2000 Honda Insight Drivetrain Parts

Engine:
995cc L3 ELECTRIC/GAS

12 Drivetrain parts are listed for the 2000 Honda Insight, in 4 part types, covering the 995cc L3 ELECTRIC/GAS engine. Each one has a brand, a manufacturer part number and notes that say where it fits.

On the 2000 Honda Insight, the drivetrain system moves power from transmission to wheels through axles, CV joints, driveshafts, differentials and wheel-end hardware. 11 parts of the 12 listed are CV Axle (4 parts), Differential Carrier Bearing / Race (4 parts) and CV Joint Boot (3 parts). The other 1 part type covers the remaining 1 part.

CV Axle

Brand Part Number Markets Notes Buy
GSP NCV36106
🇺🇸 US 🇨🇦 CA
Front Left
View on
Amazon
TOP NOTCH TN50168
🇺🇸 US 🇨🇦 CA
Front Left
View on
Amazon
TRAKMOTIVE HO8446
🇺🇸 US 🇨🇦 CA
Front Right
View on
Amazon
TRAKMOTIVE HO8447
🇺🇸 US 🇨🇦 CA
Front Left
View on
Amazon

This table covers the complete CV axle shafts from differential (or hub) to wheel. Typical signs include a click in tight turns, grease flung around the wheel well, or a vibration that builds with speed. A torn boot caught early is a boot kit; caught late it is the whole axle. Torque the axle nut to the method in the notes.

CV Joint Boot

Brand Part Number Markets Notes Buy
BECK/ARNLEY 1032980
🇺🇸 US 🇨🇦 CA
Front Outer
View on
Amazon
MEVOTECH DX628
🇺🇸 US 🇨🇦 CA
Front Inner
View on
Amazon
MEVOTECH DX636
🇺🇸 US 🇨🇦 CA
Front Outer
View on
Amazon

This table covers the boots that keep grease in a CV joint. Typical signs include a split boot, grease flung around the joint, or a click once grit is inside. A boot caught early is a kit. Once the joint has clicked, the joint itself is usually worn.

Differential Carrier Bearing / Race

Brand Part Number Markets Notes Buy
BCA NB208S
🇺🇸 US 🇨🇦 CA
Manual trans.
View on
Amazon
SCHAEFFLER 6207Z
🇺🇸 US 🇨🇦 CA
Manual trans.17 MM Width
Fitment notes — SCHAEFFLER 6207Z
Manual trans.17 MM Width72 mm Outside Diameter35 mm Inside Diameter
View on
Amazon
SKF 6207ZJ
🇺🇸 US 🇨🇦 CA
Manual trans.
View on
Amazon
TIMKEN 207S
🇺🇸 US 🇨🇦 CA
0.6693 in. Width
Fitment notes — TIMKEN 207S
0.6693 in. Width
Manual trans.
View on
Amazon

This table covers the bearings and races that support the differential carrier.

Gear Oil

Brand Part Number Markets Notes Buy
IDEMITSU 30018100750
🇺🇸 US
10W30 Rotary Racing Oil1 Quart
View on
Amazon

This table covers the gear oils specified for the axle or transfer case. Typical signs include a low-oil lamp, knocking, or oil that has gone thin before the next interval. Match the viscosity and spec in the notes, not just the weight on the bottle.

Buying Drivetrain Parts for a 2000 Honda Insight

On this vehicle, the drivetrain system moves power from transmission to wheels through axles, CV joints, driveshafts, differentials and wheel-end hardware.

  • Confirm you have the 995cc L3 ELECTRIC/GAS engine — every part on this page is matched to it.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace the differential or transfer-case fluid with any axle or seal job while everything is already open.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: CV Axle and Differential Carrier Bearing / Race .

Frequently Asked Questions

How many drivetrain parts fit the 2000 Honda Insight?

Our catalog currently lists 12 drivetrain parts for the 2000 Honda Insight across 4 subcategories and 10 brands, covering the 995cc L3 ELECTRIC/GAS engine. Each part is matched to the engine(s) it fits.

What are the signs of drivetrain problems on a 2000 Honda Insight?

Common symptoms include clicking in tight turns, a clunk when shifting between drive and reverse, vibration that builds with speed, or gear oil on the inside of a wheel. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What should I replace at the same time?

Where labor overlaps, replace the differential or transfer-case fluid with any axle or seal job while everything is already open.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2000 Honda Insight was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 2000 Honda Insight?

Every part on this page is matched to the 995cc L3 ELECTRIC/GAS engine. Then a torn CV boot caught early is a cheap boot kit; caught late it is a whole axle — inspect before deciding which to buy. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 2000 Honda Insight

Drivetrain Parts for Other Honda Insight Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.