1982 Honda Civic Ignition Parts

This table covers the distributors that route spark. Read more

3 Distributor parts for the 1982 Honda Civic come from 2 brands — AUTOLINE and CARDONE. 1 part fits every engine; the other 2 are engine-specific.

Part numbers include AUTOLINE D8001, AUTOLINE D8003 and CARDONE 31804.

This table covers the Distributor caps. Typical signs include a leak at the neck, a cap that will not hold pressure, or a missing tether. Match the pressure rating or thread in the notes — radiator, reservoir and fuel caps are not interchangeable. Read more

11 Distributor Cap parts for the 1982 Honda Civic come from 4 brands — WELLS, STANDARD MOTOR PRODUCTS, BECK/ARNLEY and 1 other brand. The "Popular" part is WELLS 3D1149A. 10 parts fit every engine; the other 1 is engine-specific.

The Economy section lists 1 option from STANDARD MOTOR PRODUCTS — the catalog's value-priced group. STANDARD MOTOR PRODUCTS JH110T is listed in this group.

In the Premium grade, WELLS supplies 2 parts: a step above OE specification in materials, tolerances or warranty terms. A representative part number is WELLS 3D1149A.

In the Standard Replacement grade, WELLS, STANDARD MOTOR PRODUCTS, BECK/ARNLEY and 1 other brand supply 8 parts: built to original-equipment specification. A representative part number is STANDARD MOTOR PRODUCTS JH110.

This table covers the Distributor Pickup coils. Typical signs include a misfire that follows one cylinder, or a snap in damp weather. Swap with a neighbor to confirm, and replace a torn boot with the coil. Read more

One part is listed for the 1982 Honda Civic — STANDARD MOTOR PRODUCTS LX515.

This table covers the Distributor rotors. Typical signs include shudder under braking, or a lip at the outer edge. Do not put new pads on a rotor that is below minimum thickness. Read more

8 Distributor Rotor parts for the 1982 Honda Civic come from 3 brands — WELLS, STANDARD MOTOR PRODUCTS and WALKER PRODUCTS. The "Popular" part is WELLS 4R1105A. Every part fits both the 1.3L L4 and the 1.5L L4.

The Economy section: 1 option from STANDARD MOTOR PRODUCTS. STANDARD MOTOR PRODUCTS JR89T is listed in this group.

Premium: 2 parts, from WELLS. A representative part number is WELLS 4R1105A.

Standard Replacement: 5 parts, from STANDARD MOTOR PRODUCTS, WELLS and WALKER PRODUCTS. A representative part number is STANDARD MOTOR PRODUCTS JR72.

Listed part numbers: WELLS 4R1105A, STANDARD MOTOR PRODUCTS JR89T and WELLS 4R1125A, plus the other parts above.

This table covers the seals at the Distributor. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 1982 Honda Civic — DORMAN 917136.

This table covers the vacuum-advance units on the distributor. Read more

One part is listed for the 1982 Honda Civic — WELLS 4V1246.

This table covers the coils that fire each spark plug. Typical signs include a misfire that follows one cylinder, a snap in damp weather, or a coil that is swollen or cracked. Swap a suspect coil with a neighbor to confirm, then replace boots that tore on the way off. Read more

12 Ignition Coil parts are listed for the 1982 Honda Civic, from STANDARD MOTOR PRODUCTS, UNITED MOTOR PRODUCTS, SKP and 7 other brands. SKP SKUC12 carries the "Popular" badge. All of them fit every engine offered in the 1982 Civic.

Economy: 6 parts, from SKP, STANDARD MOTOR PRODUCTS, B&B and 3 other brands. A representative part number is SKP SKUC12.

The Standard Replacement section: 6 options from UNITED MOTOR PRODUCTS, STANDARD MOTOR PRODUCTS, ACDELCO and 2 other brands. STANDARD MOTOR PRODUCTS UC12 is listed in this group.

This table covers the brackets that mount the Ignition Coil Mounting. Typical signs include a cracked mount, a rattle, or a bracket that no longer holds alignment. Confirm position in the notes. Many brackets look alike and bolt to different corners. Read more

2 Ignition Coil Mounting Bracket parts for the 1982 Honda Civic come from 2 brands — STANDARD MOTOR PRODUCTS and UNITED MOTOR PRODUCTS. Every part fits both the 1.3L L4 and the 1.5L L4.

This group includes STANDARD MOTOR PRODUCTS CB1 and UNITED MOTOR PRODUCTS CB2.

This table covers the Ignition control modules. Read more

4 Ignition Control Module (ICM) parts are listed for the 1982 Honda Civic, from WELLS, STANDARD MOTOR PRODUCTS and WAI GLOBAL. All of them fit every engine offered in the 1982 Civic.

Part numbers include STANDARD MOTOR PRODUCTS LX515, WAI GLOBAL HM761 and WELLS 6H1115, among others listed above.

This table covers the lock cylinders in the ignition switch. Read more

3 Ignition Lock Cylinder parts are listed for the 1982 Honda Civic, from BECK/ARNLEY, STANDARD MOTOR PRODUCTS and WELLS. All of them fit every engine offered in the 1982 Civic.

Listed part numbers: BECK/ARNLEY 2011425, STANDARD MOTOR PRODUCTS US202L and WELLS 4H1227.

This table covers the spark plugs for this engine. Typical signs include misfire under load, rough idle, or a flashing check-engine light. Verify the gap even on pre-gapped plugs, and replace coil boots that come off a high-mileage engine. Read more

20 Spark Plug parts for the 1982 Honda Civic come from 7 brands — CHAMPION, DENSO, ACDELCO and 4 other brands. The "Popular" part is ACDELCO R44XL. 15 parts fit every engine; the other 5 are engine-specific.

The Copper / Nickel section lists 9 options from CHAMPION, ACDELCO, AUTOLITE and 4 other brands — grouped under the catalog's "Copper / Nickel" designation — the notes column spells out what sets them apart. ACDELCO R44XL is listed in this group.

The Double Platinum (lasts up to 3x longer than Copper / Nickel) section lists 3 options from ACDELCO, CHAMPION and DENSO — grouped under the catalog's "Double Platinum (lasts up to 3x longer than Copper / Nickel)" designation — the notes column spells out what sets them apart. ACDELCO 41804 is listed in this group.

In the Iridium (lasts up to 4x longer than Copper / Nickel) grade, DENSO and CHAMPION supply 4 parts: grouped under the catalog's "Iridium (lasts up to 4x longer than Copper / Nickel)" designation — the notes column spells out what sets them apart. A representative part number is CHAMPION 9804.

The Platinum (lasts up to 2x longer than Copper / Nickel) section lists 4 options from CHAMPION, ACDELCO and DENSO — grouped under the catalog's "Platinum (lasts up to 2x longer than Copper / Nickel)" designation — the notes column spells out what sets them apart. ACDELCO 4 is listed in this group.

This table covers the non-foulers that space a spark plug away from oil fouling. Read more

One part is listed for the 1982 Honda Civic — DORMAN 42004.

This table covers the Spark Plug wires. Read more

7 Spark Plug Wire parts are listed for the 1982 Honda Civic, from STANDARD MOTOR PRODUCTS, B&B, NGK and 1 other brand. NGK 8008 carries the "Popular" badge. 4 parts fit every engine; the other 3 are engine-specific.

Economy: 2 parts, from B&B and STANDARD MOTOR PRODUCTS. A representative part number is B&B S428335.

In the High Performance (Lowest Resistance) grade, B&B supplies 1 part: engineered beyond original-equipment specification. A representative part number is B&B R410028335.

The Premium section: 2 options from NGK and STANDARD MOTOR PRODUCTS. NGK 8008 is listed in this group.

The Standard Replacement section: 2 options from STANDARD MOTOR PRODUCTS and WALKER PRODUCTS. STANDARD MOTOR PRODUCTS 29483 is listed in this group.

Listed part numbers: NGK 8008, B&B S428335 and STANDARD MOTOR PRODUCTS 4721, plus the other parts above.