4 Steering parts are listed for the 1981 Honda Prelude, in 3 part types, covering both the 1.6L L4 and the 1.8L L4. Each one has a brand, a manufacturer part number and notes that say where it fits.
On the 1981 Honda Prelude, the steering system connects driver to road through the rack, pump, tie rods, and column components. All 4 listed parts are Tie Rod End (2 parts), Rack and Pinion Bushing (1 part) and Steering Damper Bellows (1 part).
The 1981 Honda Prelude was sold with both the 1.6L L4 and the 1.8L L4. Every part on this page is engine-specific. Each part shows which engine(s) it fits.
The most listed brands for 1981 Honda Prelude steering parts are TRW (2 parts), ULTRA-POWER (1 part) and TREADSAVER (1 part). Quality grades include Daily Driver and Economy.
Each part number listed for the 1981 Honda Prelude opens a page with every vehicle that part fits.
Rack and Pinion Bushing
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| TRW Fits: 1.6L L4 | HB1190 | 🇺🇸 US 🇨🇦 CA | Steering Gear Mounting BushingExcept POWER STEERING, RH | View on Amazon |
This table covers the Rack and Pinion bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles.
This group shows a single part: TRW HB1190.
Steering Damper Bellows
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ULTRA-POWER Fits: 1.6L L4 | K9311 | 🇺🇸 US 🇨🇦 CA | Bellows Kit | View on Amazon |
This table covers the Steering Damper bellows.
One part is listed for the 1981 Honda Prelude — ULTRA-POWER K9311.
Tie Rod End
Daily Driver
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| TRW Fits: 1.6L L4 | ES2095R | 🇺🇸 US 🇨🇦 CA | OuterFront | View on Amazon |
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| TREADSAVER Fits: 1.6L L4 | ES2095R | 🇺🇸 US 🇨🇦 CA | Outer | View on Amazon |
This table covers the inner and outer tie-rod ends that steer each front knuckle. Typical signs include play on center, a feathered front tire, or a boot that has split and packed with grit. Replace inner and outer ends together on a high-mileage axle, then get an alignment.
2 Tie Rod End parts are listed for the 1981 Honda Prelude, from TRW and TREADSAVER.
The Daily Driver section lists 1 option from TRW — grouped for everyday commuting duty. TRW ES2095R is listed in this group.
In the Economy grade, TREADSAVER supplies 1 part: the catalog's value-priced group. A representative part number is TREADSAVER ES2095R.
Part numbers include TRW ES2095R, among others listed above.
Buying Steering Parts for a 1981 Honda Prelude
On this vehicle, the steering system connects driver to road through the rack, pump, tie rods, and column components.
- Match the engine first. Every steering part here is engine-specific; each row shows which engine(s) it fits.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the inner and outer tie-rod ends together on higher-mileage vehicles, then get an alignment.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Tie Rod End and Rack and Pinion Bushing .
Frequently Asked Questions
How many steering parts fit the 1981 Honda Prelude?
Our catalog currently lists 4 steering parts for the 1981 Honda Prelude across 3 subcategories and 3 brands, covering both the 1.6L L4 and the 1.8L L4. Each part is matched to the engine(s) it fits.
Do steering parts differ between 1981 Honda Prelude engines?
Yes. Every steering part on this page is engine-specific. Each row shows which engine(s) it fits — use the filter at the top to hide the rest. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.
What are the signs of steering problems on a 1981 Honda Prelude?
Common symptoms include play or looseness on center, a whine when turning, fluid weeping from rack boots, or uneven tire wear on the front axle. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace the inner and outer tie-rod ends together on higher-mileage vehicles, then get an alignment.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1981 Honda Prelude was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 1981 Honda Prelude?
First match the engine — each row shows which engine(s) the part fits. Then flush old power-steering fluid when replacing a pump or rack — grit in the old fluid is the number-one cause of repeat failure. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 1981 Honda Prelude
Steering Parts for Other Honda Prelude Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.