1982 Honda Civic Engine Parts

This table covers the Auxiliary valves. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

This group shows a single part: ITM ENGINE COMPONENTS RV9278.

This table covers the wear sleeves used to restore a Camshaft seal surface. Read more

This group shows a single part: SCHAEFFLER SR3460.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

18 Camshaft Seal parts for the 1982 Honda Civic come from 14 brands — NATIONAL, BCA, SCHAEFFLER and 11 other brands. The "Popular" part is APEX ATC1120. 3 parts fit every engine; the other 15 are engine-specific.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

4 Connecting Rod Bearing parts are listed for the 1982 Honda Civic, from ITM ENGINE COMPONENTS, MAHLE / CLEVITE and TOPLINE.

Part numbers include ITM ENGINE COMPONENTS 4B1950, ITM ENGINE COMPONENTS 4B1951 and MAHLE / CLEVITE CB1223P, among others listed above.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

6 Conversion / Lower Gasket Set parts are listed for the 1982 Honda Civic, from AJUSA, APEX, BECK/ARNLEY and 1 other brand.

Part numbers include AJUSA 54035300, AJUSA 54035500 and AJUSA 54035800, among others listed above.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

7 Crankshaft Main Bearing parts for the 1982 Honda Civic come from 3 brands — KING ENGINE BEARINGS, ITM ENGINE COMPONENTS and TOPLINE.

The High Performance section lists 2 options from KING ENGINE BEARINGS — engineered beyond original-equipment specification. KING ENGINE BEARINGS MB5168XP is listed in this group.

In the Standard Replacement grade, ITM ENGINE COMPONENTS and KING ENGINE BEARINGS supply 2 parts: built to original-equipment specification. A representative part number is ITM ENGINE COMPONENTS 5M1952.

3 further parts sit outside the graded sections, with the same engine-level match.

Part numbers include KING ENGINE BEARINGS MB5168XP, KING ENGINE BEARINGS MB5168XPX and ITM ENGINE COMPONENTS 5M1952, among others listed above.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

9 Crankshaft Repair Sleeve parts for the 1982 Honda Civic come from 5 brands — NATIONAL, BCA, SCHAEFFLER and 2 other brands. The "Popular" part is NATIONAL 99139.

Part numbers include NATIONAL 99139, BCA NS99139 and BCA NS99315, among others listed above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

11 Crankshaft Seal parts for the 1982 Honda Civic come from 8 brands — NATIONAL, BCA, WJB / INMOTION PARTS and 5 other brands. The "Popular" part is ITM ENGINE COMPONENTS 1500902. 2 parts fit every engine; the other 9 are engine-specific.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Cylinder Head Gasket parts are listed for the 1982 Honda Civic, from AJUSA, APEX, MAHLE / CLEVITE and 1 other brand.

Listed part numbers: AJUSA 10018900, AJUSA 10025400 and AJUSA 10017700, plus the other parts above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

7 Cylinder Head Gasket Set parts are listed for the 1982 Honda Civic, from AJUSA, ITM ENGINE COMPONENTS, APEX and 2 other brands.

Listed part numbers: AJUSA 52062400, AJUSA 52120200 and APEX AHS1001, plus the other parts above.

This table covers the wear sleeves used to restore a Cylinder seal surface. Read more

MELLING supplies the 4 Cylinder Repair Sleeve parts for the 1982 Honda Civic.

Part numbers include MELLING CSL704A, MELLING CSL604A and MELLING CSL605A, among others listed above.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

7 Engine Kit Gasket Set parts are listed for the 1982 Honda Civic, from AJUSA, ITM ENGINE COMPONENTS, APEX and 1 other brand.

Listed part numbers: AJUSA 50070400, AJUSA 50133800 and AJUSA 50165600, plus the other parts above.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

4 Exhaust Valve parts for the 1982 Honda Civic come from 4 brands — BECK/ARNLEY, ITM ENGINE COMPONENTS, SEALED POWER and 1 other brand. 2 parts fit every engine; the other 2 are engine-specific.

Listed part numbers: BECK/ARNLEY 0213163, ITM ENGINE COMPONENTS RX9265 and SEALED POWER V2342X, plus the other parts above.

This table covers the Expansion plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

9 Expansion Plug parts are listed for the 1982 Honda Civic, from QUALCAST, PIONEER, DORMAN and 1 other brand. DORMAN 116203 carries the "Popular" badge.

Part numbers include DORMAN 116203, MELLING MPE153BR and PIONEER PE153, among others listed above.

This table covers the Intake & Exhaust Manifold gasket sets. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

3 Intake & Exhaust Manifold Gasket Set parts are listed for the 1982 Honda Civic, from AJUSA, APEX and VICTOR REINZ. All of them fit every engine offered in the 1982 Civic.

Part numbers include AJUSA 13064800, APEX AMS1010 and VICTOR REINZ 111083701.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Intake Manifold Gasket parts are listed for the 1982 Honda Civic, from AJUSA and ITM ENGINE COMPONENTS.

This group includes AJUSA 13042000 and ITM ENGINE COMPONENTS 0950917.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

2 Intake Valve parts for the 1982 Honda Civic come from 2 brands — ITM ENGINE COMPONENTS and MELLING. 1 part fits every engine; the other 1 is engine-specific.

Part numbers include ITM ENGINE COMPONENTS RV9334 and MELLING V5109.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

7 Motor Mount parts for the 1982 Honda Civic come from 4 brands — ANCHOR, PIONEER, DEA / MARMON RIDE CONTROL and 1 other brand. The "Popular" part is DEA / MARMON RIDE CONTROL A2450. 5 parts fit every engine; the other 2 are engine-specific.

This group includes DEA / MARMON RIDE CONTROL A2450, ANCHOR 8012 and ANCHOR 8022 and the remaining parts above.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

22 Oil parts for the 1982 Honda Civic come from 2 brands — MOBIL and VALVOLINE. The "Popular" part is MOBIL 125195.

The Conventional section lists 2 options from VALVOLINE — grouped under the catalog's "Conventional" designation — the notes column spells out what sets them apart. VALVOLINE 797671 is listed in this group.

The Full Synthetic section lists 8 options from MOBIL — full-synthetic oils. MOBIL 125195 is listed in this group.

In the High Mileage (>75,000 Miles) grade, MOBIL and VALVOLINE supply 9 parts: oils grouped for high-mileage engines. A representative part number is MOBIL 125202.

The Synthetic Blend section lists 3 options from MOBIL — synthetic-blend oils. MOBIL 124406 is listed in this group.

This table covers the Oil Cooler Mounting kits. Read more

HAYDEN supplies both parts for the 1982 Honda Civic. All of them fit every engine offered in the 1982 Civic.

This group includes HAYDEN 238 and HAYDEN 153.

This table covers the drain plugs in the oil pan. Read more

4 Oil Drain Plug parts for the 1982 Honda Civic come from 2 brands — DORMAN and AGS. Every part fits both the 1.3L L4 and the 1.5L L4.

This group includes AGS ODP00019, DORMAN 090040 and DORMAN 65221 and the remaining parts above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Oil Drain Plug Gasket parts are listed for the 1982 Honda Civic, from DORMAN and AJUSA. All of them fit every engine offered in the 1982 Civic.

Listed part numbers: AJUSA 22009300, DORMAN 097831CD and DORMAN 095023, plus the other parts above.

This table covers the caps on the oil filler neck. Read more

This group shows a single part: MOTORAD MO106.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

15 Oil Filter parts for the 1982 Honda Civic come from 11 brands — VARIOUS MFR, CHAMP / LUBER-FINER, FAMOUS BRAND and 8 other brands. The "Popular" part is VARIOUS MFR PG4651. Every part fits both the 1.3L L4 and the 1.5L L4.

The Economy section lists 11 options from CHAMP / LUBER-FINER, FAMOUS BRAND, VARIOUS MFR and 6 other brands — the catalog's value-priced group. VARIOUS MFR PG4651 is listed in this group.

Standard Replacement: 4 parts, from VARIOUS MFR, WIX, FRAM and 1 other brand. A representative part number is VARIOUS MFR PG4651EX.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Oil Pan Gasket parts for the 1982 Honda Civic come from 3 brands — AJUSA, APEX and ITM ENGINE COMPONENTS. 2 parts fit every engine; the other 1 is engine-specific.

Part numbers include AJUSA 14029600, APEX AOP101 and ITM ENGINE COMPONENTS 0990902.

This table covers the Oil pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit. Read more

This group shows a single part: ITM ENGINE COMPONENTS 057870.

This table covers the pistons that travel in each cylinder. Typical signs include knock, blow-by, or a cylinder that will not hold compression. Piston work is a short-block job. Match bore, pin and ring pack in the notes — not the photo. Read more

One part is listed for the 1982 Honda Civic — ITM ENGINE COMPONENTS RY6161.

This table covers the rings that seal each piston to the cylinder wall. Read more

11 Piston Ring parts are listed for the 1982 Honda Civic, from HASTINGS MANUFACTURING, SEALED POWER, MAHLE / CLEVITE and 2 other brands. SEALED POWER E438KC carries the "Popular" badge.

The Premium section lists 2 options from SEALED POWER and MAHLE / CLEVITE — a step above OE specification in materials, tolerances or warranty terms. SEALED POWER E438KC is listed in this group.

The Standard Replacement section: 4 options from HASTINGS MANUFACTURING, SEALED POWER and TOPLINE. HASTINGS MANUFACTURING 2C6173 is listed in this group.

5 ungrouped parts are not assigned to a grade, with the same engine-level match.

This table covers the rocker arms that transfer cam motion to the valves. Read more

This group shows a single part: ITM ENGINE COMPONENTS 0566012.

This table covers the Thrust washers. Read more

3 Thrust Washer parts for the 1982 Honda Civic come from 3 brands — ITM ENGINE COMPONENTS, KING ENGINE BEARINGS and MAHLE / CLEVITE.

Listed part numbers: ITM ENGINE COMPONENTS 1T1952, KING ENGINE BEARINGS TW110AM and MAHLE / CLEVITE TW327S.

This table covers the Timing belts. Typical signs include squeal on cold start, cracked ribs, or glazing. Spin the tensioner and idlers by hand while the belt is off. Read more

13 Timing Belt parts are listed for the 1982 Honda Civic, from CONTINENTAL, BANDO, ITM ENGINE COMPONENTS and 7 other brands. ITM ENGINE COMPONENTS 4063 carries the "Popular" badge.

Economy: 3 parts, from ITM ENGINE COMPONENTS, CLOYES and CONTINENTAL. A representative part number is ITM ENGINE COMPONENTS 4063.

The Standard Replacement section: 7 options from CONTINENTAL, BECK/ARNLEY, BANDO and 3 other brands. BECK/ARNLEY 0260179 is listed in this group.

3 ungrouped parts are not assigned to a grade, with the same engine-level match.

This table covers the Timing Belt pulleys. Typical signs include a growl or chirp that follows engine speed, or a pulley that will not spin freely by hand. Spin each pulley with the belt off. Roughness or play means replace it with the belt. Read more

2 Timing Belt Pulley parts for the 1982 Honda Civic come from BECK/ARNLEY. Every part fits both the 1.3L L4 and the 1.5L L4.

Listed part numbers: BECK/ARNLEY 0513860 and BECK/ARNLEY 0513954.

This table covers the Timing Belt tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

6 Timing Belt Tensioner parts for the 1982 Honda Civic come from 4 brands — INA, S.A. GEAR, CLOYES and 1 other brand.

Part numbers include CLOYES 95019 and INA ZT9021, among others listed above.

This table covers the tensioners that keep the timing chain taut. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

This group shows a single part: ITM ENGINE COMPONENTS 60020.

This table covers the gaskets that seal the Timing Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Timing Cover Gasket parts for the 1982 Honda Civic come from 2 brands — APEX and FEL-PRO.

Part numbers include APEX ATC1010, APEX ATC1011 and FEL-PRO TCS45759.

This table covers the wear sleeves used to restore a Timing Cover seal surface. Read more

This group shows a single part: SKF 99138.

This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Timing Cover Seal parts for the 1982 Honda Civic come from 2 brands — ITM ENGINE COMPONENTS and SKF. 1 part fits every engine; the other 1 is engine-specific.

Part numbers include ITM ENGINE COMPONENTS 1506101 and SKF 13946.

This table covers the Torque Strut bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

4 Torque Strut Bushing parts for the 1982 Honda Civic come from 2 brands — DEA / MARMON RIDE CONTROL and PIONEER. Every part fits both the 1.3L L4 and the 1.5L L4.

Part numbers include DEA / MARMON RIDE CONTROL A6535, DEA / MARMON RIDE CONTROL A6536 and PIONEER 632817, among others listed above.

This table covers the Torque Strut mounts. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

3 Torque Strut Mount parts are listed for the 1982 Honda Civic, from ANCHOR, PIONEER and WESTAR. 2 parts fit every engine; the other 1 is engine-specific.

Part numbers include ANCHOR 8525, PIONEER 658525 and WESTAR EM8525.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

7 Valve Cover Gasket parts for the 1982 Honda Civic come from 4 brands — FEL-PRO, BECK/ARNLEY, APEX and 1 other brand. The "Popular" part is BECK/ARNLEY 0361266. 4 parts fit every engine; the other 3 are engine-specific.

Part numbers include BECK/ARNLEY 0361266, FEL-PRO VS50217R1 and APEX AVC101S, among others listed above.

This table covers the Valve Cover grommets. Read more

5 Valve Cover Grommet parts for the 1982 Honda Civic come from 5 brands — FEL-PRO, APEX, BECK/ARNLEY and 2 other brands. The "Popular" part is FEL-PRO ES70337. 4 parts fit every engine; the other 1 is engine-specific.

Listed part numbers: FEL-PRO ES70337, APEX AES100 and BECK/ARNLEY 0396607, plus the other parts above.

This table covers the pressed-in bronze and cast-iron guides that align valve stems. Typical signs include oil smoke on startup, a guide that has gone oval, or a valve that no longer seats quietly. Guides are a machine-shop fit. Confirm stem diameter in the notes before ordering. Read more

11 Valve Guide parts for the 1982 Honda Civic come from 3 brands — ITM ENGINE COMPONENTS, QUALCAST and SBI. The "Popular" part is ITM ENGINE COMPONENTS VG875CI. 5 parts fit every engine; the other 6 are engine-specific.

This table covers the Valve seats. Read more

6 Valve Seat parts are listed for the 1982 Honda Civic, from QUALCAST, PIONEER, DURA-BOND and 1 other brand. DURA-BOND 31054 carries the "Popular" badge. 5 parts fit every engine; the other 1 is engine-specific.

Part numbers include DURA-BOND 31054, QUALCAST 21125052 and PIONEER 38510, among others listed above.

This table covers the springs that close each intake and exhaust valve. Typical signs include a sagging corner, a broken coil, or a clunk from the spring pocket. Replace springs in axle pairs and inspect the seats. Read more

ITM ENGINE COMPONENTS supplies the 3 Valve Spring parts for the 1982 Honda Civic.

This group includes ITM ENGINE COMPONENTS VS1152, ITM ENGINE COMPONENTS VS1133 and ITM ENGINE COMPONENTS VS1134.

This table covers the keepers that lock each valve-spring retainer to the stem. Read more

2 Valve Spring Retainer Keeper parts are listed for the 1982 Honda Civic, from ITM ENGINE COMPONENTS and PIONEER. 1 part fits every engine; the other 1 is engine-specific.

Part numbers include ITM ENGINE COMPONENTS 051134 and PIONEER PF234.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

7 Valve Stem Seal parts for the 1982 Honda Civic come from 5 brands — ITM ENGINE COMPONENTS, MAHLE / CLEVITE, SBI and 2 other brands. The "Popular" part is SBI 1221136. 3 parts fit every engine; the other 4 are engine-specific.

Part numbers include SBI 1221136, APEX AVS1001 and ITM ENGINE COMPONENTS SS168, among others listed above.