDARD MOTOR PRODUCTS (10 parts), ACDELCO (4 parts) and DEKA (4 parts), plus 16 more brands. Quality grades include Standard Replacement, 10 Amp and 15 Amp.
A "Popular" badge means the source catalog flagged the part as frequently chosen for the 1981 Honda Prelude. 10 parts have it, including PURE ENERGY 14158 (Alternator / Generator) and ACDELCO 203FF (Alternator / Generator End Bearing). Each part number opens a page with every vehicle that part fits.
Alternator / Generator
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| PURE ENERGY Popular Fits: 1.8L L4 | 14158 | 🇺🇸 US 🇨🇦 CA | Remanufactured | View on Amazon |
| PURE ENERGY Popular Fits: 1.8L L4 | 14131 | 🇺🇸 US 🇨🇦 CA | Remanufactured | View on Amazon |
| FVP Fits: 1.8L L4 | 14158 | 🇺🇸 US 🇨🇦 CA | Remanufactured | View on Amazon |
| FVP Fits: 1.8L L4 | 14131 | 🇺🇸 US 🇨🇦 CA | Remanufactured | View on Amazon |
| REMY Fits: 1.8L L4 | 14158 | 🇺🇸 US 🇨🇦 CA | Remanufactured | View on Amazon |
| REMY Fits: 1.8L L4 | 14131 | 🇺🇸 US 🇨🇦 CA | Remanufactured | View on Amazon |
| TERREPOWER Fits: 1.8L L4 | 14540 | 🇺🇸 US 🇨🇦 CA | Remanufactured | View on Amazon |
| TERREPOWER Fits: 1.8L L4 | 14131 | 🇺🇸 US 🇨🇦 CA | Remanufactured | View on Amazon |
This table covers the alternators that charge the battery and run the electrical load. Typical signs include dim lights at idle, a battery lamp, or a growl from the charging pulley. Load-test the battery and inspect the belt and grounds — a bad ground mimics a failed alternator.
8 Alternator / Generator parts for the 1981 Honda Prelude come from 4 brands — PURE ENERGY, FVP, REMY and 1 other brand. The "Popular" part is PURE ENERGY 14158.
This group includes PURE ENERGY 14158 and PURE ENERGY 14131 and the remaining parts above.
Alternator / Generator Brush
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ACDELCO Fits: 1.8L L4 | E732 | 🇺🇸 US 🇨🇦 CA | Professional | View on Amazon |
| WELLS Fits: 1.8L L4 | 5A1103 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the brushes inside the alternator.
2 Alternator / Generator Brush parts for the 1981 Honda Prelude come from 2 brands — ACDELCO and WELLS.
Part numbers include ACDELCO E732 and WELLS 5A1103.
Alternator / Generator End Bearing
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| WJB / INMOTION PARTS Fits: 1.8L L4 | RB62012RS | 🇺🇸 US 🇨🇦 CA | with Nippondenso Alternatorwith 50, 60 Amps Alternator | View on Amazon |
| WJB / INMOTION PARTS Fits: 1.8L L4 | RB62032RS | 🇺🇸 US 🇨🇦 CA | with Nippondenso AlternatorTwo Seal Style | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ACDELCO Popular Fits: 1.8L L4 | 203FF | 🇺🇸 US 🇨🇦 CA | Gold | View on Amazon |
| NATIONAL Popular Fits: 1.8L L4 | 203FF | 🇺🇸 US 🇨🇦 CA | Two Seal Stylewith Nippondenso Alternator | View on Amazon |
| BCA Fits: 1.8L L4 | NB203FF | 🇺🇸 US 🇨🇦 CA | with Nippondenso Alternatorwith 2 Seal Design | View on Amazon |
| BCA Fits: 1.8L L4 | NB201CC | 🇺🇸 US 🇨🇦 CA | with Nippondenso Alternatorwith 50, 60 Amps Alternator | View on Amazon |
| NATIONAL Fits: 1.8L L4 | 201CC | 🇺🇸 US 🇨🇦 CA | with Nippondenso Alternatorwith 50, 60 Amps Alternator | View on Amazon |
| SCHAEFFLER Fits: 1.8L L4 | 62032RSR | 🇺🇸 US 🇨🇦 CA | Fits Drive End12.000 mm Width | View on Amazon |
| SKF Fits: 1.8L L4 | 62032RSJ | 🇺🇸 US 🇨🇦 CA | Drive End | View on Amazon |
| SKF Fits: 1.8L L4 | 62012RSJ | 🇺🇸 US 🇨🇦 CA | Commutator End | View on Amazon |
This table covers the bearings in the alternator housing. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.
10 Alternator / Generator End Bearing parts are listed for the 1981 Honda Prelude, from WJB / INMOTION PARTS, NATIONAL, BCA and 3 other brands. ACDELCO 203FF carries the "Popular" badge.
In the Economy grade, WJB / INMOTION PARTS supplies 2 parts: the catalog's value-priced group. A representative part number is WJB / INMOTION PARTS RB62012RS.
The Standard Replacement section lists 8 options from NATIONAL, BCA, SKF and 2 other brands — built to original-equipment specification. ACDELCO 203FF is listed in this group.
Battery
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FULLRIVER Fits: 1.8L L4 | FT62051 | 🇺🇸 US 🇨🇦 CA | BCI Group 51(Length X Width X Height) 9.02 In x 5.43 In x 9.06 In | View on Amazon |
This table covers the batteries listed by group size and specification. Typical signs include slow cranking, a battery lamp, or a no-start after the vehicle sat overnight. Confirm group size and terminal layout in the notes. Clean the posts and the ground before condemning the battery.
One part is listed for the 1981 Honda Prelude — FULLRIVER FT62051.
Battery Cable
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ACDELCO Popular Fits: 1.8L L4 | 4BC30X | 🇺🇸 US 🇨🇦 CA | GoldInsulation Color: Black, Blue | View on Amazon |
| STANDARD MOTOR PRODUCTS Popular Fits: 1.8L L4 | A304U | 🇺🇸 US 🇨🇦 CA | 30" 4 Gauge | View on Amazon |
| DEKA Fits: 1.8L L4 | 00297 | 🇺🇸 US 🇨🇦 CA | Red4 Gauge | View on Amazon |
| DEKA Fits: 1.8L L4 | 00296 | 🇺🇸 US 🇨🇦 CA | Red4 Gauge | View on Amazon |
| STANDARD MOTOR PRODUCTS Fits: 1.8L L4 | 7324LC | 🇺🇸 US 🇨🇦 CA | Federal Wire | View on Amazon |
| UNITED MOTOR PRODUCTS Fits: 1.8L L4 | 4419 | 🇺🇸 US 🇨🇦 CA | 4-Gauge19" Length | View on Amazon |
| UNITED MOTOR PRODUCTS Fits: 1.8L L4 | 4219 | 🇺🇸 US 🇨🇦 CA | 19" Length4-Gauge | View on Amazon |
This table covers the positive and ground cables that run from the battery. Typical signs include a stretched or frayed cable, or a control that no longer reaches the end of its travel. Route the new cable through the same clips. A kinked cable binds and fails early.
7 Battery Cable parts for the 1981 Honda Prelude come from 4 brands — STANDARD MOTOR PRODUCTS, DEKA, UNITED MOTOR PRODUCTS and 1 other brand. The "Popular" part is ACDELCO 4BC30X.
Listed part numbers: ACDELCO 4BC30X, STANDARD MOTOR PRODUCTS A304U and DEKA 00297, plus the other parts above.
Battery Terminal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DEKA Fits: 1.8L L4 | 00350 | 🇺🇸 US 🇨🇦 CA | Top Post Terminal | View on Amazon |
| DEKA Fits: 1.8L L4 | 01056 | 🇺🇸 US 🇨🇦 CA | Top Post Terminal Lead Free | View on Amazon |
This table covers the terminals and clamps that connect cables to the battery posts.
DEKA supplies both parts for the 1981 Honda Prelude.
Listed part numbers: DEKA 00350 and DEKA 01056.
Flasher
Super Heavy-Duty Electronic
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BUSSMANN Fits: 1.8L L4 | 232 | 🇺🇸 US 🇨🇦 CA | Super Heavy-Duty FlasherSuper Heavy Duty Electronic, 12v, 2 terminal, 20amp, 1-10 bulbs | View on Amazon |
Thermal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BUSSMANN Popular Fits: 1.8L L4 | 552 | 🇺🇸 US 🇨🇦 CA | Thermal FlasherThermal, 12v, 2 terminal, 12.8amp, 2-6 bulbs | View on Amazon |
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS Popular Fits: 1.8L L4 | EFL552 | 🇺🇸 US 🇨🇦 CA | with Metal HousingElectronic Flasher | View on Amazon |
| STANDARD MOTOR PRODUCTS Fits: 1.8L L4 | EFL1 | 🇺🇸 US 🇨🇦 CA | with Plastic HousingElectronic Flasher | View on Amazon |
| TRIDON / NOVITA Fits: 1.8L L4 | LF12 | 🇺🇸 US 🇨🇦 CA | Loud Flasher2 Terminal | View on Amazon |
| TRIDON / NOVITA Fits: 1.8L L4 | LF12K | 🇺🇸 US 🇨🇦 CA | Loud Flasher | View on Amazon |
| WELLS Fits: 1.8L L4 | 1R2194 | 🇺🇸 US 🇨🇦 CA | Thermal FlasherTurn Signal | View on Amazon |
| WELLS Fits: 1.8L L4 | 1R2193 | 🇺🇸 US 🇨🇦 CA | Electronic FlasherTurn Signal | View on Amazon |
This table covers the flasher units that blink the turn signals and hazards.
8 Flasher parts are listed for the 1981 Honda Prelude, from BUSSMANN, STANDARD MOTOR PRODUCTS, TRIDON / NOVITA and 1 other brand. BUSSMANN 552 carries the "Popular" badge.
The Super Heavy-Duty Electronic section lists 1 option from BUSSMANN — grouped under the catalog's "Super Heavy-Duty Electronic" designation — the notes column spells out what sets them apart. BUSSMANN 232 is listed in this group.
The Thermal section lists 1 option from BUSSMANN — grouped under the catalog's "Thermal" designation — the notes column spells out what sets them apart. BUSSMANN 552 is listed in this group.
6 ungrouped parts are not assigned to a grade, with the same engine-level match.
Listed part numbers: BUSSMANN 552, BUSSMANN 232 and STANDARD MOTOR PRODUCTS EFL552, plus the other parts above.
Fuse
10 Amp
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BUSSMANN Fits: all 1981 Prelude engines | AGC10 | 🇺🇸 US 🇨🇦 CA | Fast Acting, 1/4 X 1-1/4 Inch, Glass Tube Fuse10 Amp | View on Amazon |
| LITTELFUSE Fits: all 1981 Prelude engines | AGC10 | 🇺🇸 US 🇨🇦 CA | Glass Fuse1/4" x 1-1/4" | View on Amazon |
15 Amp
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BUSSMANN Fits: all 1981 Prelude engines | AGC15 | 🇺🇸 US 🇨🇦 CA | Glass Fuse15 Amps | View on Amazon |
| LITTELFUSE Fits: all 1981 Prelude engines | AGC15 | 🇺🇸 US 🇨🇦 CA | Glass Fuse1/4" x 1-1/4" | View on Amazon |
This table covers the replacement fuses for this vehicle's fuse boxes. Typical signs include one circuit dead while its neighbor still works, or a fuse that blows again as soon as you replace it. Match amperage and fuse type. A repeat blow means a short — find it before the next fuse.
4 Fuse parts are listed for the 1981 Honda Prelude, from BUSSMANN and LITTELFUSE. All of them fit every engine offered in the 1981 Prelude.
The 10 Amp section lists 2 options from BUSSMANN and LITTELFUSE — grouped under the catalog's "10 Amp" designation — the notes column spells out what sets them apart. BUSSMANN AGC10 is listed in this group.
In the 15 Amp grade, BUSSMANN and LITTELFUSE supply 2 parts: grouped under the catalog's "15 Amp" designation — the notes column spells out what sets them apart. A representative part number is BUSSMANN AGC15.
Listed part numbers: BUSSMANN AGC10 and BUSSMANN AGC15, plus the other parts above.
Horn
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS Popular Fits: 1.8L L4 | HN17T | 🇺🇸 US 🇨🇦 CA | T-SeriesUniversal | View on Amazon |
| STANDARD MOTOR PRODUCTS Popular Fits: 1.8L L4 | HN18 | 🇺🇸 US 🇨🇦 CA | High Output Low Tone | View on Amazon |
| ACDELCO Fits: 1.8L L4 | E1905E | 🇺🇸 US 🇨🇦 CA | Gold2 Pin Connection | View on Amazon |
| STANDARD MOTOR PRODUCTS Fits: 1.8L L4 | HN19 | 🇺🇸 US 🇨🇦 CA | High Tone | View on Amazon |
| STANDARD MOTOR PRODUCTS Fits: 1.8L L4 | HN19T | 🇺🇸 US 🇨🇦 CA | T-Series | View on Amazon |
| STANDARD MOTOR PRODUCTS Fits: 1.8L L4 | HN20 | 🇺🇸 US 🇨🇦 CA | Low Tone | View on Amazon |
This table covers the horns mounted in the front of the vehicle.
6 Horn parts are listed for the 1981 Honda Prelude, from STANDARD MOTOR PRODUCTS and ACDELCO. STANDARD MOTOR PRODUCTS HN17T carries the "Popular" badge.
This group includes STANDARD MOTOR PRODUCTS HN17T, STANDARD MOTOR PRODUCTS HN18 and ACDELCO E1905E and the remaining parts above.
Starter Brush
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS Fits: 1.8L L4 | JX117 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the brushes inside the starter motor.
One part is listed for the 1981 Honda Prelude — STANDARD MOTOR PRODUCTS JX117.
Starter Motor
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BOSCH Fits: 1.8L L4 | SR156X | 🇺🇸 US 🇨🇦 CA | Remanufactured | View on Amazon |
| FVP Fits: 1.8L L4 | 16600 | 🇺🇸 US 🇨🇦 CA | Remanufactured | View on Amazon |
| PURE ENERGY Fits: 1.8L L4 | 16600 | 🇺🇸 US 🇨🇦 CA | Remanufactured | View on Amazon |
| REMY Fits: 1.8L L4 | 16600 | 🇺🇸 US 🇨🇦 CA | Remanufactured | View on Amazon |
| TERREPOWER Fits: 1.8L L4 | 16600 | 🇺🇸 US 🇨🇦 CA | Remanufactured | View on Amazon |
This table covers the starter motors that crank the engine. Typical signs include no motion, a squeal, or a motor that only runs on one speed. Confirm power, ground and the control module before replacing the motor.
5 Starter Motor parts for the 1981 Honda Prelude come from 5 brands — BOSCH, FVP, PURE ENERGY and 2 other brands.
Part numbers include BOSCH SR156X and FVP 16600, among others listed above.
Buying Electrical Parts for a 1981 Honda Prelude
On this vehicle, the electrical system covers charging, starting and the sensors and modules the vehicle relies on, from alternator and starter to oxygen sensors.
- Match the engine first. Some electrical parts fit every engine; others are engine-specific. Each row shows which engine(s) it fits.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, clean or renew the battery terminals and grounds with any charging-system repair.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Alternator / Generator End Bearing and Alternator / Generator .
Frequently Asked Questions
How many electrical parts fit the 1981 Honda Prelude?
Our catalog currently lists 54 electrical parts for the 1981 Honda Prelude across 11 subcategories and 19 brands, covering both the 1.6L L4 and the 1.8L L4. Each part is matched to the engine(s) it fits.
Do electrical parts differ between 1981 Honda Prelude engines?
Some do. 4 parts fit every engine; the other 50 are engine-specific. Each row (and the filter at the top) shows which. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.
What are the signs of electrical problems on a 1981 Honda Prelude?
Common symptoms include slow cranking on cold mornings, a battery light that flickers, dim lights at idle, or a check-engine code pointing at a sensor circuit. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, clean or renew the battery terminals and grounds with any charging-system repair.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1981 Honda Prelude was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 1981 Honda Prelude?
First match the engine — each row shows which engine(s) the part fits. Then test before replacing — a failed alternator and a bad ground can look identical, and sensors are frequently condemned for wiring faults. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 1981 Honda Prelude
Electrical Parts for Other Honda Prelude Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.